Quite different approach, which you could use in the other programs as well - enjoy! You can download the start-step file here: https://grabcad.com/library/combustion-chamber-exercise-catia-v5-siemens-nx-12-1 - If you want to see more, please give it a like or leave a comment down below. If you liked it please subscribe to my YT-Channel and to my Facebook Cad Page as well. For better a overview regarding my youtube videos - head over to my blog. -If you want to support my work, please watch my LinkedIn Learning Trainings, this really would help the channel. You can register for a free trial month with LinkedIn Learning. There are all kind of really great trainings available.
This tutorial demonstrates how to model a combustion chamber in Onshape using surface modeling techniques. The instructor guides the viewer through importing STEP files, creating sketches from curves, and utilizing advanced surface tools like sweeps, lofts, and fills to create a complex, organic geometry with precise tangency.
Hi, welcome to an Onshape video tutorial,
now the combustion chamber exercise in Onshape.
I've already imported the start step file,
which you can download from my GrabCAD account.
In order to use those curves, I have to make sketches.
So let's go for a sketch,
right plane, and I want
to use curves here,
just select them,
That would be the first sketch.
Then I need a second sketch.
The same plane, that would be the right plane, yes.
And now I want to use those arcs here.
I'm in leaflet sketch, and the last sketch would be
the look that should be the,
looks like the top plane, yes.
And that would be this line
and that line, confirm.
I could hide
those curves like this,
and only my sketches are left.
So for the first chamber.
Extrude. I don't want to go for a sweep, I want to use an extrude.
Surface extrude. And that's the problem.
I cannot have a surface extrude with a taper angle.
So I have to go for a sweep.
Therefore I need another sketch on the top plane.
That would be a line. Maybe normal to this one.
A line. That. And of course
this should
be with that point.
So go for...
For instance, this,
Then go for dimension,
This could be maybe 30, should do.
Angle between plane here,
that would be the right plane,
so let's make it visible, between the right plane
and that line, and that angle should be 85 degrees.
Confirm the sketch, and maybe that plane.
And now I want to do a sweep, so go for a sweep,
surface sweep, that's the profile.
And that
would be
the part.
Confirm.
Now a symmetric extrude with this sketch here.
Again a surface.
And that would be the sketch here.
Make it symmetric.
It should
be 40.
This is the complete depth.
So it should be 80. Confirm.
Add a fillet.
There. 5 mm. Yes. Confirm.
Now let's split. Split.
I want to split this surface here with
That one and I want to keep the tools.
Confirm. And let's hide surface here.
Now another split.
Split this surface with that one.
Keep the tools. Confirm. Hide this one and
that would be surface four.
Let's use a boolean operation.
Make a union between those two
Surfaces.
Let's see if we can do that.
Fill it with variable radius.
Okay, let's go for the fillet,
switch to variable fillet, 1mm, select
that edge, it should go all around, yes,
and you have to make a radius, so I want
to use this point here, so go for vertex,
this one, should be 1mm, that one,
should be 1mm, here, select this one,
that one, just click there and recognized,
Another vertex.
There, this should be 10 mm,
that should be 10 mm,
same on the other side,
10, looks pretty
good, so let's confirm, and I've got
my first chamber, very easy to do.
So, for the second part,
let's see what I do,
could use that sweep
and boundary, use
sweep, so let's see what surfaces are still there.
This one here.
So let's do them again.
Let's hide that surface
and bring back the sketch.
Sketch. Let's go
for an extrude surface.
Let's go
for this sketch first.
Should be
symmetric.
Again should be 80 millimeters.
Now let's add the fillet on top here.
Millimeter, confirm.
Then make another extrude,
Again a surface with that sketch here, this one.
Twenty five is okay, yes,
and confirm.
Now let's make a split. I want to split this one.
I don't need to keep the tools,
so I could just go for that surface to split it with, confirm.
Then I could hide
5 like this.
Now I don't want to do a new sketch, therefore I will do
Let's sweep again,
go for a surface like
this.
Okay, confirm.
Then I want to move the boundary,
that should be here, yes.
Move the boundary, tangent propagation, yes.
Here, it's interesting
what happened there.
Yeah, I got the surface, I just wanted the edge here.
That's it, I've got the same angle, that's okay.
Confirm, I could hide,
somehow merged, okay.
Then I will split it.
So I go for a split.
I want to split this part here with the right plane,
because it will keep the tools confirmed.
And then I could hide the surface.
Now in order to get a loft between
this surface and that one,
I want to use some guides.
And for the guides I need to split
the surface a little bit.
So let's hide sketches
here like this.
And I will use
two planes and I could do the plane through
that edge that's really really dirty and
really really quick
so I would not advise to do it like this but it works in this case okay
therefore I will do it
that's really really dirty I go for a line angle
line angle, yeah line angle
and select that sort of edge
that's really very dirty
But, it works. Okay? Same here. You could do,
of course, just planes with an offset to one of the
origin planes. Anyway, I want to do it like this.
The line angle is again 90 degrees. And now,
I want to split this surface here with those two planes
I go for a split, I want to split this one
First with that plane, confirm, and then I want to split this side.
that plane here and confirm. then I
could hide those planes. and now I want
to do 3D splines from
this point here to that point. from this one to that one
and on the other side as well.
and now I have edges and I can use that edges
for the direction of those splines. so let's go for
the 3D fit spline and make it from this point
to that point. and the start direction would be this
Sort of edge.
And the end direction would be this one.
And those arrows should point to one another, like this.
Confirm.
Another spline from this point to that point.
Start direction over here, turn it around.
End direction on that one.
Turn it around.
Confirm.
And of course you could change the magnitude here,
or the bulge, whatever it's called.
And go for this side.
From this point to that point,
start direction here and direction there,
looks good, confirm.
Another one from this point
to that point, start direction
on this one, turn it around
and direction that one.
Great.
Now I can go for my loft.
So in order to get a very good result,
I want to split it in even more lofts.
So I want to split that surface by
planes which go through those lines,
points. let's go for a plane and again that's very very dirty i
don't advise it to do like this but it works. so i use this point,
that point and this point down
below and i've got a plane. confirm. another
one, again three points,
this point, that point and
And now I want to split the surface with those two, so go for split.
This should be splitted with that one, confirm,
repeat the command, split now this part,
so partly surface that plane,
confirm, hide those planes
to add some more 3D fit splines,
point, point, start direction this one
and direction that one, turn it around, turn it around,
Another spline here.
Start direction.
This one, and direction, that one,
turn this around, confirm, go here,
reduce the fixed line, this,
start direction, and direction, confirm,
and the last one over here from this point
to that point, start direction, this,
and direction, that one, confirm,
a loft here, a loft there, a loft here,
and a loft there, and then the in-betweens.
So, go for a loft.
Select surface,
this small edge,
that small edge
for match tangent,
match tangent, guides,
this guide, that guide, go for new,
confirm, same operation over there,
another loft, surface,
small edge, this small edge
here, go for match tangent,
match tangent,
the guides, one guide,
Second guide. New surface. Confirm.
I could hide those splines, the first four.
These could be hidden.
And then curve.
This one. This one.
The surface, sorry.
Need the curves.
Now I want
to do a loft here.
And the profiles are the more important for the tangency.
So match tangent and match tangent.
Like this small edge here.
Click here, click there, add this one
and a small one here, collapse,
this edge, go for guides, this guide,
that guide, new, same over there, loft,
surface, small edge of the surface,
some sort of filter would
be very nice, unselect that edge, okay,
this one and that small one here,
and of course I forgot now
to click here, click there,
happens, okay, collapse,
of course, match tangent,
and match tangent, and then add
this one, the guides,
this guide, that guide, new, confirm.
Now I want to fill those gaps.
One could try fill surfaces,
but first hide those curves, hide all curves.
So if I want to try a fill surface,
How would this look like? So go for this edge.
That edge, this one,
those two.
That looks pretty good, but I want it to match tangency.
So let's see if that could work.
Tangency, tangency, still a result
visible, tangency, and tangency.
I don't go for merge, fun,
see, it doesn't work.
So let's merge with all.
Not really.
The merge scope would be with this one,
that one, this one,
that one, see how this would
look like.
So, this looks pretty good, yeah,
so maybe I will try another fill on the other side.
That fill looks really promising,
see if that's possible over here as well.
So, go for another fill, select this edge,
that edge, this one, this one, and that one.
I try to make it Tangent, Tangent,
Tangent, Tangent, Tangent,
nice, and now merge it with
this surface,
that surface, this one,
confirm, again
a very nice surface.
So sometimes you have to change the approach a little bit.
Make another fill.
So, select edge, edge.
Quite nice, let's go for tangency.
Tangency.
Tangency, tangency and tangency.
Seems to work.
Merge not with all but with this one,
that one, this one.
So it can't merge with this one, obviously.
That's sort of a problem.
It just does it.
Now that's a problem.
It could merge with those, but not with these.
But, yeah, we should go for new.
That's a possibility and merge it afterwards.
Okay,
I'll fill
this side.
so, tangency, tangency, tangency,
tangency, tangency, make it a new surface,
great, really, really nice surfaces,
and now make a boolean operation
and put them all together, confirm.
So, seems I forgot this one.
I had that small car.
But of course I want not to merge it with that part down below,
so I will do another split.
Oh, I forgot again, over here this one should go.
And now split it.
Split this one with plane,
I think it was the right plane, this one.
Confirm and hide one of these.
And I'm done and I've got a really,
really nice surface here.
So of course you could try this approach
with the other programs as well.
Hope it was helpful, hope you enjoyed it, if you did like it,
please give it a like and leave a comment, if you want to see more,
please give it a like and leave a comment,
please subscribe to my YouTube channel, please subscribe
to my Facebook account, which would be very nice of you,
I want to get more likes and subscriptions over there as well.
Thanks for watching, see you to the next one, bye bye.