Fail-Proof Moccasin Pattern-Making Taught by Métis Home Ec Teacher

Native American Crafts
28 followers
AI Generated·May contain errors
Today we're going to learn how to make a moccasin pattern
that will fit your foot or anyone else's
foot just by tracing the foot on a piece of paper
and working out from there. There will be a tiny
bit of math involved but I promise this method is fail proof.
I have done this activity with teachers
and with students in grades 10 and 11
and this pattern works. So stay with me,
we're going to get started.
First we need to think about our supplies. I've got scissors,
A basic 30 centimeter or 12 inch ruler
and something that I can use to ensure my angles
are straight and geometrically perfectly 90 degrees
when I draft my pattern.
Once I have my supplies gathered, oh yeah, and I have a pen.
Once I have my supplies gathered,
I'm going to stand on a piece of paper, nice big piece
of paper.
This is a little bit smaller than ledger size or A3.
And I'm going to trace around my foot.
A couple things about tracing your foot.
Get all the bumps you can. Bumps are fine.
We're going to deal with bumps in a second.
But just be careful not to dig in too closely on your insole
because that's not really how your foot works.
So you want to keep your pen pretty vertical while you trace.
And then we'll sort it out after that.
So once I have my foot traced,
by stepping on it and tracing around with a marker,
I need to smooth this out.
I don't need a lumpy bumpy moccasin, that's a little bit silly.
So here we can decide what shape we want.
I kind of like a pointier, girlier moccasin,
so I'm going to show you that one first and
then I'll show you how to make it a little bit rounder next.
Remember we're making these out of leather, and leather stretches.
So you can smooth out
and delete any strange bumps that you may have on your foot.
It's okay because
The leather's going to forgive you.
It's going to stretch and mold around your foot.
We will cover supplies right away in one of the very next videos.
Make sure you hit subscribe so you know when that one comes out.
Ooh la la.
Okay, so this is a shape I like.
It's a bit more pointy.
Not everyone's going to love that shape.
So what we might need to do is if there's someone
who wants a rounder shape,
again, it's okay.
It's leather.
Don't cut off the big toe that much.
I'll play with the shape differently so that you get a different shape.
Okay?
Make sense?
So you would pick one of these profiles,
or if you want to get weird, you can, I guess.
Can't guarantee your success if you do that though.
So once I have that traced out,
I've traced it on a nice clean piece of paper so that
there's no confusion about what shape I'm dealing with.
Again, if yours is a rounder toe,
don't worry about it, it's going to be the exact same
steps.
Now before I go any further, I want
to show you what it's going to look like when it's
all the way done.
So here's where we're headed for.
This is my finished moccasin pattern.
You'll see all the numbers on it. Those are just ways to
navigate through as I am building it, which we're going to get to.
This then folds up at the back.
The little heel flap folds up.
This side will all curl up around your toe and you can see how that
becomes a little shoe shoe. Okay, so that's where we're headed.
I'm going to leave one of these up
in the corner and highlight the steps we're working
on to make it extra easy peasy. Here we go.
First things first, we want to find the very center of our foot shape.
There's a couple ways I can do that.
The very easiest way, although it confuses my high schoolers,
is to simply fold it in half
and try to match as much of these straighter sides
as I possibly can throughout the foot.
So I can see through my paper
because I used heavy black marker.
And that would be the center line of my foot in this case.
Yes, there's more toe on this side than this side. That is okay.
We're really only looking from here down.
We want to make sure it's centered.
Another way I could find the center and I could test my folded line
is to measure a few places across the foot.
Now yours is going to measure
different, right? These are not hard and fast
measurements. These are just my feeties.
So from here to the end is about six
centimeters, so we'll put a dot at 6 cm, so we'll put a dot at 3 cm.
Up here, it's 7 1⁄2, so that would be 3 3⁄4,
and one more stop with 9, so I'm going to hit 4 1⁄2.
Now that is pretty close to my fold, and I can connect those two.
I'll go that way next.
Fantastic!
Now I can label 1 and,
and what I'm labeling is this point of intersection here.
This point of intersection, we're going to call the point.
We've now labeled point 1 and point 2.
Now we're on a roll. Now we just keep building.
Point three is three and a half centimeters above point one.
So I'm measuring from that crossroads.
I'm measuring up three and a half centimeters to point three.
I'll label it.
Next up, point four is one centimeter above point two.
Take this guy down here. Measure up.
And these numbers aren't going to matter later.
They're just to help you navigate around
your pattern while you're building it.
Now, fun part, you get to square out.
What I mean by squaring out is you're going to find something square,
It could even be a book.
A book is just fine.
Anything that's perfectly square.
or another piece of paper.
Put the corner of your square right on the point.
And then make sure one side of your square
is very much along a straight line.
That way, when I draw out this way, and I draw out this way,
I know that in here and in here is a perfect right angle,
so now I've got 0.6 and 0.7 without
even measuring.
Okay?
Math is not for everyone.
Actually, it is.
It totally is.
All right.
On to 0.5.
I'm not sure why I skipped 0.5
when I put this all together, but we're going to do 0.5
now.
So 0.5 is one and a half centimeters below 0.2.
Oops, I'm
on inches here.
0.5.
Now we've got 4, 5, 6, 7, so we need 8.
8 is halfway between 1 and 2.
So this is another one where your numbers are going to be different
because your foot is a different size
and even the shape of your moccasin is a different size.
I'm going to measure from one intersection to the other.
On mine, it's 23 centimeters,
so that means 11.5 is my center point, 0.8.
And then I can square out from 0.8.
I realize I'm going fast but I
also hate videos where people take far too long to do everything.
Like I can pause but skipping through
until I realize I've missed something
it's annoying. I'm trying to not be annoying.
Pause at will. So number eight I'm gonna square
out in both directions.
Same thing I put the point of my square on that intersection.
Make sure the other side of my square
is running perfectly alongside that vertical line and
I can square out.
Now I've got nine, eleven now.
Eleven is halfway between one and eight.
Again, your measurement will be different.
On mine, it's eleven and a half.
So that would be five and three quarters.
You can see why I work in metric.
It's a heck of a lot easier to do the math.
Go metric.
We've got 0.11 here.
Now I can square out to find 12 and 13.
Same as I did on 8.
I'm going to square out
from 11 in both
directions to find 13.
All right, now we've got 12 and 13
and I'm squaring out liberally because I am going
to figure out where this border is.
Just you wait.
I don't really care if these lines are too long for now.
Better too long than too short.
I don't have to redraw them that way.
14.
We are on to 14.
14 is 4 centimeters away from 12 along the same line.
So I'm going to measure from 12
and pick up my ruler
and then I'm going to square down
from 14, this line a little
longer because I want them
to intersect eventually,
square
down from 14.
Now 6, this is a fun one,
this is a fun one, 6 to 15 and 7 to 16.
is half of 6
to 7 plus 0.5 centimeters.
That sounds like a lot of math, I'm going to say it again.
The distance from 6 to 15 and from 7 to 16 is the distance
from 6 to 7 divided by 2 plus half a centimeter.
Again, this is why metric.
I'm going to measure
from 6 to 7, 3.2.
Half of 3.2 is 1.6, plus 0.5 is 2.1, so I know I need
to drop down 2.1 from each of these.
2.1,
2.1.
The reason I didn't draw a line right away is because I want
to make sure again that it's perfectly square,
and how far down to come.
So again, that is 6 to 15, and 7.
Okay, now we get to square out from 15.
17 and from 16 to 18.
How are we gonna square out
from 16 and know where 18 is
supposed to be though?
If this is 17, how do we know how far to draw this line? We
haven't done anything over here yet.
Don't worry, I got you. We're gonna measure
from 17 to 15. Here it's 6.6.
We'll do the same distance over here.
Again, making
It is the squarest it can possibly be,
and that is 18.
Now, to find this side,
I'm going to square up from 18 to find 19.
And there's a reason we build it going around in a circle like that.
We need the same distance from the center on each side,
which is not necessarily, depending on your foot
and the shape you've chosen,
the same distance from each of these points.
I used to do it that way, and it made problems.
We don't, we have enough problems
in our world right now. We don't need that.
So I'm going to square up from 18
and that means I can label 19.
Okay? Okay. 20 and 21 now.
20 and 21
are one centimeter above 15.
So we just need to measure up
one centimeter to get 20, 21.
Now we can draw in our heel curve.
If you have a hard time with curves,
if you are curve challenged, I find like a roll of tape,
a small roll of scotch tape really draws
that heel curve in really nicely.
And remember on our finished one here,
that heel curve will eventually flip up at the back
to create a nice finish on your shoe.
That's what you just drew there.
Then we're going to label point 22,
the one point you didn't label.
And now we need to draw a curve around the top.
Which will be the section of the shoe that curls up around your foot.
To do that we want to make sure it's fairly consistent.
So up here we know that this is 3.5 centimeters away.
So if we start with that as a measurement.
Always measuring perpendicular out from the curve.
We'll get a pretty even road all the way around.
I've got a pencil here and I'll show
you what I often see in my students.
Things get really narrow they kind of try to go straight up there.
And then they come straight down here.
And you can see how this is wide, narrow, wide, narrow, wide.
We really don't want to do that.
We want to keep it a nice, even,
even road the whole way around for the most part.
I'm going to go back to drawing those dots
at three and a half centimeters.
The other thing, if you're doing it this way,
be careful you're not angling.
Weirdly, try to always make sure the line
of your ruler is right on the line of your
pattern so that you end up with a distance
that is truly from the edge of your foot.
This is the part people get mad at me
because after saying everything has to be so exact,
I change my mind a little bit.
Here's my rough line, here's my rough line,
but what we actually want to do is pull this
curve in.
You see how it's kind of sharp here?
I'm going to pull it in.
About two and a half centimeters below 14
and it's going to come more down like this.
And then up here this looks pretty extreme
and it is so it's okay to shallow that a little
bit.
More than anything you want a nice clean curve.
I got a little bump there.
Smooth that out.
But that is pretty much it.
When you're done you're
going to cut out,
I'll just show you,
before you cut out you
should add your notches.
I'm sorry I forgot this, here you go guys.
I'm going to do one here.
And notches are just little triangles that we cut into our patterns
so that when we line
them up with other pattern pieces,
we know which bits need to match with which bits.
So I've got five notches, two on each side and one at the very top.
And that is important.
Once you've got that,
you're going to cut along this red line here, including these
two little snips.
Or leave that red line.
You know what I mean?
The line that passes through number five,
not the line that passes through number two.
Oh, Miss Chambers, Chambers, there we go.
When you're done that, I also insist people trace
another pattern piece.
So on another piece of paper, a separate piece of paper,
you're gonna trace what becomes the top of your moccasin,
and you're gonna put notches on that.
When you're done that piece, it'll just look like this.
When you're all done, you should have two pieces.
This piece will become your leather piece and your lining.
This will become your vamp.
In my next video we'll talk about how to do the beadwork on the vamp.
After that I'll show you step by step how
to put your moccasins together
and where to get some supplies for that.
That's it for today. Congratulations you
have finished your moccasin pattern.
You do not need to do the other foot
because if you just flip it over you've got the other foot.
Next time we're going to be looking at the materials we need
and where to get them.
Hopefully I'll have some kits you can order put together by then
and I look forward to
seeing what you can do.
Take care.
