This is one of those "I thought this would be a quick and easy" flip, but nooooo. Haha! I ended up trying out three colors before settling on a fourth custom-blended color for the base, and I refinished the top and left it woodgrain.
I didn't like the dated pulls on the cabinet's lower doors, so I opted to remove them, fill the holes, and install magnetic latches instead, which you push to close or open. Perfectly easy to use, and takes away some of the "busyness" happening on the doors.
Even though my initial plan for this piece (light woodgrain top/top drawers, with a muted painted base) didn't happen, I do love how this turned out. There were so many scratches, I wasn't even sure if I could leave the top wood initially, but I got the majority out and it looks great again. ❤️
AI Generated·May contain errors
Video Summary
AI Generated
Angie restores a vintage hutch bottom, transforming a damaged piece into a modern two-tone furniture item. The process involves deep cleaning, stripping old finishes, custom paint mixing, and hardware upgrades to achieve a professional, polished look that balances natural wood grain with contemporary aesthetics.
Well, another week, another video. In today's video I'm going to be working with this vintage
hutch bottom. So there is a top that goes with this. I'm going to be doing something different
with that down the road. Today I'm focusing on this extremely scratched top and what appears to
be not the original finish. It looks to me like someone tried to sort of faux refinish this in
the past by putting like a gel stain over top, probably trying to camouflage some of the scratches
and it didn't work so well. It doesn't look that great. You can actually see here pretty clearly
the discoloration from the stain they put on top, how it sort of gathered in the corners here. I
thought this was going to be a fairly quick flip. It wasn't. I ended up trying out four different
colors on this piece before I was happy with it. So stay tuned. My name is Angie and I refinish
furniture. Sometimes I paint and sometimes I don't, but I always do what I can to save old
pieces from the trash. Welcome to my workroom. So this is the hutch top that goes with the piece
that I'm working on. I don't always split up these two piece units, but in this particular case,
I believe the bookcase that goes on top, I can actually turn into something that is freestanding
so it can be its own piece of furniture. And then the base will sell probably as a media stand or
some extra storage in a dining room. She's a little dusty and has some cobwebs, so I'm just
giving this a quick vacuum on the outside before I really get into it, making sure to get the back
as well. I find these unfinished wood backs are prime for collecting dust and cobwebs.
So flipping this upright, normally I would never suggest rocking a piece of furniture on its legs
like I just did here. In this case, the back legs are actually part of the frame, so I had no worries
about damaging the legs. But it's something I see all the time, especially in mid-century furniture
with the tapered legs that screw in. Never rock your furniture on its legs. Pick it straight up
and put it straight down. The drawers on this piece are actually quite well made. They're all wood.
This one has these little dividers and a felt pad, which I'm going to have to vacuum and clean up a
bit. You'll see that in a little bit. The hardware on the drawers I don't mind, and I think I'm going
to keep them. I'm not sure about these ones down here. I find the lower pulls a little bit dated,
and I have a plan to deal with those. So I'm removing the lower hardware. The outside bit
just unscrews, but this little plate underneath is nailed in. So I'm using this super handy gadget
that was actually the first thing I ever received from Amazon Wishlist. And I'm sorry if I'm
pronouncing your name wrong, but is it Emmer? I think it's Emmer from Ireland was the one who
sent those to me. So thank you so much. I finally get to use it, and I'm sure I'll use it many times
down the road. This piece was quite dusty inside and out. So before I even start, I'm just giving
it a quick little vacuum. I'll have to do this all again after stripping and sanding, but I'm
just one of those people. I like to clean as I go. I'm also giving this a cleaning with some TSP,
which is my favorite cleaner and degreaser. And then I can get on with the stripping and tell you
my plan for this piece. I'm going to be trying to salvage what I can of this top. So I'm using
Circa 1850, which is my favorite stripping agent. There are so many deep gouges and dings, I don't
even know if I'm going to be able to get these all out. At this point, the finish is so dark, I can't
really even tell if I'm dealing with solid wood or a veneered top. I can't really tell. Once I get
this finish off, I'll know a lot more in that sense. You can see I'm adding stripper to this
little section below the top. I'm actually going to be leaving all of that, as well as the top
three drawers wood, and I'm going to be painting everything below that. I really do love a two-tone
look where you've got wood on one part of a piece and paint on another. I think this is the perfect
candidate for exactly that treatment. So in a few seconds here, you're actually going to see an arm
that is clearly not mine. It is a lot smaller and has no tattoos. This is actually Andrea. She is
going to be stripping this for the first time. She walked in, I was just about to start stripping
this top, and she said, can I try? So I know there's a lot of you that are a little bit afraid
of trying stripper, so I thought I would show you someone else's very first time doing it.
So this is her very first pass. You can see it's roughly the angle it needs to be. Maybe it could
be a little bit more of an angle. And then this is my hand, and I'm showing her how I use my front
two fingers to add a little bit of downward pressure. Not too much, because you don't want
to gouge, but that little extra pressure, as you can see, takes off so much more. So now she's
trying again using that technique I just showed her, and you can see it comes off so much better.
So this next little bit is Andrea helping me out. If it's your first time trying it, normally I
would recommend a wood scraper or even a plastic one. This is a metal one, which I find more
efficient once you get the hang of it, but it might be a good idea to start off with something
that's a little bit gentler in case you do end up sort of gouging your wood. I'm just using a stiff
nylon bristle brush and a super fine steel wool to try to get the rest of this stripper residue
off the trim. Now this piece is actually another piece I got from my Amazon wishlist. This one was
donated by Joe Martin. This is one that I wanted to try for a while. I do have a couple other scrapers.
None of them have this handy little, well, literal handle to give you a little bit more control.
I was having a hard time getting some of the finish off, even with the stripper and the scrubbing pad,
so I decided to give this one a try. Everything is dry now. I'm not putting this through
wet stripper, but you can see it is doing a really good job of taking off some of that
super, super dry and thick finish. Mr. Dewalt is happy to get to work on this top. I'm starting
off with a 150 grit sand pad. I didn't really want to go much coarser. A 150 should get out
a fair bit of these scratches, and I'll try to get more out as I move up in my grits.
Now, I'm not sure how well this is going to show up on camera. In person, it's quite obvious where
that top over there used to sit on top of the hutch here. You can see this line to the left
of this line is a little bit lighter and to the right is a little bit sort of yellower,
and that is from years and years of having that top sitting on there and the wood underneath not
aging like the wood out from underneath, if that makes sense.
Because I'm going to be staining the top dark, I'm not too worried about the colour difference
there. If I was doing something a little bit lighter or leaving it natural, I'd probably
consider doing an oxalic acid wash on the top just to try to get those two wood tones to be
a little bit closer. So here's where I'm at after sanding. You can see that the majority
of the scratches have come out. There are still a few here and there.
The ones on the far left side, they look like gouges, but they're really just...
it's almost stained that way. It's hard to explain. It's like the gouges were probably
scratched into the original surface, and then when the person added their gel stain or whatever they
did on the top, it sunk into those scratches and kind of stained the wood underneath.
I don't know how to explain it. I'm hoping that this dark gel stain is going to help cover those.
I'm using a General Finishes gel stain. They are my favourite gel stains to use.
This particular colour is called Java. The lighting's not great here. I know
it's a little bit hard to see the colour, but it's a beautiful, rich, dark colour.
Once I have the top done and the sides, I'm going to move on to the lower portion
where I'm just scuff sanding. Everything below that first strip of drawers is going to be painted,
so I just need to rough up the surface just a little bit. I believe I'm using a 180 grit sand
pad here, and even though I'm not staining, I'm going to be painting, I always try at least to
sand, scuff sand in the direction of the grain, and then just using a tack cloth to wipe off any
dust before I start painting. So my initial plan for this piece was to try out this new
Fusion Colour Blue Pine with a natural wood top. There were too many gouges and scratches on the
wood top. I wouldn't have been able to do a good job of leaving it natural, so I did the top dark,
but I still thought I would go ahead and try the Blue Pine on the bottom. I wasn't sure how it was
going to look, but it looked quite lovely here going on. Let me tell you a little something
about Blue Pine that I learned in this project. This is a very beautiful colour. The lighting
right now is such it is almost sunset, so you know when you get that strong warm glow from the sun?
My garage door is just to the left there. It's kind of giving me a false look at this colour.
This colour dries a lot darker, a lot bluer, and I could not believe my eyes when I opened up
the garage the next morning to this. I was not expecting this colour.
This is no YouTube movie magic. This is literally the colour I woke up to.
So at this point, I'm not loving it. I'm looking now either Bellwood, which is this lighter green,
or going with maybe Bayberry, which would give it kind of a warm, rich, classic look. I can't
decide, so what I opted to do was paint one side in this colour, paint the other side in Bayberry,
and see which one I like the best, because I wasn't loving the Blue Pine.
It's not that it was terrible, it's just I found it a little bit too cool a colour for the top.
This is my first time using their new colour, Bellwood, as well, and I am really liking it.
It might be a tad too light at this point, I'm thinking, but I'm going to finish this
one side, let it dry, and move over to the Bayberry side, and then compare.
This is obviously dramatically different than the other side. This is more of a
sort of classic, warm, rich tone. I'm really confused at this point, because I kind of like
both. So this is the side with the Bayberry, coming over here, this is the side with the
Bellwood. It's not entirely dry yet, but I can get an idea of what it's going to look like.
And after chatting with Andrea for a bit, it was actually her that suggested maybe I combine the
two, and see if I can get sort of a happy medium. So that's what this colour here is.
This is technically the fourth colour to go on this piece. That was the winner for me.
While the first coat of the new colour of paint is drying, and I'm sorry I don't know exactly the
ratio I used, I just sort of mixed it on the fly. But while that is drying, I'm going to start
sealing this wood. I'm using Minwax Polycrylic. Nice, smooth, even strokes, not a lot of downward
pressure. The common complaint about polycrylic is bubbles in the finish when using a foam brush,
and the reason that's happening is too much pressure. So I literally just very lightly drag
it along, and that seems to do the trick. I'm reusing this original felt pad, but there are
a lot of areas that have pilling. So I'm using this little depiller, it's like a fabric depiller,
and just run it over the surface, and this little blade inside just trims those pieces,
so it'll make it look a lot neater. It's not going to make it perfect, but it's definitely
going to clean this up a little bit and make it look less old. The wood dividers that go inside
this lined drawer were a little bit banged up from years of having silverware and utensils thrown in
there, so I'm just giving it a super light sanding, and then I'm going to be sealing all of it with
Wise Owl Furniture Self in the scent Lemon Verbena, my favorite smell,
and this is just going to help nourish and seal the wood and just give the nicest slightest scent
to it. This drawer had a lot of pencil marks and scuffs, so I opted to give that a quick hand
sand before treating this with the Lemon Verbena Wise Owl as well. I'm ready now to do my last
coat of paint. I'm opening this awesome package of paint brushes that was a gift from Chelsea M
from my Amazon wishlist. Thank you, Chelsea. That was awesome. I've used these brushes before.
They're a great alternative to some of the more pricey, you know, specialty paint brushes. I
really like them. The bristles are nice and soft, and this kit is relatively inexpensive
and gives you a variety of different brushes. As I mentioned in the beginning, I wasn't sure
about reusing this hardware. I find it's definitely a dated look and kind of makes it a little bit
cluttered. There's already enough going on down there with the fancy trim on the drawers.
So I bought these little guys. These are magnetic push latches, and it just sits inside,
and through the touch of a finger by pushing on the door, you can open and close it without the
need of an actual little external pull. So removing the old magnetic latches, I'm going
to put up the new ones, then patch the holes from the old hardware. This is definitely something I
should have done before I painted, but it was kind of a last-minute decision to to go forward
with this. So I'm just patching over top. I haven't sealed the paint yet. It's no big deal. I'm just
going to sand this flush when it's dry, add a quick little spray of some top coat sealer, and
then repaint, and I'm good to go. Once all of the paint is completely dry, I'm going to go into some
Fusion beeswax hemp oil combo and just seal that paint. This project ended up taking me about three
days. Not literally working all day every day, but it was spread out over three days, so way longer
than I expected. I opted to use a little bit of gold glaze to just sort of change the color of
the hinges because they just weren't quite right, and I also added a tiny bit extra to
the knobs just to give them a slightly more dynamic look. Now that I'm at the end, looking
back, in all honesty, any of those paint colors would have looked okay and worked with this piece,
but I'm very happy that I went with a mixture that I went with. I'm glad I was able to preserve some
of the wood grain. It would have been a huge pain in the butt to redo this entire piece, and I do
like a paint wood mixture, so I'm really happy with how this piece turned out. Thank you again
so much for watching my videos. Let's see what this piece looks like now.