Do You Know How PRESSURE COOKERS Are Made in Factories??😱😱 Most Amazing Process👌🏻👌🏻

The use of a pressure cooker had reduced the time required for cooking. So that we can accomplish hours of work in just minutes. And today, there won't be any kitchen without a pressure cooker. You must have definitely eaten the food prepared in this. If not, you'll definitely enjoy the video till the very end, guys. First, get a round-shaped steel sheet for making the pressure cooker. They are inserted inside the hydraulic machine. After placing this sheet on the machine, the machine is turned on. And in this machine, it is stirred using a hydraulic press. So, from this pressure of the machine, this steel sheet of mine Take the Hundi from Machep. And this hundi, as Laink said earlier, r this hundi to be sold for a price, Shinsaf, for this narrative, the bureau keeps moving forward. And there are edges on the cooker. Crumpled. Sing on the next one, just keep going Those who are in trouble, they are the ones who suffer. They keep spinning round and round, endlessly. And scratching and scraping along their edges It is completely separated. When this horn comes out from this machine Ovadh Mirsh is the modern lesson of the shores. And has completely forgotten the task of scratching. From here, the next machine takes the yarn to the loom, where the weft is inserted. Every cooker I have, the machine's literature Four sides are drawn from the center. Later, the cocker's handle is fitted into these grooves. After teasing, it's time to stroke it. Ria must definitely go to Gisai because the shine of Koker's charm was something special. She comes straight from Gisae. Let's take a look at this pressure cooker from every angle. That Isaraj is the next one, a Jisan Dhaata. And wherever one looks, Giza is being seen. There, succipes will sparkle. So, I will care for you in every way, from every side. But the inner wear remains in them, which will be sent for. On the next machine, after it has been fitted there The machine will be turned on. In this machine, these will be continuously applied. It will keep spinning round and round, and inside it, just by hand Therefore, insulators will now be installed above this point. So that the handle gets hot today, but when you grip the handle So that the handle does not feel hot, after installing the handle in the cooker Now comes the step of attaching the handle to the cooker's lid. It is also prepared by pulling the page. And then, the one whose cooker had been prepared They thoroughly clean it from both the outside and inside. If Saab comes out okay It is being sent from here to Agra via Baz. Then for Packyan Wherever it is packed and sent out education ails I liked the video We will play this with our friends now.