Please note I´ve made a wrong "section-sketch" in some of the muffler v3 videos (the ones with sketches as guides) - the righthand side sketch has to be on an angled plane and you need a different intersection curve to make it tangent to. Sorry, just noticed it while I was doing the autocad version.
Quite a lot of work if you want to get something similar in programs without that filet/round command with hold/limit curve - enjoy! You can find my Onshape models by searching for "wwc". The pdf is available on my grabcad account. - If you want to see more, please give it a like or leave a comment down below. If you liked it please subscribe to my YT-Channel and to my Facebook Cad Page as well. For better a overview regarding my youtube videos - head over to my blog. -If you want to support my work, please watch my LinkedIn Learning Trainings, this really would help the channel. You can register for a free trial month with LinkedIn Learning. There are all kind of really great trainings available.
This tutorial demonstrates how to model a silencer muffler in Onshape. Since the software lacks specific face or shape fillet tools with hold lines, the instructor utilizes a combination of surface lofts, 3D fit splines, and fill surfaces to achieve the complex organic geometry required for the part.
Hi, welcome to an Onshape video tutorial.
I want to do that silencer muffler exercise in Onshape.
As there is no face fillet or shape fillet with a hold line,
I had to come up with a different
method. And so I went for lofts
and fill surfaces.
Now let's have fun with Onshape.
Okay, let's start
Let's start with a sketch on the top plane.
That would be a centered rectangle, like this.
Should be 400 by 300.
The line,
because I want
to trim here,
add two more dimensions
from this point to that line.
It should be 180.
From this point to that line, it should be 280.
Let's add some fillets.
90,
another
one here.
90, 20,
another
one,
again, 90.
And the last one over there.
Again, 90 millimeters.
I will need another line here, construction line.
Make it perpendicular.
Those two
should be
perpendicular.
Here, make that point
the midpoint of that line.
Make it again the midpoint of that line as well.
Okay, confirm.
Another sketch
on the right plane.
That will be a
circle, the 600.
And the distance from this point to the center point.
should be 210 let's add
another construction
line I need to trim
that dimension here maybe 20.
let's trim add sketch
a sketch on the
right plane and I
need to bring in like
this go for a line
that angle should
be length should
be 40 and here this
one be 88 so I have
two degree draft
Let's
do a sweep,
it should be a
surface sweep,
with that line,
this, confirm.
Let's go for extrude,
surface with this one,
should be symmetric,
maybe 450, confirm.
Now in order to get circular sections,
I have to do section sketches.
Let's start with a sketch
on that plane.
Let's bring in construction,
intersection, this surface, that surface,
This surface,
then add
a tangent arc here,
there,
and of course,
this should
be standard,
that should be standard as well.
Close that sketch,
go for another sketch,
now on this plane,
again bring in intersection
and
construction,
this surface,
and that
surface, and
this surface,
arc tangent of course,
this should
Standard.
It should be this one.
Arc here should be,
to get a more
precise surface,
I will add one
more plane sketch.
So this sketch, that's the one, make it visible.
I need a plane right here.
So go for a plane,
go for 80 degrees
sketch here,
bring in the intersection of construction,
this surface and that surface.
Add that tangent arc.
This should be standard,
this should be,
you can see here as well,
is it a right tangent?
No, it is. You can see.
Now let's hide this surface, and I
want to get some sort of upper
boundary, therefore those arcs.
Let's go for a 3D fit spline,
which goes through those endpoints.
Close that
spline like
this, that's okay.
So if you want
to get
a more precise
Carve here you have
to do more section sketches.
Another sketch maybe a plane.
See that sketch here
because I want
to bring
in that point.
So go for use
that point
here.
Plane yeah I'm
on a plane
that's the problem. So to go
for the right plane this one.
Bring in show that sketch and
now I should be able to bring in that point this one yeah.
I need a line, which
is a vertical line, and maybe
that point is the midpoint line.
Let's do a sweep.
Surface, that,
and this is the path
to keep profile orientation,
confirm, surface, tool,
and split it.
Go for a split, I want to split
this one with that tool,
confirm, and hide this side.
Now, I could maybe use those here, or I could go for three.
If it's splines, I will go for splines. It's easier to do.
But first I have to split the surface.
So split this one
and that one.
That plane here.
Hide all the sketches.
Then do another split.
This surface
and that surface.
This one and that one.
The plane. Now I could
do it here again.
Let's see if this works out.
If not, I will not use that plane, but I can go for one.
I want to split this surface
and that surface with this tool here.
Now let's hide
those planes, hide
that curve here
and do some 3D
fit splines.
So from this point to that point.
Start direction would be this edge
and direction would be that edge. Let's take a closer look
And I think I have to turn this around, yeah.
And of course you could change the magnitude
and make it more like a circle.
So this one didn't go well.
This should
be the direction.
Seems I didn't get that edge.
Stop it.
Try once more.
3D fit spline from this point to that.
Start direction would be this edge.
See,
just that.
Then go for the end direction.
That would be this edge here.
Here, this point,
point, start
direction would
be in this line,
here, this edge,
okay, here,
a 3D fit spline from this point
to that point, start direction,
this edge here, here, end
direction, that edge,
direction, from this
point to that point,
start direction, this
edge, that edge here,
confirm,
there should be one.
this point, that point,
start direction this edge here, around,
end direction that edge here, confirm.
And I might split that surface here
in the middle. We will see if I can go
with this, or if I have to
make smaller surfaces. Let's try, for example,
right here, use this edge here, surface, this one.
new surface, and use that edge, go here,
go there, this works, moment at least, let's
go for tangency as well,
and let's see if we can add those guides here,
so guides and continuity,
this guide, there as well,
great, we found this,
so you see,
this doesn't look too good,
so I will need another spline here,
the problem, delete this one,
and add planes in order to
So to split that surface.
So, let's go to edge number 2
and just add a construction line,
a vertical one, like this, confirm,
sketch, make it visible, a plane,
two planes with line angle,
this one go for 45 degrees, of course I
could split it right here as well,
maybe that's the better choice.
Let's delete this one.
And go for a plane.
In the curve point.
In that midpoint, select that edge.
Add another
one here.
Plane here
as well.
Plane
confirmed.
Now split this surface
with that tool here.
This surface with that tool.
Split once more this surface
with that tool here.
Hide all the planes.
And I should have split
this surfaces as well.
So split at that surface.
This surface.
Split seven that surface
Let's add some 3D fit splines,
from this point to that point,
out direction here, and direction
there.
Another one
over here, ok,
and the last
one, and the
last one,
direction
this edge
around.
Let's see if we can now do loft surfaces.
Ok, maybe start here,
it needs to be tangent
here and there,
and this could be, let's see,
Surface I want to go
with this edge, that edge here,
click here, this edge,
go for match tangent, this edge,
click here, right there,
this edge, new surface, this one,
you can see, doesn't work,
but we can add guides and see
if this will work, so that would
be one guide, second guide one,
this seems to work, and that one,
great, confirm, nice one.
Let's try this one over here as well.
So go for loft,
use surface,
this edge,
that edge,
this edge,
this one,
and this one.
Looks okay.
This should be 10 match tangent,
profile as well, works.
Now let's see if we can add the guides.
This would be one guide,
second guide is here,
and the last guide would be that one.
Great.
Confirm.
This surface here, in one move, maybe it works,
maybe it will not, we will see.
So, surface, this one,
that one, tangent,
this edge, new surface,
this edge, that edge,
this one, go for match tangent.
Great, let's see if we can add the guides,
and now the guide would be the edge of that surface here.
So go here, right click, select other,
and make it edge of loft one, okay?
Add this as guide as well,
then go here and add edge of loft two.
And let's see if we can add tangency here as well.
Great,
very nice.
And confirm, there's only one
surface left to do, this one.
Okay, so let's close that gap, at least try.
So go for another loft.
So surface, I want to go for this edge, add that edge.
It should
match tangent.
This edge here.
That edge, this edge,
that edge,
and go for a new surface,
this one, tangent, let's try
to add the guides, I need
that edge of loft two, works,
this edge of loft, now let's try
to add this one, yeah, let's see
if we can match tangency as well,
tangent, another match tangent
Works great!
I've got really nice surfaces here
and now I want to make a boolean operation and join them all together.
So go for boolean operation and select all those surfaces.
So let's add
let's
confirm
this.
really
nice
surface
here.
Maybe hide all those sketches.
So the rest should
be quite easy to do.
I need another plane
and that should have an offset from the plane.
It should go in that direction and it should be 230.
Let's draw
a sketch right there.
It should be a circle.
Diameter
should
be 56.
Only half of that circle, so I could trim it here already.
There's
a construction
line right
there.
Trim
with that sketch.
Let's make an extrude.
Make it a surface.
Make it go up
this.
Confirm.
Let's split this surface here,
just that face, with that one.
Okay, let's see if it worked, yes.
Hide this one.
Nope, it didn't, so you have to split the part, okay.
So, split the part, part,
split, keep the tools,
Yes, confirm.
I should be able to hide that surface,
yes, but split it here as well.
So let's make a boolean operation, okay.
another boolean, or with the same boolean,
this one, and that will be just an edge fillet,
hide that plane, fillet,
should work, yeah,
it goes over that edge, that's okay,
other plane,
if I need a sketch,
it'd be sketch
number one,
I suppose,
this one, yeah,
I need a plane point, so go for a plane,
this will be the point,
and that will be the curve
Confirm.
Let's do a sketch here.
Offset. Better.
So go for an offset.
30 millimeter.
This one. Yes. Confirm.
Let's do a sketch
on this plane to bring
in this point here.
A circle.
Again 56. Confirm.
And another one.
On the same plane.
Again bring in that
Point here
Another circle and that diameter would be one hundred and six
106
Let's make an extrude with
the big one, the surface,
and this should go all the other direction
do, and split that surface
part here, so go for a split,
this is the part,
that is the tool,
that surface here,
cause another boolean
over here, extrude
with the small one,
or could go for a half
circle in that sketch,
trim that one, trim, make
this for construction,
Now let's make an extrude
with 5mm, the other
direction, 5mm, now go
for loft on this edge
here,
surface loft
of course,
on this edge,
to see
if we can make
it tangent,
so let's
go for tangent here, yes,
and let's try the other one as well,
tangent, great, get those
those planes?
Make a boolean operation.
This surface, that surface, and this one.
hide all
sketches
if possible.
Let's mirror
this surface here.
Mirror,
confirm.
Now you can do another boolean operation.
That one, and done.
It was a very lengthy one, but I hope it was helpful.
Hope you enjoyed it anyway.
So if you liked it, please give it a like or leave a comment.
If you want to see more, please give it a like or leave a comment.
Please subscribe to my YouTube channel.
Please subscribe to my Facebook fan page.
It would be very nice of you.
I want to get more likes and subscriptions over there as well.
Thanks for watching.
See you to the next one.
Bye-bye.