The Reality of Building Houses in Winter - Ep 4

Dave Does Carpentry
1 follower
1 Video View·Nov 17, 2026
We're Framing a new double story house in Melbourne Australia, and im going to film the entire job and showcase everything that goes into building a house in Australia. In this video we install the trusses and build the Alfresco
Thankyou to Hikoki for sponsoring this video and sending me out the C3609DUM 36V saw!
These videos are for inspiration and entertainment only. Building methods, codes, and safety standards vary, and errors or omissions may occur. If you choose to follow anything shown, you do so at your own risk. Dave Does Carpentry accepts no responsibility for injury, loss, or damage resulting from the use of this content. Always use proper safety gear and follow local regulations.
We've been working on this frame for just over a week
and a bit now, and we're now up to the
crazy part of the job. In the last video I did on this framing series,
we finished doing all the
wall frames upstairs. They're all tied off,
and now we're going to jump back downstairs, and there's
a ton of little projects we're going to jump on,
and I'm going to be starting at the back and
working on these posts for the alfresco area.
And with that, I've got a brand new saw from
Hikoki that I'm using for these,
and I'm just going to say thank you to Hikoki for sending
the saw out for me for this job and sponsoring this video.
Before I get killed for this,
we are using cup heads right now just to hold that in place.
Obviously, you can't use a cup head going into metal like that.
We are going to be changing these when we get the right boss.
To make our lives as easy as possible,
I do want to measure the heights of the posts,
cut them to height, and then also do the checkouts
while they're on the ground.
I went through with a laser first thing this morning,
just working out the exact heights
we need to cut them at, and if you've ever had to cut a post before,
especially when you're
working off a ladder and it's overhead,
you know how much of an awkward job that is. Trying to get
that saw up above your head while you're awkwardly on a ladder,
and then even worse, the cypress
posts produce so much sawdust it just gets everywhere.
So doing these cuts in the ground,
It does make our life so much easier.
Mate, this saw is such a beast to use.
I've never had a quarter saw anywhere close to as big as this thing.
And I was actually a little bit worried
if it'd be a bit hard to control.
But no, it powers through that cypress as we saw
as we're going through ripping those posts.
And the best thing is, you've got
multiple places to actually grip onto it.
So depending on how you're cutting and how you're using the saw,
you've got complete control over it.
You've got precision in the cut.
And this thing is just deadly to have in the toolbox.
This is the one we're talking about.
Alright, so the beams are up for the alfresco, ready for trusses.
We do have to go through, do a few straps,
obviously, bolt through the beams at the top.
I'm going to leave that for now, though.
We've got a bit of a weird detail going on,
and we've actually got these two beams in
the middle, which are floating right now.
They don't actually go into the wall frame,
and then on that side, they don't actually
go into that post at all.
Those are just tent blocks holding them up.
But what we need is a block wall the entire way up in the middle
and those two bits of timber you see they're actually going to be
wireless getting bolted into that block wall.
Obviously blocks aren't there yet,
but we need to go through get the roof done.
So we've propped everything up for now
We're gonna obviously have to change how the props
are so they can get in there and build that block wall
But we've only got those done like that to get the trusses in.
But yeah at the end when everything's done
They're gonna have some big diner bolts going
into the blocks and it's all gonna be secured.
And we've got all of our lower trusses here ready to go.
I don't think we'll get any of those installed today,
but I do want to go through and mark every single one out
so that when we do chuck them up, it can be nice and quick.
And for the lower section, it's very straightforward.
Starting from the front here, and we're just doing 900 centers,
going all the way through to the back.
So we're going to start with the trusses at the back here.
I marked them out yesterday
but we've had a quick change of plans and we're actually
going to put in a skylight right in the middle.
I'm going to remark these out to make sure we've
got a 900 centre right in the middle
so there's as much room as possible for that skylight which
will be the same for this unit and also that unit behind me
and I think it's been pretty cool when
it's done. We're going to do timber lining boards
on the bottom of this alfresco. We're going to
wrap up into the skylight very similar to a job I've done
a couple years ago which I did a video
It would be awesome to do this here as well.
As far to me as I can go.
Let's get out
of the ride.
So far the weather's been pretty bad to us in this job
and it just looks like it's going to
get worse and worse. Today is meant to be one
of the worst days we've had. It's going to be
non-stop rain just drizzling down on us,
it's super windy as well and at this point I'm just
over the weather. When we actually started
this job off about two weeks ago it was a complete
opposite and it looks like a different job as well looking
at this drone footage seeing how clean the
work site is and especially seeing how there's
no mud on the concrete slab. Fast forwarding a few
In a few weeks to today.
We've just got mud trailed throughout the house.
It's just been raining non-stop.
We had a few horrible days as we're upstairs trying
to do the flooring and flick out
and since then it's just been often on rain.
At least today it's not too bad if we get rained on.
We're just working on these trusses
and I'm just using one tool, just my nail gun.
So I don't mind too much if that gets a bit of water on it
but if it was a day where we had
all the tools out and it's getting soaked I
reckon we'd almost pack it up and call it a day.
With those lower trusses done we're going to jump
on the front balconies. I actually started going
through the other day when we're doing the alfresco beams.
I've done most of the joists then
so we're just going to put the last few
in and then just jump upstairs and start flooring it.
There's a few really cool details
which are happening on and around this balcony
and I'm keen to make a full video just going through all
the curves and special features
we've got at this front facade.
It's going to be a cool looking job when it's done and it's
going to be one of the most exciting parts
of this house frame which I'm going to dedicate
the entire next episode too.
The balconies are done, those walls are up, and I don't think I filmed
the guys doing it, but this subfloor is done.
This is where we had that big hole
when we were doing the posies and laying the floor out.
They've gone through, they've done 140 rafters everywhere,
which has given us more ceiling space in the pantry below.
But with this done, it means we can do our external wall,
we've got a hallway wall through here, and I think a few nib wheels.
So while we're up here, we might just get set up and get all those in.
Soaked, man.
Working in the rain is one thing,
trying to film in the rain is a whole another thing.
Can you just bite me into that wall?
I just want to find out, I just want to find out the opening
of the stair void and then we'll find
the center of the stair void for our skylight.
4,750. What's half of 4,750? I want to say 2,375.
I'm not shooting.
Oh, I'm not confident. I'm yeah, 2,375, I think.
3-3-7-5, you've got it on.
Beautiful.
If I was wrong, I would have cut that bit out.
Two, three, seven, five.
Yeah.
It's a good thing.
All right, so that is center.
So both of these units have four skylights each
and the reason I'm working out the center of the
stair void is we're gonna have two skylights
which is going directly above the stair void
and we want them to be evenly spaced.
So by the time this job is done you're gonna be walking
downstairs and you're gonna have that void looking straight up
into the skylights and it should look
pretty cool when it's done. And whenever we do trusses
and they've got skylights or anything
important like that we'll always go through work out exactly where
the skylights go make sure
they're right to the plan and then from there we
can go around and just mark out the rest of the
Alright so we were waiting to do the upper
trusses until the two plank got installed
because with the two plank up it's going to make life
so much easier. We can walk around
easily move the trusses
but we are at the point now where we've done everything we can
and we just need to get up here and start doing the trusses.
We've actually installed all the
lower trusses but we're waiting for a timber
delivery so we can actually finish off the
parapets and do the box gutters.
Because we don't have that timber yet we don't really have anything
else to do. So we're jumping at the top starting
with the smaller trusses towards the back
And our goal is just to get as many done as possible
while we're going through and installing the two plank.
So we're going back to this other one now.
Yep.
Even if we did have the two plank up,
I reckon these trusses would have been a bit awkward to do anyway.
Just because there's so many internal walls down the back
and there's bracing in every room,
it's just hard to move the trusses around.
So at least at this point we could get one person
up on the party wall to easily slide them through
to me, and it was just a bit of a
pain as I had to keep moving my ladder
into every single room to shoot these ones off.
But at least these will be the last few trusses we got
to do until the two planks are completely done
and then we can jump up
and we've just got a clean run to get it all done.
Yeah, with me, yeah.
Oh, those nogs are in the way now.
Yep,
yep.
You can see how quick
the trusses do go up
with the two-flang.
It's been a long time since I've done a job with it,
and it's good fun just smashing the trusses out, getting them done.
Now we're jumping onto the skylights.
We're just going to chuck a few beams in,
and all we need to do for the skylights at the framing stage
is chuck those beams in, which go in between a few trusses.
They're the trusses that we marked out earlier,
making sure they're in the exact right place.
And then we've got our filling trusses,
and they're going to go butting into those beams for the skylight.
Um, so we've got some longer ones on one side
and then on the other side we've got some tiny little trusses
just to finish up roofline on the other side of the skylight.
If you go
in between
this gap here, I'll
be able to slide.
Oh, you might need to go your side first, sorry.
And when you shoot yours off onto the wall, just
pull them back and forth until they're flush.
Yeah.
Because this beam might have some movement.
Yeah.
Thanks.
All right, so there we go.
All the trusses are up for the upper section.
They've gone through.
Actually, everything's already been screwed off
and they're just finishing the joist hangers there,
which is pretty good.
Speed race is done at the top.
We've done some noggs at the top.
I'm gonna jump on and start doing the speed race
at the bottom here.
And at the same time,
some of the others are gonna go through
and just do a row of noggs in the middle,
which
will
hold
everything
solid.
So we're all done for the day.
We're not completely done with the speed race.
We actually didn't get a lot done at the front of the unit.
But yeah, we went through, as you can see.
We framed up for our skylights.
I think this unit has five on the plan
and this unit has three.
But the way the trusses are spaced,
I think I might try to put five in this unit.
I think what's going to happen is over these stair voids,
we're going to have two skylights.
One there, one there.
And that's just going to be open the whole way
when the house is done.
And it's going to look pretty cool.
Then we've got one in here,
which is over the walking robe.
And then we've got some in the bathrooms as well.
So they're all done.
And by the time we come back next week,
we're just going to be up here doing the paraphrase boxes,
completely finishing off the roof.
Alright so I'm just jumping up now
and I'm going through doing the parapets up here and
doing the box gutters as well.
Parapets were pretty straight forward
because we've got the uprights as part of the trusses
and for the box gutters we're just going through,
I'm flicking a line with a chalk line and
all we do is 10mm full every metre,
do a few trimmers going across the trusses to that
chalk line and then we're just chucking some
valley board on top so it's pretty straight
forward.
For this parapet that we did build though,
for this video I've only gone through and attached a
top plate to all the studs that were already there,
but we actually came through later and
we added a new stud in between every single truss,
and that was a request from the rofer
because apparently he's done a few jobs where
you've had tall parapets like this going into
a box gutter, and what can happen is when there's a lot of wind,
the flashing for the box gutter
starts to bounce around and cause a lot of noise.
So we've actually gone through,
Throw added more studs in between every single truss.
And the roof is just going to go through and silica the box gutter
to that just to make the flashing a bit more secure.
Alright so we've got those roofs done pretty quickly
and with them done I'm actually jumping
to the front balconies and I'm going
to start prepping some walls up for some front feature
curves. Here's a little glimpse of what it's all going to look like
when it's done but we've got
a horizontal and a vertical curve intersecting
with each other at different radiuses as well
so it's unlike anything I've built before it's going
to be one of the coolest things I've framed
and there's a lot of work that goes into it
so I'm just going to put the entire process
of building these two curves into the next
and final framing episode of the series.
