Be sure and follow @alpinesavvy and @hownot_2, and “Add to Favorites” on Instagram, so you never miss one.
Small print: ➡️ Contest goes from Feb 21-25. ➡️ Winner will be notified via Instagram DM, and we’ll post the winner on our Instagram feeds. ➡️ By entering, you agree to join the email list of @alpinesavvy and @hownot_2. . Per Instagram rules, this promotion is in no way sponsored, administered, or associated with Instagram. By entering, entrants confirm that they are 13+ years of age, release Instagram of responsibility, and agree to Instagram’s terms of use.
oh my
God this is a trat anchor and we're
going to talk about how to do it with
minimal slings today there's a right way
and a wrong way to clip those slings
let's find out a simple anchor is if you
have just two bolts that you can clip a
sling to and then you can create a
master point which you can do a sliding
X and if you're worried about something
extending put that through there slip it
over the top and that's called a girth
hitch Master point and so if one of
these comes off then you are still still
super redundant off now this part is not
the point of the episode we're going to
talk about how you can build cam anchors
in different ways or TR cam anchors if
you are a Triad in the gunks so a cam
anchor can be as simple as placing two
cams into a crack and clipping a sling
to it and you can do this or the girth
hitch Master point but can you put two
cams in evenly enough to just make your
anchor like this well you don't always
get a perfect crack like this so what
else can you do now if you have to build
the cams in the same crack you could
clip that sling and equalize it that way
but clipping here is bad or is it call
me cheap but I'm going to break test
cams that I've technically already
broken that has that cable SED but this
0 5c4 Camelot from Black Diamond has
this plastic thumb Loop which is
actually very nice to squeeze and this
X4 from Black Diamond also broken up
here but super good enough for this test
down here is more of a metal than a
plastic thumb Loop so we'll see what
happens there and then I have some cable
saging material that we can just pull
this way and then we can pull it the way
it's designed to see how much of a
difference there is
oh my God that was violently interesting
it started at
2kn to deform it but then once it got
wonky it's 11 I think that's a warranty
return not here it's not so after
reviewing the footage since I don't
stare at this while it's breaking I
believe this was crimped at the top lots
of other cams are made in different ways
like this alien which only has a crimp
right here here let's find out how
strong this
is not good for your cam but it'll hold
you you got to go wow that's hot wow
that's hot there you go you got it
impressively stronger than I thought
it's not dangerous it's dumb Let's test
the next
one holy crap it broke in the back full
strength so maybe that little metallic
collar thing is actually stronger than
it looks so there's a single cable
coming out here and this is where it's
crimped and the way it's shaped gave us
pretty good results I don't know exactly
what the results are because my load
cell doesn't work when you don't push
start so I'd like to show you the
world's lightest cam it has no trigger
and no loes and so I just crimped this
out of this cable that I have and then I
made another one where it's going to be
pulled the way it's
designed so it kind of ripped it out of
the side let's pull eye to eye now
that's actually not much higher y this
broken the sage like like normal if this
is your crack and you want Alpine
equalize I do not recommend this it will
damage your cam though it's stronger
than I thought it was going to be but
you could clip to that sling there or if
it's makes sense you can clip the
Carabiner like so and that will hold as
well you just want to push this in a
little bit further and that a little bit
in until they're basically feeling evish
now if this is reversed where the blue
totem is here and this is here you
definitely definitely definitely do not
want to do this that is all plastic up
all the way into the head but it would
be super good enough to clip somewhere
like here because you're pulling along
the stitching just fine you don't
necessarily want to do this because
you'd be pulling against the stitches in
a really awkward way so with a totem you
can clip that or you can clip the
Carabiner itself now if you want a
simple two cam anchor this might work
for you and that's called Alpine
equalizing but I would do recommend a
locker if this is going to be your
master point I personally like if I have
the cams and the time and I going to be
doing some wonky stuff like maybe
hauling and I want to put a quad anchor
here or I want to do an equalized
sliding X or I want to do a girth hitch
Master Point whatever your anchor style
is it can be
simple by having four cams without
trying to get weird equalizing all of
this with a whole bunch of slings and
cordet oh yeah let me have the blue
totem we are giving away a brand new
blue totem just like this if you want to
win it go check out our Instagram for
full details actually this one's pretty
old it's mine but we'll send you a new
one information will be down below
thanks for
watching