Shaping A Orchid Flower Spike

The Black Orchid Project
16 followers
1 Video ViewยทNov 16, 2022
Hey, what's up, everybody? It is Randy from the Black Orchid Project, and today I am going to show you something you may or may not know.
And I have a feeling there's some people that don't believe in this, but hey, they're to each his own, right?
But basically, what I'm gonna do is show you how I use bonsai techniques, like bonsai wire,
to actually shape the spike on this rescue orchid.
So, like I said, this orchid is a rescue, and it had already kind of run its course, had all its blooms,
and the previous owner didn't want it anymore and wanted me to take it off their hands.
And so, usually when I get one of these, or a rescue, if it's not obviously dying off the stem,
I'll just let it sit. And lo and behold, this one, after a couple days actually, popped a bud from here,
which I thought was going to be one bud, then it turned into two, and now it's turning into four buds.
And so, this is going to be a really, really cool plant.
And it's going to go through another bloom for another couple of months.
And so, if I didn't do what I did, it's going to be long and just kind of lanky, and it's going to have those flowers on the end.
And that could be really cool too, depending on the pots you put it in, you know,
if you were into designing your orchids or whatever like that.
But for this one, what I wanted to do was bring the structure down and bring the flowers closer to the plant
so it's a little bit more proportional when it blooms.
So, and I also like to, I'll call this the back of the plant, because that's where the spike is coming from,
and so I like my flowers to always sweep from the back to the front.
And so, with this one, what I did was put the, put the, sorry, put the wire around it,
and was able to turn it, turn it, and bring that height down a little bit.
And so, and actually it's been a while, so I can bring it down a little bit more.
And basically what that's going to do is, again, shorten it and give it a little bit more aesthetic when it blooms again.
And so I am going to show you, I got a new one and I just realized it has a little bloom on it,
so I'm going to show you how I actually do that.
So yeah, here is the plant I am going to show you.
And the actual plant looks like this.
This is one.
They got about three of these, and whenever I go to a big box store, I'm always looking for something unique,
and this one is pretty unique.
And so I actually picked this one up at a regular price, because I just had to have it in my collection.
It's a beautiful color.
It's got some really nice white tips here, and there's a little speckle on top.
Just a really unique kind of plant.
And so I brought it home and kind of redesigned it and put it in here, and that one's mine, my collection.
And I've always kept my eye on the other two now.
One did get purchased, I guess, and then this one was there.
And I walked in today and, you know, lo and behold, it's dropped.
It had seven flowers.
It's dropped its flowers already, and they see me coming.
And they're like, hey, Randy, we have a rescue for you.
And so they give me a really good discounted price on it, and I take it off their hands, so it's kind of a win-win.
And I got it home, taken it, and it's done, and it has a little bud right here.
And so I'm thinking this is going to have at least one bud.
If I can take this and bring this down some, I mean, it would look cool, just kind of like maybe bent back this way.
I could do that and bring it forward.
Because, see, I wouldn't want to turn it this way, like I said, and go, I guess I could go back front,
but this could also be cool to go back and then back, you know, come back forward.
So, but I think I might twist it just to kind of show you.
Now, these things are fragile.
I have to be very careful.
I'm just going to be really, really careful.
But I kind of know the tension that I can use.
So I am going to show you how I am going to shape this in just a second, so stay with me.
And basically, I'm going to use a bonsai wire.
This is what you use to wire blend the bonsai plants and styling them and shaping them.
This is a really thin one, so I'm going to have to double it up.
I've just got a couple of sticks and a wire cutter.
So that's going to be my tool.
So let me change the camera position so you can see what I'm doing, and then we'll go from there.
All right, so what we are going to do, here's my bonsai wire.
It's really thin. It might be like a 20 gauge.
I have some thicker. I just can't find it.
And so I had to double it up, and I need it to be twice as long as the stem itself.
So, like I said, I've doubled this up, and I'm just going to twist this, basically, to make it one piece here.
So, just kind of twisting, twisting, twisting.
It doesn't have to be too tight, but I do want it to get pretty tight.
So, it's twisting. Sorry, it's too long.
Yeah, twisting.
So, yeah. So now it's nicely twisted.
And this material, the more you work it, actually, the more firm it gets.
So, this is all nice and twisted.
And I think I'm going to do this one more time. Hopefully, it'll be long enough.
And again, just to make it thick enough, I am going to twist, twist, twist, twist, twist, twist.
There we go. So, now you can see it's nice and thick, but still pliable.
So, now I have a blunt end here.
I just want to twist that.
There we go. Alright.
So, now that's nice and thick, sturdy, yet pliable.
So, first thing I'm going to do is go in right next to the stem here.
And just kind of jab that all the way down to the bottom for security, so it stays pretty secure in there.
Ah, I think I hit a root.
There we go. Nice and sturdy.
So, I am going to start to wrap this.
And what I'm going to do is just take this really, really carefully and start to wrap this around this stem.
Now, remember, I told you, these things are very delicate.
So, I'm not wrapping it tight because I don't want to choke it off.
I'm just going to wrap.
And what this is going to do is kind of be like the old flexi toys.
It's just going to give the stem some structure and the ability to be bent and stay that way.
So, take this all the way up.
A lot of times I don't take it all the way up to the flower.
I'm going to leave it up here since I'm not going to be close.
Take that around a couple more times.
There we go.
Okay, that's almost perfect.
Alright, so now you can see it's all nice and wrapped.
And it will bend and support it.
And so, like I said, there's a couple things I can do here.
I could bend this back some and then bend it back forward.
But I don't think that's going to give it a nice shape.
So, I'm going to bend it back.
Now, the thing is too, once you start to bend it, it's going to loosen up the structure a little bit.
So, let's see.
I could go back this way real far.
And bring it back forward, kind of like a natural.
That could be really cool.
And then, that one bud there, it's going to fall over.
So, it would be a little higher and it would actually fall down and point at the viewer from the back to the front.
So, I think that could be really cool.
Especially, it looks like it's going to pop this way and it would just be one flower.
One single flower.
And so, I think that would be cool.
But I'm going to try one more.
That might be my go-to.
I just want to show you.
So, if I wanted to bring it closer to the bottom.
So, I'm going to bring it closer there.
And I'm going to reduce some of the height on this thing.
So, again, we're going to do this really gently.
I know it probably looks like I'm just manhandling the thing.
But with the wire on there, again, I can make big bends.
See how that's bringing that closer to the bottom.
And what I eventually want to do.
I don't think I'm going to make it all the way.
What I would do.
I haven't decided.
I might stay with the other design because I really like that kind of cascade look.
But what I would do here is actually take a stake and put it here to hold it in place.
Put one there to hold that in place.
And then as I start to bring this back around a little bit.
A little bit at a time.
So, like every day I'd probably just go and bend it a little bit more.
I would actually pull another stake here.
And start to work it around by getting another piece of wire and pulling it.
And just a little bit at a time I'd pull it around.
I'd tie it off to this one.
And I'd tie it off here.
And then pull it to this one.
And it's going to bring that around.
And it might take a couple of days.
Like I said, it'll kind of get settled in.
And it'll bring it around.
And the next thing you know, this is going to be really short.
This will be a really short poster flower.
So, as small as this flower is, it's going to give it a really compact look.
And then, once it gets settled in, these can be taken out.
And then it'll just kind of be freestanding with this bend in it.
And shaped.
And so, this would go into...
Probably do.
Sorry about the sound.
So, this is going to be that really cool red flower.
This is going to be that really cool red flower.
Sits in this.
So, it almost looks like an active violin.
That would be kind of what that would look like.
That single.
That single would just sit there.
Facing forward.
And just kind of look like that.
So, I think that would look cool.
And then, kind of like the size of this.
Sorry, I'm going to fold this here.
And then you've got the white one.
With that single flower popping that way.
And even if it cascaded back, that's kind of what it would look like.
So, sorry about that.
And that's what it would look like.
But, I have not decided yet.
And I will keep you updated on the whole project.
So, I hope this was informative.
I hope you'll give it a try.
Especially with your spikes or your flowers that's gone out of bloom.
And you just want to try it.
And if it breaks, it breaks.
If it doesn't, then cool.
Like I said, I think there's some people who don't really care for shaping spikes.
But I do because I like to design the flower at the end of the day.
So, that is it.
Check out Black Orchid.
The Black, I'm sorry, the Black Orchid Project on Instagram.
And stay with me here on Black Orchid Project on YouTube.
So, until next time.
