How to Install Toilet Paper Holder for Dummies/Preview

VideoJoeKnows
61 followers
510 Video Views·Apr 28, 2026
How to install toilet paper holder for dummies preview is what this DIY howto video is about. VideoJoe is now going to be starting to install a toilet paper holder & he will be showing you a few things on this toilet paper install that you may have never seen before so he wanted to make this video to show you! Watch & learn as VideoJoeShows you what VideoJoeKnows...how to install toilet paper holder for dummies preview. Nice!
Well, what is our project today? We're in the bathroom, my favorite place.
And good grief, looks like we've got all kinds of stuff here. And look it, you notice anything?
There's no toilet paper holder over there. And I'm going to install this toilet paper holder.
Are all toilet paper holders created equal? Absolutely not. This one is slightly different
than most common ones. This does not have a set screw on the side of these of the end pieces.
No little screw for an allen wrench or a small tiny screwdriver. It attaches a different way.
And hey, if you want to see how to install a toilet paper holder such as this, stick around.
Now, is there any rhyme or reason as to exactly where to put it on this wall and the height and
how far in front of the toilet or behind the toilet it goes or anything like that? Not really.
I had Mommy come in here and Mommy came and she sat down and she held it up there and she put
her hand up over here and she said, that's where I want the center of it. Okay, so I've got to
figure out how to get that installed. And that's going to be the center of the towel of the paper
of the toilet paper holder. So I'm going to have a bracket here and one over here.
Okay. Yeah. I got a level here. Yeah. Stick around. I'll show you how to install this.
Now in with every toilet paper holder, there comes a template and sometimes it's in the
direction sheet. Make sure you read the directions because like I said, not every toilet paper holder
or towel bar are created equal. And see, here's the template right here from there to there. You
can see the little holes there. Can you believe that? And then here's here from here all the way
over to here is a template. See, they use the same directional sheet for an 18 inch towel bar.
And if you can't find it on this, you may think, hey, they jipped me. It's not on there. You know,
I've seen some where it might, the template might be on here and you have to cut it out
or it could be on the back or this side. And you just have to, you just have to check things out.
And so I'm going to, I'm going to read these directions and I'm going to get ready.
I'm going to pull this apart and see, this is not like, look, this is the only two pieces. This is
not like a regular one. It goes on like that. And then this is on the wall and this swivels up,
put the toilet paper on, push it back down. You know, they never used to have things like that.
And I saw one in the condo upstairs and I thought, oh, I hope I can find one at the store.
And sure enough, there was, I found literally like four different styles that looked kind of
like this. And this one is the closest that I could find to match the one upstairs in the guest
bath. And so I installed one of those in the master bathroom just now. And I'm going to be
installing this one here. Now, like I said, not all toilet paper holders are created equal.
Now here's the back piece. And usually you'll see that there's a set screw right there that screws
a little screw in or out right there, either, well, either on that side or that side, whatever
side's the bottom. And it will either be a small little tiny Allen wrench to tighten that up or a
small tiny little screwdriver like this to tighten it up. This one doesn't have it. So like I said,
not all toilet paper holders are created equal. Now here's the, here's the little deal that gets
installed on the wall. That's it. And there's not much room for error on other ones. This,
the little hole has a little, uh, oval hole to where you can kind of tilt it a little bit.
This has to be installed just right. When I first started looking at this, I thought,
what the heck is going on with this? That's why you got to read the directions.
Because once you put it in and screw it up against the wall and there's an actual up,
see right there, it says up, there's an actual up to it and you fit it down on the bottom.
And then you, you push up on it. And as you're pushing up this spring loaded deal right here,
pushes up just a little, see like that. It gives you just enough to raise this as you're, as you,
you hook it on the bottom first and then you lift up on it, you know, kind of, kind of, uh,
a little bit of tension on it and you push it up just high enough to allow the, the top
to fit over that. And then it just pops down and it's spring loaded. And if you ever want to
loosen it up, you lift up on it, lift it out and it comes off. It's actually quite slick,
you know, I've never seen this kind before. And I like the fact they give you the little plastic
screw in type nowadays. That's if you don't, if you don't hit any stud, wall studs and they give
you, and they give you a couple screws, you know, four screws. But in this case, I'm going to,
I've got my inch and a quarter drywall, uh, coarse threaded screws. And do you know that they,
that they fit, they fit right in here, no different. And I like to do that because
I like to save screws like this anytime I can for finished work or, you know, something else
that is going to be exposed something other than a drywall screw. Let's say, okay,
see how it's got the coarse threads on it. I like to use a coarse thread. They have fine,
fine threads too, but coarse threads work just fine. And, you know, these are almost the same
length and I could use inch and five eighths if I wanted. And I got some inch and five eighths too.
And so I may just save these and use them some other time. Okay. And so now what I have to do
is, you know, if you want to make sure you read the direction step-by-step and it gives you all
the different things, one, one through seven through eight, and it gives you all the directions
you need. It also gives it to you in three different languages, I think. Yeah, that's pretty
cool. Okay. So the first thing I'm going to do is I've got to get ready for this template. So I just
cut the template out and I'm going to take my, my tin snaps and cut that. Then I might just leave
it. I might just leave it like that. You know, now, now I can take that and I can hang it up
on the wall, can't I? And what I may do is I could, I could cut this off, but this is going to help me
keep it straight. You know what I mean? And so remember she, she wanted me to have this mark
right there to be the center of it. So what I'm going to end up doing is I'm going to, I'm going
to on here, uh, read seven and 17, 30 seconds. I mean, my word, look how, look how tight they get
to the measurement. It's almost seven and a half. Okay. So I can take my tape measure
and I can put a mark at, you know, half a seven and a half, three and a half is seven and three
eights, four by six, seven eights, three and seven eights is right there. And to check that
you can, you can go this way. Oh, look at that. That's not right. Come on. What's half a seven
and a half, three, three and a half. And my mind's going blank here. Um, a half. So that's
three and three quarters. Is that right? Three and three quarters I think is there. Yeah. Almost,
almost three and three quarters. Okay. So that's going to be about my center, my center line.
And then I'll measure over from that to, to figure out how to get those marks up there
where she wants them.
