Tub Drain Connection Without Access From Below

Repair house
9 followers
2 Video Views·Nov 18, 2026
AI Generated·May contain errors
Okay, so we're going to extend our pipe out for our trap
because we didn't know exactly
where this needed to be for that tub,
and it was easier after the tub was installed
to do this.
But basically, all I'm doing is just,
this is going to be my extension pipe.
I've got a 45-degree street elbow.
This street elbow will allow me to just put
the trap directly onto that street elbow and
connect to the tub.
Now, my depth of where my pipe was,
Required me to go with a spigoted adapter.
This is an inch and a half adapter, PVC,
and as you can see it has the regular threaded
on cap.
But what's nice about this is it's going to give me
the lowest amount of room for connecting
to the trap.
So this is just going to go straight into the hub of my P-trap.
This guy, on this particular drain assembly,
has a threaded in riser pipe, so what I advise
on this is just to get a little bit
of silicone on this before you thread it in.
This is kind of a common leak point,
these threads going into a riser pipe.
A little uncommon being ABS,
but that's just what this drain assembly is.
Purple primer, OD, and then obviously the PVC cement.
So you want to prime the fitting.
for the pipe and the fitting
and you can pretty much immediately afterwards you don't have to
wait for anything to dry you can just immediately
apply the glue so i do that on the pipe and also
the fitting and you want to just hold
that for about 20 seconds our fitting that goes into the
tee that we have
and then we'll
glue let's glue
that as well this
does give you
a little bit of
adjustment so i can i can pull back
this so you can see how much adjustment i have there so that
So that'll help me out.
To be able to get this glued in,
just hold that for about 20
seconds so it doesn't move.
Thread down, you're still moving.
