A different version because I want to use this method in the other programs as well. The catia v5 method works in catia v5 only - enjoy. Download the start stp-file here: https://grabcad.com/library/bicycle-handlebar-multi-section-loft-with-spine-central-curve-1 - If you want to see more, please give it a like or leave a comment down below. If you liked it please subscribe to my YT-Channel and to my Facebook Cad Page as well. For better a overview regarding my youtube videos - head over to my blog. -If you want to support my work, please watch my LinkedIn Learning Trainings, this really would help the channel. You can register for a free trial month with LinkedIn Learning. There are all kind of really great trainings available.
This tutorial demonstrates how to model a bicycle handlebar in Autodesk Inventor 2020. The process focuses on surface modeling techniques, utilizing patches, sweeps, lofts, and trimming tools to create complex organic shapes, which are then stitched and mirrored to complete the symmetrical part.
Hi, welcome to an Inventor 2020 video tutorial.
Now that bicycle handlebar exercise in Inventor.
So I've already opened the step file,
the start step file and let's begin with some patches.
Okay, let's go for a patch
and I want to use
This one. Apply, and of course you have to
make it visible again.
Now let's go for another patch
with this one. Apply with that one.
Apply and with this one.
Maybe make them not translucent so it's easier
to see. Now let's see if I can use
this as a path for a loft.
Just checking for sweep. Sorry.
No, not possible because you need a sketch first.
But first I want to do some offset surfaces. So where get my...
They are thick in offset,
thickened offset quilt, let's go for surface,
this one here by 20mm, fly, and
this one here
the other way round for 40mm,
maybe make those also
not translucent.
So let's do a 3D sketch, include
this geometry here, and we finish
the sketch and hide those
What are the elements you see?
Just for construction so I will go back
and this one as standard and finish that sketch.
Now I will need a sketch here to make a sweep.
So let's see this would be the
XZ plane and I want to sketch right there
and I just want to project the geometry
sketch and again it's for construction
because that's an option is available.
in 2020, so all projected geometry will
be as construction geometry. finish that sketch.
now i could do a sweep. go
for a sweep. this one here, that sketch,
it's already detected. surface
and this will be the path. okay. okay. now
i will need two copies
of this one. so let's check it out.
that would be pipe one. and i want to have
a copy of this one. so i go for thicken offset.
Quilt surface 0
on this one.
Okay, it will be pipe 2.
And another one.
Quilt this one. Okay,
that will be pipe 3.
And let's hide
those two.
The sketch on the
same plane as before,
that would be the XZ plane.
This should be a line, vertical line.
Dimension might be 40.
And that point here should be aligned with the midpoint of this line.
Finish that sketch.
Let's bring back the 3D sketch, which should be somewhere over here.
Yes.
Okay.
And I want to make another sweep.
Should be a surface.
Yes.
And that would be the profile.
This one.
And this should be the path.
Okay.
And let's call this one trim tool.
Plane trim.
Let's go for plane, which should be parallel to this one.
And it should go up to here,
which it doesn't do.
Edit this one.
Not really, let's delete it.
And I need a plane,
which could go to curve, does it work?
A plane,
can I select that point here?
So it should be parallel to the accept plane
and it should go up to this curve.
And that would be...
Would be nice to get...
So this one, so let's go for a point.
Let's see if can we go,
can make a point.
I'll take sketch point,
not really.
You can go for plane
and line point.
And let's go for this one,
height.
So that's really, really kind of awful.
Okay, let's try once more.
Line, and that would be the surface.
Now I've got a point, and I should be able
to do the plane right there with that point here.
this curve. okay now let's bring back the pipe
and let's trim that pipe with that trim tool
so go for a trim i want to trim with this tool
and i want to remove this side of the pipe
okay that and another trim
that plane here and i want
to move this side and okay
yeah it looks okay
and i want to trim those surfaces with trim tool as well
And I will need an extrude here and an extrude there.
So, let's go for another trim.
Cutting tool would be this one, and I want to remove this face.
Apply
that. No.
This will be the tool for the trim.
The face here.
Apply.
Cancel this out.
And I should call this... should have a name as well.
That would be... which surface?
It's pipe 3 right now, okay?
So let's hide pipe three, that's easier to trim.
Trim with this tool, this surface, apply that one,
apply this side,
apply that side.
Okay, three, hide
the trim tool,
pipe three for
translucent.
I need extrude here and an extrude there.
Therefore I will need, of course, some sketches,
otherwise it's not possible.
So let's go for another sketch on this plane here.
Let's project this geometry
and make it standard.
Finish that sketch, let's make an extrude.
Surface, yes, might be
20 in that direction.
Okay, we need
a sketch there as well.
Start a sketch on this plane here.
And again, project this geometry.
Make it standard
and not for construction.
Finish that sketch and make another extrude 20 millimeters.
Millimetres.
Okay, now I want
to make the loft.
So the loft, I cannot do the same loft
as in the other programs, but almost the same loft.
Okay, so let's go for loft and I want the surface
and to use that edge.
Therefore I should of course hide the surface
and that surface.
Because it's hard to select otherwise.
So I want to hide this one.
And that should
be this one here.
And maybe that plane at least for the moment.
Let's go
for the loft.
So this would be the first edge.
And of course it should be tangent to this extrude.
Then add this edge.
Then add those edges.
These.
That edge.
And now I could go for tangency.
Tangency.
This works quite well. But for the rails, I can use only one rail.
The second one will not work.
But it's already a very good surface here,
so that might be not a problem.
So let's go for the curves, go for the rails and select this edge here.
And make it tangent
continuous. And confirm
this one in the right way.
Now I could hide this extrude,
which should be, this one should go as well.
And that one, I suppose, yeah.
Now, for the rest here, I cannot do a loft.
I will go for a sweep.
And therefore, I will need another sketch.
A sketch here, it's like it is.
Or I could just cut off whatever.
Let's bring back the pipe here, the pipe tool,
and my trim tool to do it as similar as possible
to the other versions.
So I want to trim.
With this tool, yes, and I want to remove
the same side as before, apply, then I want
to use that work plane here as trim tool,
and I want to remove not this side, but turn
it around, and okay.
Let's hide the trim tool,
make this surface,
sorry, this surface,
and that would be the
pipe of course, three of pipe two,
part two, make it not translucent.
It will sort of squash that loft,
but I want to go for a sweep.
Sadly, that sweep can only have one rail or one curve.
There is no guide or rail option with the sweep.
So it's really very limited in Inventor.
Now I need a plane,
which should be on this point to that curve.
Then I can do a sketch and write that plane.
And I want to use those edges of this surface,
so go for project geometry from here
and select it and make it not for construction.
Finish that sketch. Sweep.
I can use that profile
and I can use one of these edges,
so we'll go for this edge.
Should work or not? Let's see. Doesn't work. Isn't it amazing?
Of course I can use this one, but I don't want to use that one.
So, I should be able to do that sweep,
or I could try to make, oh, that doesn't work.
So, the profile will be this profile.
Yeah, that's okay.
Of course, I could use that here,
but with advanced properties,
I want to use one of
those edges.
So, if I go for this edge here,
so I will take this one and confirm.
Make it not translucent.
Hide that plane here.
stitch those together, so go for stitch
this surface, that surface, this surface,
that one, apply, done, and hide, this one here,
let's see if it's possible here,
it was not, which one is which one,
so that would be the last one,
yes, and I don't need this, and
Those should be hidden as well.
Okay, and I could hide the 3D sketch also.
Okay, now let's make
this not translucent.
Mirror it, mirror
the ZX plane, this one.
Okay,
stitch it, not
translucent,
and I'm done.
So, this was helpful.
Hope you liked it. If you did, please give it a like
or leave a comment. If you want to see more,
please give it a like or leave a comment.
Please subscribe to my YouTube channel. Please subscribe
to my Facebook fan page. It would be very nice of you.
I want to go get more likes and
subscriptions over there as well. Thanks for watching.
See you to the next one. Bye-bye.