#Classiccars#Supercar # Vintagecars #Review At SEMA 2026 in Las Vegas, a factory from Baoying, China rented booth 24595 and filled it with brand-new steel bodies for the Ford Bronco, the Mustang, the Land Cruiser and the Datsun 240Z.
This is the story of the classic car you can now build from a brand-new shell: who makes these bodies, how a sixty-year-old car is stamped again from bare steel, why rust makes the body the part that decides whether a classic lives or dies, and why American companies have quietly been selling licensed reproduction bodies for about twenty years. Plus the 2015 federal law that allows up to 325 turnkey replicas a year, the Beijing company bringing retro cars to the LA Auto Show on November 19, and what all of it means for the value of original classic cars.
AI Generated·May contain errors
Las Vegas, the first week of November.
Inside the Las Vegas Convention Center,
the biggest gathering of the American aftermarket
car business opens its doors.
The SEMA Show, 3rd to 6th of November, 2026.
More than 2,000 brands, more than a million square
feet of exhibits. No ticket booth for the public,
no families with strollers, no salesman pushing
a lease on a hatchback.
This is the show for the people who build cars, the hot rod shops,
The restorers.
The parts makers, the people who keep the old Chevys,
The.
the old Fords and the old Jeeps
of this country alive.
And in the central hall, there is a booth
with a number worth remembering.
Booth 24595.
It does not belong to Ford.
It does not belong to General Motors.
It does not belong to a family body shop in Ohio
or a parts warehouse in California.
It belongs to a factory in Baoying,
a county in eastern China, about three hours north
North of Shanghai by train.
And the booth is full of something
that would have sounded like science fiction to a restorer
20 years ago.
Brand new steel bodies, not restored,
not patched, not dragged out of a barn and welded
back together, stamped from flat sheet metal,
welded and coated for cars that have not been
built in decades.
The first generation Ford Bronco,
the Toyota Land Cruiser, the Land Rover Defender, the
The 1967 Ford Mustang, the Datsun 240Z, the Toyota AE86,
And here is the detail that tells you this is not a curiosity.
One of those Bronco bodies, built in that factory in China,
became the heart of an American restomod
that reportedly sold at a major American auction
for $400,000. $400,000 for a Ford Bronco.
The most American off-roader ever made,
sitting on a body that came out of a stamping plant
on the other side of the world.
Now, before anything else, it is important to be precise,
because precision is the whole point of this story.
That factory does not sell finished cars.
It does not ship a Bronco that you turn the key on.
It sells the body, the shell,
the steel skeleton that everything else bolts onto.
But that shell is not a small part.
For a classic car, the body is the part
that decides whether the car lives or dies.
And once you have a new one,
an American shop can turn it into a complete, running, driving classic.
So when people say China is selling brand new classic cars in America,
what they really mean is this.
China is selling the one piece that used to make a classic
car impossible to save.
And the rest of the car is being built right here.
And the factory at booth 24595 is not the only one.
On the 19th of November,
a different Chinese company will walk into the Los Angeles Auto Show
with complete, running cars that look like they rolled out of 1958.
And it is looking for American partners to build them here.
If you care about where the classic car world is going,
And what all of this does to the value
of the originals sitting in American garages right now,
hit like and subscribe to the channel.
It tells the platform this kind of story is worth telling,
and it keeps the next one coming.
So let us start with the factory itself.
The company is called Jiangsu Junchang Vehicle Industry.
Almost nobody in America had heard of it until very recently.
It sits in Baoying, in Jiangsu province,
in the kind of quiet industrial town
that most of the world never thinks about.
Metal workshops, stamping plants,
places that make the parts inside cars, not the cars themselves.
Doors, floors, brackets, reinforcements.
Huge volumes, tight tolerances, very little glamour.
And at some point, someone inside that world looked at the global
car market and noticed something strange.
All over the planet, there are people who love one specific old car.
Often they already own most of it.
They have the engine, they have the transmission.
They have the axles, the seats, the gauges,
the steering wheel, the paperwork.
What they do not have is a body that has not been eaten alive by rust.
And the companies that built those cars are not interested in helping.
The original tooling is long gone.
The presses that stamped those panels
were scrapped or reused decades ago.
So the question was simple.
What if somebody built the bodies again?
Not as a fiberglass copy.
Not as a kit that only looks like the car from 20 feet away.
A real steel body.
Made the way the original was made,
ready to take the original engine and the original parts.
That is what Jun Cheng decided to do.
And look at the list of cars they chose.
The first generation Ford Bronco, the one built from 1966 to 1977.
The Toyota Land Cruiser 40
series, the boxy 4x4 that went everywhere and never seemed to break.
The original Land Rover
Defender. The Datsun 240Z,
one of the most loved Japanese classics in America.
The Toyota AE86, the little Corolla Coupe
that a whole generation fell in love with
through drifting, and the 1967 Ford Mustang,
the pony car, the heart of American car culture.
And the list is not finished.
The company has announced two more projects
that sound almost unbelievable.
The Porsche 911 of the 964 generation,
the air-cooled 911 of the late 80s and early 90s,
and the Mercedes 300 SL Gullwing.
A car Mercedes built in tiny numbers in the 1950s.
A car that sells for millions at auction.
A car its own maker would never dream of reproducing.
A small factory in Baoying is talking about stamping new bodies for it.
The prices are where the story starts to get serious.
A new AE86 or 240Z body starts at around $9,500.
The Mustang shell runs about $16,000.
And the Bronco is the one that has already become a real business.
More than 600 bodies built so far, roughly 200 a year,
and most of them shipped to one country,
the United States. And that is exactly why
the factory came to Las Vegas, not to show off,
to sell. SEMA is not a show for the public.
It is a show for the businesses that build and restore
cars, the shop owners who decide
which parts go into a customer's project, the distributors who
stock warehouses, the dealers
who sell to restorers in every corner of the country.
A booth at SEMA is not a museum display,
it is a shop window, placed exactly where the
buyers walk past.
And the buyers who walk past it are the same people
who will decide whether the next restored
Bronco at your local
car show is sitting on a body from an American supplier or on a body
from Bao Ying.
That is also why the choice of cars is so revealing.
Every model on that list has one thing in common,
huge demand and a shrinking supply
of honest, original bodies.
Nobody is stamping new bodies for cars that nobody wants.
They are stamping bodies for the cars that people are fighting over.
So how do you build a 1968 Bronco in 2026?
It starts with original cars, honest,
straight, factory-correct examples.
One is taken apart completely.
Every panel, every bracket, every reinforcement,
every little piece of steel that holds the car together.
Each piece is scanned in three dimensions.
So the factory has a perfect digital copy of the original part.
The original car becomes the reference
that everything new is checked against.
The holes have to line up. The gaps have to be right.
The body has to sit exactly where the original sat.
Then comes the hard part. The dies.
A die is the giant steel mold that a stamping press uses to turn a flat
sheet of metal into a door, a fender, a roof, a floor pan.
Every single panel needs its own die.
And a classic car body is not a handful of big panels.
It is hundreds of pieces.
So a single body means hundreds of dies.
Each one is carved out of hard steel by computer-controlled machines,
and then a craftsman finishes the surface by hand,
sanding and polishing until it is right.
Only then does the steel go in.
The panels are stamped.
They are trimmed.
They are placed into jigs,
the huge fixtures that hold every piece in exactly the right position,
and they are welded together into a body.
Then the body is treated against corrosion and primed.
Modern corrosion protection,
the kind that simply did not exist when these cars were new.
Think about what that investment means.
Hundreds of dies, each one a precision tool for a car
that might sell a few hundred bodies a year.
That math does not work for a giant car company.
It only works for a factory that already does stamping all day long,
already has the machines, already has the skilled workers,
and is willing to play a long game in a small market.
And that brings us to the real reason this business exists at all.
Because to understand why a new body matters so much,
you have to understand what actually
kills a classic car. It is not age, it is not accidents, it is rust.
A car can be 50 years
old and run perfectly. An engine can be rebuilt.
A transmission can be rebuilt. Brakes, wiring,
upholstery, gauges,
all of that can be replaced or restored by a good shop.
But the body is the car. The body is what the serial number lives on.
The body is what holds the suspension in place,
what keeps the doors closed, what keeps the car straight. And steel
from the 1960s was not protected the way steel is protected today.
Picture a first-generation Bronco
that spent 40 winters on salted roads in the Midwest,
or a Mustang that sat for 20 years in a field
with water pooling in the floors every spring.
The outside might still look like a car, but the floors are gone,
the rockers are gone, the lower fenders,
the quarter panels, the cowl, the places where water
sits and never dries, all of it has turned
into something closer to lace than to metal.
For decades, a car like that had two possible futures.
The first was a full restoration with endless patch panels,
cutting out the rotten steel piece
by piece, and welding in new metal, hour after hour after hour.
A good shop can do it. But the
bill is enormous, and on most cars
the labor alone cost more than the finished car would ever be worth
The second future was the scrapyard, or the parts pile.
And that is what happened to a huge number of these cars.
They were not crashed. They were not abandoned,
because people stopped loving them.
They simply rusted past
the point where saving them made financial sense.
A brand new body changes that math completely.
Suddenly the owner of a rotten Bronco does not have
to choose between a bottomless restoration
and the crusher. He can take the engine,
the axles, the transmission, the seats,
Everything that still works, and move it onto a fresh,
straight, rust-protected shell.
Months of metalwork replaced by one delivery.
That is why the body is not just another part.
It is the part that decides whether a classic lives or dies.
Now here is the part of this
story that almost nobody talks about.
And it changes how the whole thing looks.
America has been doing this for about 20 years.
Brand new steel bodies for classic cars are not
a Chinese invention. An American company called Dynacorn has
been selling new reproduction bodies
since around 2005, and not in some legal shadow.
Licensed by the original car makers themselves,
General Motors, Ford, Chrysler.
The list reads like a car show on a summer night.
The Chevy Camaro. The Pontiac Firebird. The Chevelle. The Chevy Pickup.
The Dodge Challenger, the Bronco, the Mustang.
Ford went even further. In 2012, Ford announced
a brand new body for the 1967 Mustang Convertible,
built under Ford license. It was described as the
fourth reproduction body licensed by Ford Motor Company,
and you could order it starting at $15,995.
A brand new 1967 Mustang Convertible body, with Ford's blessing.
More than 10 years before anybody
was talking about a factory in Baoying,
General Motors did the same thing.
A brand new 1968 Camaro Coupe body, officially licensed by GM,
all steel, listed at around $18,000.
And the first generation Bronco has an American source too.
Dennis Carpenter, a well-known name in Ford restoration parts,
offers early Bronco bodies
officially licensed by Ford,
assembled at its facility in Concord, North Carolina.
So stop for a second, and think about what that means.
The idea of building a new body for an old car is not new.
Detroit itself signed off on it.
Ford put its name on a new 67 Mustang convertible shell.
GM put its name on a new 68 Camaro.
The American restoration industry has
been quietly building new old cars for two decades.
So what is actually new about booth 24595?
Two things.
Who is making the bodies?
And under what terms?
The first difference is the price, and the scale behind it.
Look at the Mustang. A new licensed Mustang convertible body,
back in 2012, started just under $16,000.
The Mustang shell from Baoying today runs about
$16,000 as well. Roughly the same number,
more than a decade later, after everything in the
world has become more expensive,
and a factory that stamps panels for modern cars all day
can spread the cost of its machines and its workers across
a far bigger operation than a specialist reproduction shop ever could.
The second difference is the license.
The American reproduction bodies carry the approval of the
companies that designed the cars. The bodies from Baoying do not.
And that is where this story walks
into a gray area. The shells from Juncheng carry
no manufacturer badges, no Ford logo,
no Toyota logo, no Land Rover logo. The company's argument is simple.
These designs are more than 25 years old,
and the bodies carry none of the original branding.
Whether that argument holds up is a much more complicated question.
Trademarks, registered designs
and other protections work differently from country to country.
There is no single magic age at which an old
car's shape becomes free for anybody to copy
everywhere in the world.
A carmaker that still sells a vehicle under the same name,
like the Bronco or the Mustang, has reasons to care about how that name
And there is a second gray area.
One that matters a lot to anybody who buys these cars later.
In America, a car's identity lives
in its vehicle identification number,
the VIN, and in the title that goes with it.
The body is the part that carries that identity.
So what happens when the original body is thrown away,
and the original VIN ends up on a brand new shell?
That is not a simple question,
and the answer can change from state to state.
Is it still the same car, legally?
Is it a rebuilt car? Is it something else?
The rules were written for a world where
a new body for a 1968 Bronco did not exist.
Now it does, and the paperwork is struggling to keep up.
None of that is settled here.
Nobody outside a courtroom can say who is right.
But while the lawyers argue in the abstract,
the bodies keep coming off the line,
the containers keep crossing the ocean,
and the customers keep ordering.
And there is one more piece of this puzzle
that most people have never heard of.
A federal law that opened the door
to brand new classic cars built right here in America.
In 2015, tucked inside
a big federal transportation bill called the FAST Act,
a law became official with a long name,
the Low Volume Motor Vehicle Manufacturers Act.
Here is what it does.
A small car company, one that builds
no more than 5,000 vehicles a year worldwide,
can build and sell up to 325 replica cars a year in the United States.
Complete cars. Turnkey. You pay, you get the keys, you drive away.
The key condition on the design is
that the car has to look like a vehicle that was produced
at least 25 years ago. Those replicas are
exempt from modern crash testing,
but they do have to meet current emissions standards. That means a
replica can look like a car from 1965,
while the engine under the hood has to be clean by today's
rules. And the builders have to register
with the safety regulators at NHTSA. With the EPA,
And with the California Air Resources Board,
before they sell a single car.
The rules to actually make that law work took years to arrive.
The regulators had to write them, and the first sales
only got moving years after the law itself was passed.
But the result is something that would
have sounded impossible a generation ago.
In America today, it is legal to buy a brand new
car that looks like a classic, built from scratch,
by a small company, up to 325 of them a year per builder.
Now put those three pieces side by side.
Licensed new bodies from American companies for 20 years.
A federal law that allows small builders
to sell complete replica classics.
And now a factory from China selling new bodies at a lower price,
without a license, straight into the American market.
The classic car you can build from scratch is no longer a fantasy.
It is an industry, and it is growing
from more than one direction at once.
Which brings us to the second Chinese company,
the one that does not sell bodies at all.
It is called Full Good Motor.
It comes from Beijing, and it used to be known as Songsan Motors,
and it builds something very different
from what you see at booth 24595.
Not shells for old cars. Complete new cars that look like old ones.
Its best-known model is called the SS Dolphin.
From a distance, it looks like a first-generation
Corvette. The C1 from 1958. The rounded body.
The chrome. The proud grille.
The proportions of a car you would expect
to see parked outside a diner with a jukebox inside.
But under that shape, it is a modern plug-in hybrid,
a car that only borrows the look of the 50s
and keeps the technology of today.
And according to one report,
in China it costs more than a brand new Corvette Z06.
On the 19th of November,
Full Good Motor makes its first appearance in the United States
at Automobility LA,
the industry and press day of the Los Angeles Auto Show.
The show itself then runs from the 20th to the 29th of November,
and the car the company has announced
for its stand is not the Corvette lookalike.
It is a model called the Summer,
a seven-seat people carrier with the look of a 1950s van.
But the car is not really the point.
The point is what the company says it is looking for.
Partners. American partners for assembly,
for distribution, for investment.
The idea that has been reported is to ship the cars in component form
and have them assembled
in the United States, then sold
and registered under the brand of an American partner.
The company's own announcement puts it plainly.
Whether its cars are ever available
in America depends entirely on the partnerships it finds
in Los Angeles.
And one of its senior executives, Irali Kai,
summed up the pitch in one sentence.
If an American manufacturer builds
and sells our designs under its own brand,
That is good for their workers and good for our customers.
Nobody knows yet how that week in Los Angeles will go.
Maybe Full Good finds a partner.
Maybe it goes home with nothing but business cards.
That chapter has not been written.
But look at the two companies together.
In Las Vegas, a factory
from China selling brand new bodies for the Bronco,
the Land Cruiser, the Defender and the Mustang,
and looking for American dealers.
In Los Angeles,
A carmaker from China showing brand new cars inspired
by the American 50s and looking for American partners.
Two different businesses. Two different ideas. The same target.
The American love affair with the cars of the past.
So here is the question that the title of this video asks.
Why can't Detroit stop it?
Why are the people stamping new Bronco bodies
in Beiyang and not in Michigan?
The first answer is volume.
A giant car company is built to make hundreds
of thousands of the same vehicle.
Its factories, its suppliers, its accountants,
everything is designed around scale.
A classic body that sells 200 units a year
is not a business for a company like that.
It is a rounding error.
Hundreds of dies, years of engineering,
for a product line smaller than what one big
assembly plant builds in a single shift.
On a balance sheet measured in billions, it simply does not register.
The second answer is that Detroit already made
its choice, a long time ago.
Ford stopped building the first Bronco in 1977.
When the Bronco name came back,
it came back on a completely new vehicle, in 2021.
Screens, electronics, modern safety,
built for a new generation of buyers.
A good truck, by most accounts.
But not the Bronco your father drove to the lake with the top off.
The Mustang kept its name, but it grew bigger,
heavier, and more digital with every generation.
Land Rover ended the original Defender in 2016
and replaced it with a modern premium SUV.
Every one of these companies moved on to new customers,
new technology, and new profits.
And when a giant company moves on from a car
that millions of people still love, it leaves a gap.
The same pattern shows up with the Land Cruiser.
The simple, boxy 40 series,
the one farmers and ranchers and explorers drove into the ground,
grew over the decades into a big, comfortable, expensive luxury 4x4.
Nothing wrong with that.
It is what the market paid for.
But the people who wanted the simple old truck
were left with only one option.
Find an original and fight the rust.
Every one of these stories ends the same way.
The carmaker moves up and moves on.
The old car stays behind, loved, scarce, and slowly rotting.
And that is exactly the kind of gap a factory with hundreds of dies
and a long view is built to fill.
The third answer is that Detroit has actually been part of filling
that gap, just quietly, and in a way that fits how it works.
Instead of building old bodies itself,
it licensed other companies to do it.
Ford licensed the Mustang convertible shell.
GM licensed the Camaro.
That approach earns a fee.
protects the name and keeps the big factories focused on new cars.
It made sense for 20 years.
What it did not do was make new bodies cheap,
or plentiful, or available for every car people wanted.
And wherever there is a gap between
what people want and what is available,
someone eventually shows up to fill it.
The fourth answer is the customer.
The people buying these bodies are not trying to fool anyone.
Most of them are restorers,
builders and owners who want to save a car they love.
They already have the engine, the transmission,
the trim, sometimes the original paperwork.
They just need steel that is not falling apart.
For them, a new body is not a threat
to their classic, it is a lifeline.
And that is very hard to stop, because the demand is real,
and it comes from inside American car culture itself.
Now, this is the moment for the honest part.
Because a title like this one can easily be read the wrong way,
and you deserve the full picture.
First, these bodies are not perfect,
and the people who build with them know it.
Online there has been plenty of discussion about poor panel fit
on some of the early Juncheng Bronco bodies.
Doors that needed work.
Gaps that needed adjusting.
Builders who had to put in extra hours to make everything line up.
The quality has reportedly improved over time
and the Bronco is now the product the factory
has refined the most.
But a brand new body is still a starting point, not a finished car.
A good shop still has to do a lot
of skilled work before it becomes something you would want to drive
or pay $400,000 for. Second,
this is not some kind of takeover of the American classic car world.
200 Bronco bodies a year is a tiny number next
to the size of the American hobby.
The engines, the axles, the paint, the upholstery,
the wiring, the hours of assembly, most of the
value of a finished restomod is still created in American shops,
by American mechanics and
fabricators. A new body from Bowiing does
not replace the American restoration industry.
In many cases, it feeds it.
Third, a lot of people win from this.
The owner of a rotten Bronco that was heading
for the crusher now has a way to save it.
The small shop that builds Restomods now has
a reliable supply of straight steel.
The buyer who could never afford
a perfect original now has a path to a car that looks
and drives like the one he dreamed about.
Every rusted out classic that gets a second life instead
of being cut up for parts is, in a real sense,
one more classic on the road. So the story is
not heroes and villains. It is a market doing what markets always do,
finding a gap and filling it.
But that does not mean nobody pays a price.
And to see who does.
You have to ask the question that matters most to anyone
who owns an original classic car today.
What happens to the value of the originals?
Start with the market these bodies are arriving into.
The classic car market has already cooled.
Hagerty's measure of how hot the collector
car market is running sits near its lowest level in almost 15 years.
Buyers are pickier.
Sellers are waiting longer.
And now, on top of softer demand, the supply side is changing too.
Because a new body does not only save a car, it can create one.
A rotten shell that would have been scrapped becomes a complete,
straight, freshly painted Bronco or Mustang.
Multiply that by hundreds of bodies a year,
plus the American-licensed shells,
plus the replica builders, and the number of good-looking classic
cars on the road goes up instead of down.
For most of the history of this hobby, the basic rule was simple.
They are not making any more of them.
Every year a few more cars crashed,
a few more rusted away, a few more were parted out.
Supply could only shrink.
That shrinking supply was one of the pillars holding up prices.
And now, for certain cars, that rule is no longer true.
For the first generation Bronco,
for the early Mustang, for the Camaro and the
Chevelle with their licensed shells,
somebody is making more of them, not originals.
But cars that look like originals, drive like originals, and park
at the same car shows as the originals, that splits the market in two.
On one side, the true original, the car with its factory body,
its matching numbers, its documented history,
the steel that left the plant in 1968 and never left the car.
Every year, those become rarer, because the cars
that get saved now increasingly get saved on new bodies.
For a true survivor with a real history.
That rarity can mean more value, not less.
The story becomes the asset.
The paperwork becomes the asset.
The original steel becomes the asset.
On the other side, everything else.
The restored car, the restomod,
the tribute, the car that looks perfect,
but has been rebuilt so many times
that very little of the original is left.
In that part of the market, a brand new body changes the comparison.
If a buyer can build a straight,
rust-free Bronco on a new shell for a known price,
Why would he pay a big premium for a car
that is basically the same thing, just with a tired
original body underneath fresh paint?
The ceiling on those cars gets lower,
because there is now a clear way to build one from
scratch.
In other words, the value of a classic
car moves away from how it looks, and toward what
it is.
Two Broncos can sit side by side,
same color, same wheels, same engine sound.
One left the factory in Michigan with that body.
One is wearing a shell stamped in Baoying.
From 10 feet away, nobody can tell.
In the auction catalog, and in the price,
the difference can be enormous.
And that creates a risk that has nothing to do with who made the body,
and everything to do with who is selling the car.
A car built on a brand new shell is a perfectly honest thing to own,
as long as everybody knows what it is.
The problem starts when it is described as something it is not.
When a new body is quietly wearing an old identity,
and the next owner, or the one after that,
believes he bought a survivor.
The more new bodies there are,
the more the history and the paperwork of a car matter,
and the more it pays to be the seller who has nothing to hide.
So who actually loses in all of this?
First, the owners of restored cars in the middle of
the market, the person who spent years
and a small fortune rebuilding a rusty Bronco
or Mustang the old way,
cutting out rot and welding in patch panels, hour after hour.
All of that work is real, and all of that money is spent.
But the car now competes with cars built on fresh shells,
often for less money and in less time.
The labor that once made a restored
car special can now be partly replaced by one delivery from
a stamping plant. Second,
the people who paid a premium for a car mainly because it looked rare.
A beautiful early Bronco, bought at the top of the market,
with an original body that was more patch panel than factory steel.
When a new body is available for the price of a good used pickup,
the rarity that justified that premium starts to look a lot thinner.
Third, the American companies that built the licensed bodies.
For 20 years, they had a narrow and specialized market.
They paid for licenses.
They built tooling.
They followed the rules of the companies whose designs they reproduced.
Now they face a competitor that pays no license,
works at the scale of a factory that stamps
panels for modern cars every day,
and sells the same kind of product at roughly the same
price they charged more than a decade ago.
That is a hard position to be in, no matter how good your product is.
Fourth, and
And in a quieter way, the car makers themselves.
Ford still sells a Bronco and a Mustang.
The shapes of those first-generation cars are part
of the story Ford tells to sell the new ones.
Every unlicensed body is a small piece of that
story that Ford no longer controls.
And as the list grows, to the 911, to the Gullwing,
it will not only be Detroit asking that question,
it will be Stuttgart too. And finally, maybe the
biggest loss is something you cannot put a number on.
The idea that a classic car is a finite thing.
That every surviving example is a piece
of history that cannot be replaced.
For a lot of people in this hobby,
that idea is the whole reason they love these cars.
Once you can order a new body for a 1967 Mustang from a catalog,
the old car does not stop being special.
But it stops being irreplaceable.
And that is a very different feeling.
So let us go back to where we started.
Las Vegas. The first week of November.
A trade show built to celebrate the people
who keep American car culture alive.
And in the central hall, booth 24-5-9-5,
a factory from Bao Eng, three hours north of Shanghai,
showing brand new steel bodies for the Bronco, the Land Cruiser,
the Defender, the 240Z, the AE86, and the 67 Mustang.
More than 600 Bronco bodies already built,
most of them sent to America.
One of them inside a restomod that reportedly sold for $400,000.
Next to that booth, invisible but just as real.
The rest of the picture.
American companies that have been stamping licensed classic bodies
for 20 years with Detroit's blessing.
A federal law that lets small builders sell up
to 325 new replica classics a year.
And on the 19th of November, in Los Angeles,
a company from Beijing arriving with brand new cars shaped like
the 50s looking for American partners to build them here.
Detroit did not lose these cars.
Detroit walked away from them.
A long time ago,
and moved on to the future.
The cars it left behind never stopped being loved.
They just waited for someone to make them again.
And now someone is.
The question that matters is not where the steel comes from,
it is what a classic car will mean once you can build a brand new one.
If this helped you understand what
is really changing in the classic car world,
hit like, subscribe to the channel,
and tell us in the comments whether a classic on a brand new body
is still a classic to you.