Diseño de UÑAS en TENDENCIA | LAVA CON RELIEVE | Tutorial de uñas

[Music] Hello, how are you, welcome once again to another video, I am Jessica Alba, I am very glad that you are here and today we are going to see this new nail design that is in trend, it is like lava, like relief, it is super divine So let's see how to do it, it's super easy, the truth is that you can use any base color you want. I'm applying this non-translucent color but we're going to give it two coats. After it comes out dry, I'm going to apply a light coat of Top Coat because I am going to apply a layer of mirror effect if you want to know more about the mirror effect different ways to apply it I leave you a link in the upper right corner of the screen so you can go and check it then once we have applied the mirror effect Remember that you can apply it with a sponge, a silicone brush, your finger or with whatever you can or want, but I am going to be applying it on the dry layer of Top Coat. I am not going to protect it. I am going to leave it like this because I am going to grab construction gel. but we are going to take a generous layer we are going to take an exaggerated amount but check yourself you are going to apply it like that and it goes away but we are not going to make it look like dripping remember that here you must have a lot of control with the construction gel so as not to get it bubbles, the secret is not to remove the brush or the tool with which you are placing it, so once we have placed the construction gel, we cure it for 60 seconds and when it comes out dry, remember how we did not protect the mirror effect layer It will be very easy to remove it with a gauze and your cleaner. So clean it very well and when it is clean. Now you can protect it with top coat. Be very careful here when applying the top coat because remember that since you have a lot of relief with the construction gel, it will not We want to leave not a single capita out there without protection when you have finished crazy for 30 seconds and it is ready here I will show you it already dry fresh out of the lamp I want you to see this effect as it looks with the relief In this second way of making this design We are going to be modifying it a little because this time we are going to be making these as spots, these are like splashes but manually thanks to a Liner. Well, also use a pointer if you want or any other tool. I suggest that you make these spots a little big so that you remember you are going to be putting construction gel on it So the bigger the shape where you are going to apply it, it will be much easier for you then after shaking it very very well Now we are going to take the construction gel Remember a generous amount and let's to be applying it on those little spots, just remember to do everything possible not to put bubbles in it so that it looks as neat as possible. In this swatch, I am doing it like this, that is, without a background color because these designs can also be done like this on the nail. transparent and they look very very good, I chose this silver color right now But you can use the color you want or you can even change the mirror effect for any other effect but I really like how it looks with the mirror effect and like in the previous one We use a gold mirror effect because we do not use the silver one. We continue applying the construction gel very carefully and when we have finished we cure it for 60 seconds when it comes out dry from the lamp. Now we protect very well with the top coat and we cure again for 30 seconds for this Third and last way to make this design, we are going to vary it a little and we are going to be using foil. So we are going to select very well the roll that we want. I am going to use one that is not so loaded, so saturated so that stay a little bit within the Design Range. If you have questions about how to use the foil glue or how it adheres, I have a specific video that I am going to leave for you right now in the upper right corner of the screen so that at the end of the video you can go and you check it in the same way, I'm going to leave it in the description box so you can go and check it in more detail calmly. So we're going to measure our foil so as not to waste it. And remember, the opaque part always goes down, the one that goes with it. the glue and the shiny part will always go upwards. So we put it on and start applying pressure to get all the air out. Don't worry if there are areas of the nail sample that don't adhere very well or that look like folded because remember We are not going to encapsulate the entire design. Okay, it's just a few small parts. So now comes the good part. We grab our generous amount of construction gel and start applying it. Remember not to put bubbles in it. If it 's dripping somewhere, you can easily grab it and modify its position. This is what I love about construction gel, when it comes out dry we will be removing all the excess. Remember that all the effects that you are going to apply while they are not protected with a layer of Top coat or a layer of Top Finish will be very easy to remove with a cloth and cleaner when we have finished cleaning we protect very very well with our top coat we put it to cure for 30 seconds and it would be ready and here we have the final result I really loved it I am very fascinated by this design leave me in the comments if you You like it too But remember that my camera is a little strange So I'm going to put a white sheet so you can appreciate it much better and Now check them out, they are divine So leave me a comment telling me what you think and you already knew this effect if it solved your doubts Don't forget to subscribe, it's completely free as well as activate the notification bell so you don't miss any content if you liked this video Give me your like I'm Jessica Alba I love you so much I send you a big hug and see you in the next video bye