Today I'm making a cold process soap inspired by a creamy matcha latte!
For this design, I'm using a creamy base with colloidal oatmeal and shades of matcha green to create a soft, flowing drop swirl that resembles matcha swirling into milk.
The soap is scented with Matcha fragrance oil from VineVida, inspired by Le Labo's Thé Matcha 26 fragrance.
This soap contains colloidal oatmeal and matcha-inspired fragrance, but no actual matcha powder.
I hope you enjoy this one as much as I enjoyed making it.
Distilled Water: 502.57g Sodium Hydroxide (NaOH): 335.05g Fragrance: VineVida Matcha 26 Colorants: Mad Micas: Lettuce Entertain You, Smidge of Green Oxide, Addative: colloidal oatmeal, 1tsp sodium lactate into lye water
Please note: Always run any soap recipe through a trusted lye calculator before making it. Follow appropriate safety precautions when working with sodium hydroxide.
AI Generated·May contain errors
Hello my fellow soapers and non-soapers.
Today we are making a matcha latte soap
and I want to show you.
I have all of my ingredients measured out already. The actual
recipe will be in the description.
And here's my oils and butters. Here's my lye, water.
I've already dispersed some mica
in oil here just to get it nice and smooth.
And today we are using a scent by Vine Vida
that is another Le Labo dupe,
and it is called the Matcha 26.
It's a lovely scent, earthy.
It has a bit of masculine or masculinity to it,
but I would call it a unisex scent.
I have that pre-measured out.
It's only a 3% max usage rate.
No vanillin, no phthalates, no sulfates.
None of that bad stuff.
For one of my colors I'm going to be mixing colloidal oats.
So let's get
going. Of course first I pour my lye in and these
are nice to use because it's just disposable.
I know that's extra waste
but so be it.
I get this all dissolved.
Make sure you get anything
on the bottom.
If you feel
any roughness
keep going.
That feels good.
I pour about
a tablespoon
I'm going to put a tablespoon of sodium lactate in, you can use salt.
Dissolved in your water before you pour your lye also.
Either one. Sodium lactate is just a salt derivative. Natural.
I don't measure that. I just eyeball it.
Mixed in
a little.
And then I am doing the heat transfer pour
over method, however you want to call it.
It is getting quite chilly in the Hudson Valley.
Lots of leaves falling already.
And I love the fall. Absolutely love it.
And...
Now this will dissolve our butters and oils together
and I will speed this up so you do not
have to watch this for 10 minutes.
It takes about 10 minutes or so. Scrape down the sides.
Yeah about 10 minutes
or so and I will be back.
Everything is melted and I'm checking my
temperature. It's about 109.
I tend to soap on the hotter side but what the heat transfer does is
It brings down that temperature.
by melting your hard butters so it's not going
to be super hot you can let this mixture just sit
for a little while if you want it to be cooler
but i'm not doing too intricate of a design today so
i don't need to wait and i'm impatient
so i pretty much never wait so now i'm just going to blend to
emulsion mix
my blender try
and get the bubbles
out splitting
off about 40 percent
of my batter in here
And this is going to be our base with our oatmeal.
Putting that in now, and then I'll put in.
Now I only wanted
the oatmeal
in one half of my bar,
so I did not add it to the full batch.
You can add it to the full batch into your melted oils
before you even add your lye, if you'd like.
Result,
going
to
reserve
just
a
little
bit
because I'm going to be doing a somewhat of a drop swirl.
Not a whole lot.
And I'll show you, and I like using these cups
because you
can get closer
to the mold
and add fragrance to that.
It doesn't need it.
So I'm putting about 60% of my fragrance in there.
Again, I eyeball that.
You don't have to eyeball it.
You can measure out your percentages
for your batter portions on your scale.
And I've never used this fragrance before,
so we'll see how it behaves.
So far, so good.
It does not have vanillin,
so I shouldn't have
to worry about that.
I do think I'm gonna stick blend
this just a little bit more.
Do you notice my pink gloves today?
I got the colors of the rainbow.
I
pour
it
over
my
spatula
just
so I don't
introduce
any new
bubbles,
spits.
The more you get out,
the less you have
to clean up, okay?
This is going to be our green batter.
I already have this mixed up in here.
See if I wanted
to add any more.
I'm loving the color,
a little bit of this.
Let me get the rest of that color out.
I think I
would like
a little bit more.
This is Lettuce Entertain You from Mad Micah's
and just a minuscule, minuscule,
an eighth
a teaspoon amount
of green oxide.
Add our fragrance.
Mixed
up.
Just blend
this just
a little bit.
Get that fragrance oil
and the color nice and incorporated.
Don't wanna mix it too much.
It's
good.
Now I'm gonna pour this in
my cup for drop swirling.
Now the higher up you hold your cup,
the farther down your swirl will go,
and the closer the less far down will go.
So I'm going to hold it medium for the first two swipes,
or all of them, because it's thickening up pretty well
in there. Now I'm going to pour my white over
it. Hopefully we got a little
bit of, actually going
to do a little bit higher out
of here.
There we go. That's good.
Now we're going to let that set up just a little bit.
Because I want the entire top area to be green.
I will be right back.
Okay, this is ready to be poured in.
I will pour it on top
of my spatula.
It's okay if it makes some divots because honestly,
you want that look as though it
is a matcha latte.
Just
use my
spatula
to guide
it.
Found out
today
that they
no longer
sell this
soap mold
on Amazon.
I got it on Amazon years ago.
I can't find any other soap mold
that is this size bar.
That is it. I can't find any soap mold that is a four inch bar by three
and a half inches high.
So if anybody knows one please let me know
because I'm going to need to treat this as my precious
box here. That is it. So I will come back when we cut it
and I'll have some nice angles of this cut.
I do cover this with glass which I need to clean off.
And once it loses some more of its glossiness,
I'll spray it with alcohol just to reduce some soda ash.
There is debate on whether that works or not.
You know, better safe than sorry, I guess.
I'll be back.
I've covered that with glass.
Now I'm going to insulate.
I do like full gel on my soaps.
I like to get it a little bit off
of my counter, cover it.
And I just use
an Amazon box to insulate.
Nothing fancy. Nothing fancy here. Amazon box.
All right now we'll be back to cut it. Okay we're
back. Let's get this unmolded.
I did wait a little longer than I
normally do to unmold this just
because life. Let's go ahead.
That's how we did.
It's looking nice. It does.
I wish we had smell-o-vision.
It smells so good.
I'm filming on a different angle for this cuts.
Someone suggested that.
They wanted to see more of the cut.
So far it's looking pretty.
There's like a little
color morph going
on in there. Interesting.
Interesting
the color morph.
I wonder if it will
continue to change
color as time goes on.
It does
not have vanillin,
so look really pretty.
Probably would add more
and darker green because this got
quite light during saponification,
but it's still
very pretty.
Do not have
a multi-bar
cutter.
I just haven't wanted to invest in that.
I'm a small time maker.
I like to do just experiments, artisan bars, one-offs.
I don't make a lot of each scent,
basically one loaf of one idea.
Once in a blue moon, I will go back
and remake certain soaps
that people really love pretty.
So that fragrance oil did some
of this discoloration.
I'm assuming why it's some yellow.
Some green, went
from a pretty dark green
to a very light,
still very
pretty, and it
smells divine.
All right, next we're going to stamp.
This is the stamp I'm using.
Had it forever, even though I make stamps now
on Etsy for people.
I've just had this one forever,
haven't needed to make it yet.
Spray it with alcohol,
not the drinking cup.
It doesn't stick.
Every two or three, I'll just go over it
with a little bit
of alcohol.
I'm gonna photograph these.
A few days from now,
see what this color wants to do.
Now that it's cut,
it may turn all green
or it may turn all yellow.
I hope it doesn't turn all yellow
because then that's not matcha.
I have ideas to try
this one again,
but how people enjoy the actual soap,
which is the most important part.
The alcohol evaporates,
so it might look wet,
but the alcohol will evaporate.
Sometimes I use
Thin plastic, the alcohol
keeps the stamp also clean.
I always stamp right after
because if you
wait even a day or so with my particular recipe,
it's too hard to stamp and I don't want to use
a mallet or hammer because I just don't want to.
So your recipes may be different.
Yours may stay softer for longer.
It's really your hard butters
to liquid oil ratio.
That will determine that and if you use sodium
lactate or salt also change how quickly your
bars get real hard
and how quickly you can unmold.
That's the last one. I think they're
really cute. The green here is not exactly what I
was hoping for and I should have done the drop
swirls a little bit earlier before this batter set up.
A little too much for these drop swirls
Not to go down a little.
But it's cute.
All right I'll show you how they look I want
to say three days from now,
four days from now. We'll be back.
And I think they came out great. This is a few days later
and the color did darken a little bit.
I also think my lighting may contribute a little bit
to that but I'm very happy with how it turned out.
Thanks again for watching.