Some of the links provided are paid links. As an Amazon Associate, we earn from qualifying purchases. We are members of similar affiliate programs with other companies as well. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
Look how stinking cute. And you can
either do gold
>> them. And I love I honestly love that
they're a little distressed. All right,
y'all. Look at this right here. Oh my
gosh, the stockings, the adorable
stars. I am Guys, you've got to make
some of these so precious. Think about
where you would hang these up.
>> Okay, so today we're doing something
that I don't even know if it's going to
work. I don't know what it's going to
look like. I don't know how it's going
to turn out. But y'all, we're going to
attempt to cut metal with our Cricut.
What? I don't know. Let's find out. But
in today's video, we are going to be
testing,
can we really cut this metal with our
Cricut? And not only that, can we cut
this metal with our Cricut with a fine
point blade? So, if you are ready to see
if this works, see if this doesn't, and
make this amazing project, this mantle
display, if you will, make sure you
stick around to the end of this video
and see what works and what doesn't.
Now, before we dive into testing and
talk about all of the different
materials that you are going to need for
this project, I don't know if you've
heard, if you've been around our channel
for a while, Christmas craft week is
happening. And y'all, it's next week.
It's happening next week. So, if you
haven't signed up, go ahead and go get
signed up. We are gearing up for a
phenomenal
full week of crafting with you guys.
It's going to be epic. You cannot miss
this. Make sure you click that first
link down below. Get signed up for
Christmas craft week. We're going to be
going live every single day next week,
Monday, Tuesday, Wednesday, Thursday,
Friday, bringing you 20 plus
amazing projects. So, if you haven't
gotten signed up yet, make sure you
click that link down below and get
signed up. Now, for this project to
bring it all together with our fingers
crossed that the Cricut is going to cut
this, um, here is what you are going to
need. So, starting out, we have some 18
to 20 gauge gold wire. This is what we
are going to use to string our metal
stars. And I don't know if you guys can
see this. I'm trying to hold it where
you can see it. So, you can see it's a
very malleable, very bendable and
moldable um gauge wire. Um, so this is
what we are going to be stringing the
stars from and stringing it across the
mantle. So, grab you some gold wire. 18
or 20 gauge is fine. Next up, we do have
our Cricut True Control Knife and a
breayer. This is just going to help you
really get that um metal onto our mat.
Which speaking of our mat, we are going
to be using
this bad boy here. This is a strong grip
mat. Um because we don't want our metal
to go anywhere. And but also to keep it
from going anywhere. If you have trust
issues like I do, I like to tape
material down. This is just some scotch
painters tape. If you are having issues
having materials to stick to your mat,
go ahead and just have some of this
handy. Keep it in a drawer in your craft
room. I'm telling you, it has saved me
more times than it has not. And then the
last thing that I have is going to be
these are just jewelry pliers, but I'm
using them because they have wire
cutters here. Um, so this is just to cut
the wire what we're going to string the
stars from, and we'll show you. So,
those are all of the materials. Oh,
finally I forgot. We are using this
metal. Now, this metal
is very similar to like a heavy duty
aluminum foil.
So, I don't know what else it would be
akin to other than aluminum foil. It's
just like a super heavy duty aluminum
foil. I personally
do not think that the Cricut is going to
have an issue cutting it, but my biggest
concern is is it going to get stuck? Do
we use the star wheel? So, we're going
to test all of this together. But just
so you all are aware, all of these
materials are going to be linked down
below for you. Right under that link for
Christmas craft week, you're going to
find all of these materials linked down
below. So, if you want to recreate this,
make sure you click those links and grab
these materials so that you can finish
this because I really think that once
you see the final product, you're going
to be obsessed. So, let's go ahead hop
into Design Space. Let's get everything
set up because I also think we're going
to have to make our own cut settings.
So, if you don't know how to do that,
you're going to want to stick around
because I'm going to show you exactly
how to do that. So, let's go ahead and
head over to Design Space. We're going
to set everything up and start the
process of testing if our Cricut can cut
metal. Now that we are here in Design
Space, this is where we want to end up.
But to get here, you will need to
download the file either from the
website or if you look in the
description of this video, you can find
the link to the file as well. The name
of the file is going to be metalar
banner. But once you have downloaded
that from the website, what you're going
to do is come over here to upload.
You're going to upload image and then
I'm going to bring my finder back into
view and we are going to download this.
This is what it is going to look like.
You're going to hit continue and then
upload. Now, it does upload pretty
large, so you do need to size it down.
We like ours to be around 3x3. Um, you
can make yours as large or as small as
you want. It really doesn't matter, but
all you're going to have to do is size
it down accordingly. and then duplicate
this as many times as you would like.
Now, I will say I think it would be good
if you had some smaller ones, some
larger ones to add some like different
variation. So, don't be afraid to play
around with the size. You find what is
going to work best for you and the place
that you are decorating, but all you
have to do is size and duplicate. Now,
once you have done that, that's the easy
part. We now have to figure out what is
going to cut this metal on the Cricut.
So, I want to show you a little trick
that I like to do, and that is when I go
to make it, I'm creating my own cut
settings. So, coming over here to make
it. Now, one thing I do want to make
sure you all are aware, and I'm just
going to go back and hit cancel. We'll
make this one the same color as
everything else. One thing I do want you
all to be aware of is you do have to be
connected to your machine before you can
create a new cut setting. So, we're
going to connect to our Maker 3. And
then once you are connected, we will be
able to go to continue. Now, here is
where I like to look at my materials to
determine what I may make a new material
setting at. So, first thing I'm going to
do is I'm going to come down here to
where it says browse all materials. You
can kind of look at all the materials.
Now, this is in the compatible. You can
also search all materials by toggling up
here. But what we really want to do is
down here at the bottom it says material
settings. That's where I like to look
and kind of determine what is going to
cut this material. So, this foil is I
would put it puts me in mind of maybe
like it would be similar to an acetate,
probably a little easier to cut because
it does rip pretty easy where acetate
doesn't. But I can see that acetate is
cut on a pressure of 280. I don't really
know that that's going to be enough
pressure. So, I want to kind of look
through here and see what all else is
similar. The first other thing that I
thought about was heavy card stock. So,
heavy card stock gets cut on a pressure
of 310, but if you've noticed, both of
those have two passes. I think to be on
the safe side, just to kind of like play
around with it, you can start with like
three a pressure of 300. I think I'm
going to go with 320 just by looking off
like holographic card stock is 275 two
passes and those those are all with a
fine point blade. Light chipboard is 327
with two passes. So I think anywhere
between 300 and 320 would be good for
this one. So I'm just going to come on
down here. We're going to add new
material. From there what you are going
to put in you can name it whatever. So
you can name it metal sheet or whatever.
So we'll just name it metal sheet. Metal
sheet. Then you're going to go to save.
And now is where you determine the
pressure. So I think I'm going to go
with 320. And then I for sure I'm going
to turn on two passes. And then we're
going to see if that's going to cut. So
now all you have to do is hit save. You
can see that it puts it in alphabetical
order here. And now what we're going to
do is we are going to browse all
material. We're going to search up that
metal sheet that we just put in there.
We're going to select that. You can even
bookmark it if you plan on doing it
quite often. Then we're going to hit
done. And now we are ready to load the
material onto our mat and load it into
our machine. And we're going to see if
this cuts. So, now that we have that set
up in Design Space, I'm ready to add my
metal sheet, aluminum sheet, whatever
you want to call it. I'm going to add it
to my mat here. And I'll bring you down
so that you can see. So, what I'm going
to do is I'm just going to
place this down. And I'm just going to
roll it out the length of the mat like
this.
I'm going to take my brayers and I'm
going to bray it down onto the mat to
smooth it out as well.
So, do you see how that's smoothing
that? And that's why I think for this
project a breayer is a great great thing
to use.
And then I'm just going to take a true
control knife. This is going to tell me
a lot. How well this cuts with the true
control knife. is gonna tell me a lot of
what I need to know and how much
pressure I'm having to put on the true
control knife.
Okay. So, once it's cut, it gets cut
pretty good. It was a little bit
trickier to get it started with the true
control knife to cut it,
but I do think we have it down on the
mat really well. I think I'm going to
not tape. I think I'm going to trust it
this time. Maybe we're not going to
tape. We'll see how it does. If it
doesn't work, we'll come back and figure
that out. Now, I'm going to bring you
over here to the actual Cricut because
one thing that I am going to do that I
am afraid is going to make lots of marks
are these star wheels. So, if you are
working with a material that does like
take on an indention, you do need to
make sure you move your star wheels. So,
these are placed on your machine to kind
of help your material stay on your mat
in case your mat isn't holding it down
as well as it should. They are great for
vinyl, HTV, paper, things like that. But
if you are working with larger
materials, these star wheels need to be
moved to the side or like we're working
with this metal today.
It's a very it takes on inventions a
lot. So, we need to make sure that we
move our star wheels over to the sides.
So, I'm just going to do two on each
side to keep it even. I'm going to move
my housing over and I'm going to pull
this one over to the side. So, now we
have our star rules. You can see on
either side. And now what I'm going to
do is I'm just going to load my material
here,
which I will say
the star wheels aren't putting in
as much of an indention on the side as I
thought that they would be. Or are they
not touching? Maybe they're not
touching. Maybe they are touching.
Either way, we've moved them over to the
side. But once you have that loaded, we
have our material that we already made.
We are going to press this flashing play
and we're going to keep our fingers
crossed that it works.
And if it doesn't, we'll go back to the
drawing board and try again.
Okay, you all know the drill. Especially
when we are working with new material,
we don't pull it up until we know it is
cut all the way through. And I actually
had a corner of one of these stars get
must have gotten like hung up in the
housing because I can already tell you I
do think that these this did cut all the
way through.
Now it's just going to be a matter of
getting it off of our mat. So what we're
going to do now, we're going to unload.
We're gonna bring it over here and let's
start the process of getting this
material off of our mat. So, I'm going
to flip it upside down first.
Okay,
it's coming up. Do y'all see how it's
I think I'm going to pull it up this way
so that we can unload it. So, that one
did it did tear, but it doesn't matter.
We don't need that part of the metal.
We just need the stars. So, we want the
stars to be the flawless part.
And that part is just ripping off.
Okay. So, obviously it cut all the way
through beautifully. But now, how do you
get these up off the mat without
damaging them? My suggestion is get you
a little scraper tool. And what I'm
going to do is I'm just going to use it
to ever so slightly pull up the edges of
the star like this. So, they are going
to curl a little bit, but I'm just
pulling those edges up and trying to
keep it as close to the mat as possible.
You do have to be careful. Did you see
what I just did there? I did rip this
corner. So, we'll start again. So, you
do have to be careful.
You see this corner I ripped? So,
unfortunately, there goes one of our
little stars.
So, let's start on this one.
So maybe even not going all the way to
the
as close
to the center as you can because not all
stars not all of the points are up. So
we don't want to rip into the center
point. So what I'm doing is I'm just
pulling that up. And now
I'm going to just gently
pull that middle portion up. Now it's
going to look funny, but what I'm going
to do
is we can lay this back down like this.
I'm going to get my brayer and I'm just
going to straighten that out
on a flat surface.
Look how stinking cute. And you can
either do gold or silver or both. So,
we're just going to keep working and get
the rest of these up off the mat. Once
you have gotten them all off the mat,
what I'm doing now is I'm just going to
take my breayer. Once again, I'm just
going to
braay it down to flatten it out some.
You can also use your hands. I did have
a corner right here turn. We're just
going to fix that
right there.
Spray that down. And then we're just
going to straighten this guy out. And
then we're going to start assembling it
together with our wire.
Now, once we've kind of flattened all of
our stars out, what I'm going to do is
you are going to grab your wire that
you're going to be hanging these from.
And you are going to cut a piece that is
as long as what you want to hang on your
mantle. So, it may be a fairly long
piece. Um, but we are going to cut a
piece that is long enough to go from one
side to the other. And we're just going
to take our wire cutters. Very easy. You
can actually cut this wire. You can bend
this wire yourself. You don't have to
have wire cutters. You could do this
with scissors, but I don't suggest
cutting wire with scissors ever. Um, and
then once you have done that, we're also
going to be hanging the stars from the
wire as well. So, you need to cut
varying lengths of wire to hang your
stars from. So, some of them you want
hanging lower, so you want longer pieces
of wire. Some of them you want hanging
to be hung shorter. So, we're going to
do that. And how you're going to do that
is we're going to take this. We're just
going to thread it through the center of
that star. Loop it around the top. And
we're just going to add a twist to keep
that star on the wire where we want it
to be. And then we're going to make sure
that we bend this back out. And you can
twist as tight or as loose as you want.
I like it to be a little bit loose. That
way it kind of like hangs pretty freely.
But once you have done that, the last
thing that you have to do is loop it
onto your main wire here, which this one
I cut is is a little bit long. So how
you're going to do that is you're just
going to loop this over and just wrap it
around there to keep it wrap it around
this main wire to keep it secure and
snug so it doesn't go anywhere. And then
once you have wrapped it a couple times,
you can cut off that excess. We'll grab
our wire cutters,
cut off the excess here,
like this.
And then that's it. You're just going to
keep hanging the rest of your stars on
your garland. And then once you have
done that, we will be ready to hang it
at the bell house. Okay y'all, we are at
the house. And now what we're going to
do is we are going to go ahead and start
stringing up this amazing garland.
Y'all, this is something that we've put
and talked about in our videos quite a
bit about having some really awesome
garland that you can use year over year.
you know, this year when we've been kind
of redoing our theme and making our
projects and things like that, we
haven't had to buy a ton of stuff
because we have amazing garland like,
you know, different pieces like this
that we've used for four or 5 years. So,
when you think about investing in things
like that, I just love to remind you
guys that you'll be able to use it over
and over. You can store it, you can
reuse it, and honestly, it lasts for
quite a while. I would say this has
lasted us already three or four years
and we'll definitely be able to get
three or four more years out of it. So,
it's super awesome. What we did to prep
the surface so far is we went ahead and
added some command hooks right here. So,
this is a really unique one um that is
more so for the garland and then we'll
be able to fluff it and then after that
we are going to add our amazing project.
So, it'll be super super awesome to be
able to hang it up. So, let's go ahead
and get started. One really fun thing to
note is what we're using to hang up uh
lets you know that you need to kind of
secure it an hour before. So, we went
ahead and put these on about 6 hours
ago, so it's nice and ready for us to
use. And these are actually made for
cord organization, but we think it'll be
perfect for our garland and that we'll
be able to fluff it and things like
that. So, um you know, you won't even
really be able to see it. So, that's our
hope. That's our vision. Let's see if we
can bring it to life. Okay, who's going
to help me do this? Because I Listen, if
I know one thing's for sure, two things
for certain, your boy Tanner is not a
pro at hanging this garland. Okay,
Courtney is going to be my assistant or
I'm her assistant, whichever one you
want to assume. You know, we want to
give a little area. This is a lot. Okay.
Ooh.
Okay. I'm seeing the vision.
This is cool.
Boom.
Boom. Boom. Boom.
How How does it click in? Oh. Oh. Oh.
Shut up. Wait. What? Oh my. No way. No
way, y'all. That looks good. This hack.
Can we just give y'all a closeup? I
didn't think that would work. Okay, look
at this. Oo. Okay, we just hung that up
and it was the easiest thing I think
I've ever done. Like you can't even find
where we where we clipped it in. Look at
that. Do you see that over there? It's
just hiding. Y'all, that is y'all. Did
Courtney, did you see this on Tik Tok?
How did Ah, you did see it on Tik Tok.
That's the secret.
Okay. Oh my gosh. Look at this. We're
getting this hung up. It's going to be
awesome. Here, let me help.
>> We tried last year, but we didn't hang
them.
>> M 6 hours ahead. Oh my gosh. This is
incredible.
What a hacky hack. Oh no. Oh no. It's
too short. I think we're going to need a
little overlap. Okay, we're going to get
this hung up and then we'll come back.
Okay, y'all. So, we just want to let you
guys know we have decided to put our
stockings over to the left side. So,
look at these adorable ones. We have
three. So, that'll be perfect. So, we're
starting our wire right here. And then
it's going to go really tight all the
way under all the way over. And then
what we've done is we're going to
manipulate the height of all the stars.
Um, and all we did was we tied off this
wire is so easy to just like tie into
any part of your garland. Um, and then
we've added just a couple of these.
We're able to like floof them. And I
love I honestly love that they're a
little distressed in transport. So you
can either manipulate those like
Lauren's doing now. We'll be able to do
different heights. So we'll kind of
bring the height up and down. Um, and
then we're just gonna continue to add
them on. Lauren, do you have any tips
for Let's just show them how we kind of
added them on here.
>> So, we are just, um, right now they're
just looped, so they're kind of free
moving at the time, but once we get them
secure, we're probably going to like get
something to like crimp this down so
that it stays put.
>> Beautiful. Okay, so we're going to do
that and then come back. All right,
y'all. Look at this right here. Oh my
gosh, the stockings, the adorable
stars. I am so obsessed with this. I
mean, just take it all in. Take it all
in. They're adorable. Oh my gosh. Let's
focus in, guys. You've got to make some
of these. So precious. Think about where
you would hang these up. I mean, so
beautiful. And then with the stockings,
this is everything. Oh my goodness.
Okay, what did you guys think? Oh my
gosh, I love it. So, so fun. It has been
so much fun getting to try out this
material with you. Like, holy cow, I
cannot even believe um that it first of
all worked. I love that we were able to
work out all of the kinks and really
perfect it together and then bring it
all together inside my home with this
amazing garland. And yeah, we're all set
up for Christmas. I am so excited. If
you have not went ahead and grabbed your
Christmas craft week ticket, what are
you waiting for? Go down below, click
that first link, grab your free ticket
to Christmas craft week so you can craft
a ride alongside us November 3rd through
the 7th. It is going to be epic. So go
over there. I'll see you back here real
soon. Thanks for watching, guys. Bye.