Product Review: BAMF Plate Front Bumper

Travel Instincts
32 followers
2 Video Views·Oct 23, 2022
Hi, I'm Trent from TrailsOffRoad.com. If you've watched our channel for a while,
you know that I'm the stock truck guy who drives the stock Otako up trails it's not expected to do.
But this year, the stock Otako has lost its title, and it all started with this BAMP plate bumper.
Now don't get me wrong, I'm still a huge advocate for wheeling your stock vehicle.
The Tacoma comes from the factory with impressive approach angles, but more than once over the
years, I've been worried about bashing the stock plastic bumper cover. Plus, I have been wheeling
the Tacoma for over 10 years, and I'm way overdue for a real self-recovery plan. I needed a winch,
which means I needed a winch-capable bumper. I needed a BAMP. Now of course, everyone knows
that BAMP stands for bad a**. What? Oh, Bay Area Metal Fab. Well, it's still pretty bad a**. Now
because the majority of trails that I have mapped for trails off-road are in the high country of
Colorado, most of my trail time in the spring and early summer is spent finding out where the snow
stops and how far up trails are open. So as you can imagine, there are a few places where a front
mounted winch can get me over a hard spot. More often than not, I am as far up the trail as I can
get, so if I get stuck, I need to winch backwards. My plan then was to get a receiver hitch in the
front instead of a winch plate, and then use a removable winch cradle that I could hook up
at either end. Granted, winch cradles are heavy, and the wiring is more complicated, but for me,
it was just the tool that I needed. Being able to put the winch on the back also means that when I
start to slide off the trail and get into a bad spot, I can winch my back end back up onto the
trail. I called up Jerry at BAMP, and he said it would be no problem to swap in a receiver.
Now, between my custom order, and corona, and supply chain issues, it did take a while for
the bumper to show up, but when it did, man, I was pumped. This thing is seriously stout.
The craftsmanship is top notch, and every weld was perfect. My next concern was weight. The
stocco taco was not going to fare well with an extra 200 plus pounds added to the front.
I went ahead and ordered an old man emu suspension to cope with the extra weight,
but it turns out the BAMP is strong and light. The website listed at 140 pounds,
and mine arrived at a svelte 127. So after upgrading the suspension and adding the bumper,
the stocco taco stands an inch and a half taller than the leveling lift that I already had on it.
That's almost three inches over stock. So ends the stocco taco, but what am I going to call it now?
How about taco supreme? I ordered my bumper bare steel. I learned a long time ago that good
quality rattle can primer and paint holds up to most anything you can throw at it.
Plus, it's a lot easier to touch up than powder coat. But to be honest, with such a complex shape
as a plate bumper, some rattle can experience is required. My old double row light bar would
not fit in the new bumper, so it got a new home. Instead, I ordered this 32 inch slim single row
bar from Cali Raised. The only problem was that the included allen style hardware doesn't work.
But after a quick trip to the hardware store, I got it figured out, and it fits like a glove.
The installation instructions from BAMP are pretty basic. No pictures or diagrams,
but the install is so simple I didn't feel like I needed any more than I got. I was already
familiar with the process of removing the stock bumper, and the new bumper install is pretty
straightforward. BAMP recommends three people to install the bumper, so I invited a couple of
buddies over. Like I said, the bumper is relatively light, so it's less about the extra muscle, and more
about having three sets of eyes on things to make sure you don't bash your fenders or your headlights.
I thought I might want my floor jack to take the weight while we got it lined up, but even that
wasn't really necessary. You will need at least a couple of sets of arms in order to get some of
the nuts and bolts tightened down, and it doesn't hurt if at least one of those sets of arms is less
Popeye and more olive oil. It's important to leave a good gap between your bumper and your fenders.
I'll show you why in a minute. I use some 3-8 inch plywood scraps. This not only gives you a good
guide, it protects your fenders in case the bumper slips while you're getting everything level.
The reason you need a good fender gap is that when you're wheeling, your truck's frame and body flex,
and if you don't have enough room, the bumper will flex right up into the fender and do some
body damage. Now, I probably could have gone with more than 3-8 of an inch, but time will tell.
So there you have it. The BAMF plate bumper looks awesome. It's incredibly stout, yet relatively
light. The center approach angle on the taco supreme is a little bit better than stock, but at
the wheels, it is insane, allowing me to fearlessly take on obstacles I never would have tried with a
stock bumper. And most importantly, I now have a way to self-recover when I'm out there checking
snow lines, so I can do status updates for you guys on TrailsOffRoad.com. Stop by TrailsOffRoad.com
and we'll see you on the trail.
Transcribed by https://otter.ai
