Diy Pearl Bag Tutorial | Full Bead Weaving Masterclass

Secret Life of Pearls
4 followers
1 Video View·Nov 17, 2026
In this full step-by-step tutorial, we are creating a premium pearl bead bag completely from scratch! 👜✨ This gorgeous piece looks like it’s straight out of a high-end designer campaign, but the best part is that you can easily make it with your own hands.
AI Generated·May contain errors
Video Summary
AI GeneratedThis tutorial provides a comprehensive guide to crafting a luxurious pearl bag using 8mm acrylic beads and clear fishing line. The process covers everything from weaving the main panel and side walls to constructing the handle and adding optional hardware, making it accessible for beginners.
Hi everyone it's Helga.
Today we are going to create this luxurious pearl bag together.
It looks like it's straight out of a high-end designer campaign.
It seems absolutely flawless
but the great news is that you can easily recreate it
with your own hands.
In this video I'll show you
the complete detailed step-by-step process from the very first row
to attaching the handle and hardware.
Don't worry about the scale of the project.
I've broken down the entire masterclass into super simple,
clear steps, so you can weave at your own comfortable pace.
You can absolutely do this, even if it's your first bag.
We're using standard 8mm acrylic pearl beads today.
And you'll just need around 1,700 beads to complete this piece.
For the line, I highly recommend using a clear fishing line that is 0.5
or 0.6 mm thick.
Mine is a bit thinner today,
but I wanted to film this tutorial for you so badly.
Cut a comfortable working length of line, about 5 feet long.
String your first four beads and center them on the line.
Take one end of the line
and pass it back through the last bead to form a small loop.
Thread the other end of the line right through
this loop and pull it tight.
Make sure to tug that resulting knot
directly into the center of the bead.
There we go. Our very first cross is complete.
Now string two beads onto the left line
and one bead onto the right line.
Take the line with the two beads
and pass it back through the outer bead to create a loop.
Slip
the other line through
this loop and pull it tight.
Hiding the knot inside the bead again.
Our second cross is done.
For the third cross, we repeat the process.
Two beads on the left, one on the right.
Loop through the side with two.
Pull the other line through
and secure the knot inside the bead.
Repeat these steps
until you have a
total of 16 crosses.
Now, we're going to turn to start the second row.
To do this, string three beads onto one side of the line.
Form a loop in the last bead and
thread the other line through it.
Let's begin row two.
Keep your weaving in the exact same position as mine.
On the top line, string three beads
and make a loop through the last bead.
Thread the bottom line through
this loop and pull it tight.
Now take the left end of the
line and pass it downward
through the closest bead
from our previous row.
Next, add two beads to the right side
and make a loop in the outer bead.
Pass the left line
through the loop
and tighten
it firmly.
Then, pass that left line downward through
the next closest bead of the previous row.
Add two more beads to the right side.
Form a loop.
Pull the left
line through.
Tighten it and guide the left line down into the next bead.
Continue moving down the row
by adding two beads at a time.
This is the foundation of our second row.
Let me quickly show you what to do if you're running out of line.
First, let's hide these working ends.
Tighten your last cross.
Then weave the ends through the adjacent beads
so they meet up right next to each other.
Tie a loop knot,
making sure the other
end of the line stays
inside the loop,
and pull that knot securely into the bead.
To make it extra secure, weave a bit further and
tie another knot
in a different bead.
Pull the lines tight
and clip off
the excess.
Cut a fresh piece of line,
thread it through the beads where
you left off, and even out the ends.
At the end of the second row, here is how we turn into row 3.
In this position,
string two beads onto the left line and form a loop in the last bead.
Pass the other line
through the loop.
For convenience,
flip your beadwork
upward.
Row 3 is exactly like row 2.
First, add three beads to the top line,
loop through the last one, and pass the other line through.
Once tightened,
guide the left line down into the
closest bead from the previous row.
Then add two beads to the right side,
loop them, tighten and guide the left line down
into
the
next
base
bead.
Keep weaving two beads at a time all the way to the end of the row.
At the end of the third row, string
two beads onto the left side to turn.
Flip the panel upward again
and keep building your rows.
Quick tip here, you need to pull each cross really tight,
which can make your fingers
a bit sore.
To make it way more comfortable,
put some adhesive bandages on your fingers before you
start.
Your productivity
will skyrocket.
We keep adding rows until we have a total of 27 rows.
This gives us a finished main panel of 17 by 27 crosses.
Now count 11 crosses in from each side and fold the panel over.
The five crosses left in the middle will form
the flat bottom of our bag.
Next we are going to weave the side panels to close the bag.
In this position, take a new piece of line
and thread it through the two corner beads.
Even out the ends.
Add two beads to the top line and form a loop in the outer bead.
Thread the bottom
line through this
loop and tighten.
Now thread that bottom line to the right,
through the nearest bead of the bag's bottom
Once again, add two beads
to the top line, loop it, pass
the bottom line through,
and tighten.
Guide the bottom line to the right into the next bottom bead.
Repeat this step two more times.
At this
point,
besides
passing
through
the bottom
bead,
guide your line upward through the adjacent side bead as well.
Add just one bead to either end of the line,
form a loop, and pass the other line through.
Once tightened, thread the right line upward
into the next closest bead.
Now, we do the exact same thing but move in the opposite direction.
Add two beads to the top line
and pass through the closest bead to the left from our previous row.
At the
end
of the
row,
connect
it
to the
side
bead
and
add
one
final
bead.
Continue this way
to fill the entire
side space all
the way to the top.
Then, repeat the exact same process on the other side of the bag.
The main body structure
is complete.
Take the side panel
and pinch it neatly
inward like this.
Let's secure it at the top.
Grab a new piece of line with one bead already strung onto it.
Thread the ends of the line upward
into the third beads from the top edge.
Add
another
bead
using
a
loop.
Guide the ends upward through the next closest beads.
Add another
bead.
And guide the ends up again.
Finally,
add one
last bead
through
a loop.
This gives us a neat
vertical post of four beads,
which is exactly where we'll build our handle.
We'll weave in a circle around
this cross.
Add three beads to one side of the line and make a loop.
Pull the
other line
through.
Once tightened, pass the bottom line
into the closest bead of the row below.
Add two beads to the top line, loop it
and pull the other line through,
pass the bottom
line into the next
lower bead.
Repeat this one more time,
looping through
the last bottom bead
and connecting it back
to the
beginning
of the row.
Add one bead through
a loop to close the round.
To continue building the handle column, repeat the process.
Three beads to start the row,
loop, weave down, add two beads,
loop and finally close
The round with one bead.
Keep going until your handle reaches the desired length.
Do the identical steps on the other side of the bag.
Let's quickly jump into making the top flap
while the sun is still hitting the frame beautifully.
Count to the fourth bead from the back edge
and thread a new piece of line through it.
Start by adding three beads
to the left side through a loop.
Once tightened,
guide the bottom line to the right through the next bead from here.
Keep adding two beads per cross,
just like we did for the main bag panel.
Do this for ten
crosses.
On the eleventh
cross, we turn
by adding two beads
to the left side.
Start the next row by adding
three beads to the right side.
And then continue
with two beads
per cross all the way down.
Fill this
top flap
for a total
of nine
rows. Now
let's get
back to the
handles.
We need a total of twenty-one rows,
combined from the left and right sides.
Leave the working line on just one side
so we can sew the two handle pieces together.
Add one bead to each line, then pass the ends in opposite directions,
through the corresponding bead on the opposite handle piece.
Bring the lines
out to position
them for the next
full cross.
Let me
flip
it
around
so you
can
see it
better.
Add one bead, crossing the lines through it.
Thread
the ends
downward
to form the
next cross.
Add one final bead, crossing the lines through it.
This locks the handles into a perfect cross pattern.
Give this entire connection joint an extra pass with your line.
To make
it super
strong,
outro and
hardware
touch
everything
is fully
secured.
Now I'm going to add some hardware.
This part is completely optional
because the bag looks absolutely gorgeous on its own.
I'm going to attach a classic chain strap using
these two removable gate rings.
Spring rings.
Just clip them onto the sides
of the bag and hook on the chain.
Oh, and let me show you this amazing find.
This isn't specifically made for this bag,
but you can easily find a felt purse organizer
insert that matches your bag's dimensions.
It fits right inside and instantly makes the bag
so much more functional.
If you loved this tutorial and found it helpful,
please give this video a thumbs up and I'll
see you in the next one.
Bye!
