- If you want to see more, please give it a like or leave a comment down below. If you liked it please subscribe to my YT-Channel and to my Facebook Cad Page as well. For better a overview regarding my youtube videos - head over to my blog. -If you want to support my work, please watch my LinkedIn Learning Trainings, this really would help the channel. You can register for a free trial month with LinkedIn Learning. There are all kind of really great trainings available.
This tutorial demonstrates how to create a \"Turbo Snail\" model in Solid Edge 2020. Since the software lacks a dedicated 3D helix command, the author uses a workaround involving a swept protrusion and projection to create a spiral path, followed by advanced surfacing techniques to build the snail's complex geometry.
Hi, welcome to a Solid Edge 2020 video tutorial.
I want to do that Turbo Snail exercise in Solid Edge.
Kind of odd, there's still no real 3D helix command in Solid Edge.
But let's have fun with
Solid Edge anyway. So in order to get a spiral, I need a helix.
And in order to get a helix,
you have to do it like this or similar
Let's show our planes and let's do a sketch on the front plane.
First you need some sort
of axis like that, maybe 50
length, doesn't really matter. This should be
rotational axis and then I need a sort of profile
to get an edge which I will project into another sketch.
So we'll go for a triangle.
Let's see if we can have snap here, yes.
Triangle.
Let's give it some dimensions and some constraints.
Let's put this point above the midpoint.
There's a dimension of maybe six here to that point.
Maybe one last dimension,
this one to that point.
And this should be 107.5.
And of course,
this should be aligned in that point here.
Put this on this constraint, that one.
Close that sketch.
Let's give it a start point,
maybe here of course.
Pitch should be 46 and I want to go for pitch in turns.
And the turn should be 7 divided by 8.
Go for preview and finish cancel this out.
And now I can project
that edge here into sketch,
which will give me that spiral which I need.
So for another sketch on the top plane
and let's project that edge here.
And that's it.
So close that sketch, finish, cancel this out,
and let's hide that protrusion now.
So that's my spiral here.
I will need later on a plane, but right now
I can go for a sketch on the front plane.
The circle, which is right there,
and the dimension might
be 20 diameter.
Close that sketch.
Finish, cancel this out and now I want to go for it.
Sweep, swept, surfacing, go for swept.
Right now I cannot scale, but I can scale later on.
So first should be the path, the form,
the next step, and this will be the profile,
preview, and I should be able to switch
and scale. I want to scale along path by two,
and I want to use an axis step,
which controls the direction of the profile.
Let's go for finish.
Cancel this out.
Now I need two planes because I want to split that surface.
So go for home, go for parallel plane,
get this one in that direction, six millimeter,
another one, again parallel,
this plane in that direction,
again 6 millimeters, confirm.
And now I can split
that surface two times with those planes.
Surfacing split,
I want to split this surface here, upper plane,
Confirm. Finish. For half our plane.
Cancel this out.
This surface. So go for home.
Faces and select that stripe here.
And confirm. Finish. Cancel this out.
Next I need a sketch on this plane here.
So go for sketch there.
And I want to use those two sketches.
So let's hide them. I'm going to use a line
which starts at this.
So it goes to that one.
Close this sketch,
finish cancels out, and I need
a plane with a 25 degrees angle
to this one or that one, so go
for plane, flip this one and that one,
so we'll turn around the intersection
of those two planes, and this will be,
see if we can go lower, yes, this would
be more like it, go for 45 degrees,
sketch from this plane,
from this vertex to this vertex,
close that sketch. finish. cancel this out. and now
i can go for blue surf surface. surfacing. go for
blue surf. select cross
section. this one. the other
one. confirm. now go
for the next step.
should be this guide. confirm.
lower edge. that one. confirm.
finish. cancel this out. great.
Let's hide.
Those planes which are done.
Subtling.
Blue surf surface between this edge and that edge.
Superfull blue surf,
select, confirm, select
the one, tangent continues,
you can control
here
the magnitude,
this a little
bit, so whatever
way you do, back,
get in the way of
the other blue surf which I want to do over there.
So, go for next, finish, cancel this out.
Now I want to split that surface and therefore I need another plane.
So go for another angled one,
this one and that one as reference,
and that angle should be 35 less,
so I want to go for 140 maybe
at the moment, should allow me
to split that surface, I could
even trim this one, that plane,
confirm, remove this side,
confirm, finish, cancel this out.
Now I want to do blue surf.
Those edges here.
This should be tangent continuous, yeah,
and I want to have guides.
One guide would be this edge,
another one would be that edge,
finish,
cancel this out.
Didn't take the second guide, so go back,
edit that one,
the guide,
that edge here.
It's more like it, and you
can even tangency here.
Okay, so it doesn't snap to this one,
or I'm mistaken, the second guide.
I think it's already
there. Yes, it is.
Does not add up.
Yeah, maybe
that's too strong here.
Back. Select this edge and that edge.
Possible. No, sorry,
you have to select them one by one.
That's the problem.
The first single one.
The first one. Add.
The second one. Doesn't work.
That's interesting.
Or maybe just the preview was wrong.
Interesting. So maybe I could
Adjust both of those tangencies here.
I should adjust this one.
I drag in this in that direction a little bit more.
Like that.
Finish.
And I could do the same with this blue surf surface.
Okay.
And if you change that angle here.
Eight.
Smaller.
Adjust this.
Let's hide that blue surf.
This
one.
Let's see.
I need the sketch on the top plane, I suppose.
sketch on the top plane,
need to bring in a second sketch,
so let's go sketch this one,
and I want to project this curve here
into my sketch, that's it,
this line for construction
only, add, let's hide
that looser, let's
sweep engine arc,
get there, and this
might go for example,
close that sketch, plane
which is that position here,
So go for a plane follow to curve.
This will be the curve and the end would be at zero.
Now a sketch right there
with a circle which sits
on that point coincident
and the dimension should
be maybe 60. We need to split
that one with a rectangle.
This will be a rectangle for
construction only.
Make these for
construction and
align the midpoint
into that point here.
It's already aligned, great.
Then another dimension, this might be 28 for example.
I want to split that arc here with my split command.
There you go.
I want to split this one with that intersection point
and this intersection point.
I've got it
and okay.
Close and leave that sketch.
Finish.
Cancel this out.
So in order to make this work you have to correct one blue surface.
Or make sure. Let's take a look at this one.
But maybe that one. No. This one here. You have to make sure
that on this end here you have tangency.
Take care. So it should be tangent to that
trimmed surface. To this one here.
So let's pick the other surfaces.
Let's sweep.
And this one, I suppose, yes.
This arc here...
This one, this edge. Go for tangent.
Go for normal to section.
This looks pretty good.
Cancel this out.
We hide that one.
This one should
be hidden as well.
We'll go
for another blue surf.
This edge here.
That arc here.
Go for one guide here. Another guide there.
Let's go for normal to section here.
Tangent continuity, next, finish,
cancel this out, bring back the blue surf,
and now I should be able to stitch
those surfaces together, or stitched, okay,
this surface, that surface, this one,
that one, this one, preview, finish,
cancel this out, and I'm done, so hope
I hope you liked it, if you did like it,
please give it a like and leave a comment.
If you want to see more, please give it a like
and leave a comment, please subscribe
to my YouTube channel, please subscribe
to my Facebook fanpage, it would be very nice
of you.
I want to get more likes and subscriptions over there as well.
Thanks for watching, see you to the next one, bye bye.