Let's Fix A Broken Wheelbarrow With A Cutting Torch....

today's project is going to be a wheelbarrow you can see that's been that's been this is the worst can you see that the handles are nowhere close to each other and that is because this right here so want to figure out how to fix that and in return the axle the axle don't hurt me for the wheel - awkward and I think that's because the drums only do that brand-new blue bar fell out the truth got tore all up so let's see if we can fix it pump it back come on take it apart a little bit and see what you do here okay so I laid it down then I got this it's about a dead below he's got like sand in it weighed it down I beat on it a little bit and I pulled it just hold this side out it popped right up had it laying on these tires so we would scratch the paint up that had a couple little dents down in the bottom hole heads up and this front this front here was the worst and it pulled just about every bit of it up now this is what happened to this one took screwed up it just fell all apart so we're gonna get screwed start putting this back together and see if we can get that one side on there this one side bent real bad want to figure out how to fix it but we're gonna try to get to the other side on and give us a few and we'll be back here in a minute so here's what we're working with we've got a kink then we've got to try to get out got another kink on this kink on this and I'm thinking these probably yeah there's one on the bottom there so we're going to pull the kinks out and Trust straight and we'll be ready go we'll use the cutting torch this time come on have socorro hold the camera its Corey staticky and so stem so they can watch [Music] it's poor going yeah and watching hey look okay I know more look like a flannel you need and when okay one you know concave here get back up and get this hot here real quick okay we'll be back with you here isn't just a few more we get a little farther at home but you get the gist you just keep keep working it there it's pretty straight there but I'm gonna cut it I'm gonna cut it right in the middle of that so I can rework it and get it get it right it wouldn't be right unless I do I'm gonna cut it right there with a soul and beat it all out then I'll put it back together and weld it it's the only way I can see the fixative relatively quickly mount extender all day with these bars and sticking there and bend it and all that good stuff but he's this way is to just do this I believe okay I stuck this pipe in the end of this thing pretty thick pipe pretty thick pipe in comparison to this demo and we'll stick that pipe in there and then I'm going to stick this over the end of it then I'm gonna weld it all together so it should be strong but we'll get back to you when we get this done okay here we go this is Jeff what we're done we don't know it there and that's got that pipe in there now we hadn't read drill the hole obviously was the pipe one right through there but it's all good there now the tire is not all walking Joanna that's because all this has been beat back out no this is caved in in there it's coral grab that sucker come back here handles was a big thing damn again all of the the barrels bent back right now it looks like a Socorro Jekyll it is it way no no way no way [Music] okay do we have any paint paint door