(DIY GREENHOUSE) How We Made Our Own Inexpensive Hoop House

Architectural Course
8 followers
AI Generated·May contain errors
Video Summary
AI GeneratedJosh from Homesteading Family demonstrates how to build a low-cost, DIY hoop house to extend the growing season in cold climates. By utilizing a pre-existing bean tunnel structure and specific greenhouse plastics, gardeners can warm the soil early to successfully grow heat-loving crops like tomatoes, peppers, and cucumbers.
Hey, I've got quite a problem.
In our short growing season,
the snow stays on the ground for a long time
and the soil really takes a long time to warm up.
And I need a low cost solution to get my soil warmed up
and get a space all prepped for growing things
like tomatoes and peppers and cucumbers
where we're actually able to get a good yield
by the end of our short season.
Hey, I'm Josh with Homesteading Family.
And today I'm gonna show you
how to make a low cost DIY hoop house for your property,
any size you want, or at least any length you want,
in order to help you get a little season extension,
especially if you're in a cold environment.
All right, so the first part of this hoop house
we've already got in place.
And this is what I'm calling the bean tunnel.
And I've got a video on a DIY bean tunnel
where you can check out how to make this system right here.
And this is gonna be the structure for our hoop house.
So at the end of this video,
make sure and go check out that one
so that you can get to this point.
And real quick, just so you know,
this one is 60 plus feet long, about 66 feet long.
You can make this anything you want
sized to your property as far as a bean tunnel
and a hoop house.
It can be as short as four feet
all the way to a hundred feet, whatever works for you.
Okay, so after you've got your frame built,
you're gonna need some good greenhouse
or hoop house plastic
like we've got right here on the ground.
This is our second season for this one.
What you wanna make sure though,
is that it is rated for greenhouse or hoop house.
You don't wanna just go buy your basic six mil
or eight mil plastic from the hardware store.
That is not gonna work.
It's gonna fall apart on you.
So you want something that's sturdy
and that is gonna last you many years.
So make sure you get that,
this type of plastic that's made for a hoop house,
i.e. greenhouse.
Okay, so first thing we wanna do
is we've gotta get this rolled out.
This is a big one.
This is a pretty good project
just to get it over because of the size.
And so we're gonna go ahead and get this plastic rolled out.
Connor, you wanna help me out?
Okay, so this, depending on what size you're doing,
if it's a short one, this is gonna be pretty easy.
On this one, it's gonna be kind of challenging
and I even feel the breeze coming up.
So this might get a little interesting.
All right, so for this length,
this is gonna work a lot better.
Connor's down there helping.
Get it over.
So I think at this point, Connor,
you can probably go on the outside.
66 feet of plastic.
It's a little bit to manage, okay?
All right, now we wanna try to get it even on the sides.
It's supposed to hang over a little bit on the ground there.
Okay, so we've gotta get this just even
because we've gotta cut just to the length
that we're gonna be able to clip it on.
So Connor, you wanna go down and make sure
the other side, the length is good?
Look at this, we're 80% there already.
That was the hard part.
How are we doing on length down there?
Okay, all right.
So we've got two things to do.
We've gotta put the ends on this,
which is gonna hold this together.
And then we've gotta weigh down the sides.
So I'm gonna start with the ends.
Okay, so, you know, we bought this long enough
to cut out a couple doors.
These are really basic, really simple.
I went as inexpensive as I could.
And we've got these clips.
Now, I got these at the local hardware store.
You can look, you know, at your hardware store.
There's all kinds of different tarp clips is all this is.
And there's a bunch of different styles.
Just check your hardware store, local hardware store.
If you can't find it there,
you'll be able to find something on Amazon.
And these are just gonna help hold the plastic
on to the frame here.
Okay, Connor, will you come over and hold this side?
We wanna try to get this hanging,
no, no, this side over here, fairly evenly.
And we'll put a couple to get it in place.
We just want everything lined up here.
And we wanna try to get our seam lined up.
Okay, and these just ratchet down
and hold everything together.
So we're temporarying this up
and we're gonna go ahead and get this clipped up
and we'll show you more of the process on the next side.
All right, so we've just about got the second door up.
And you know, this is the really low cost budget way,
just getting some extra plastic,
cutting it and letting it hang.
Now it doesn't seal off quite as well like this.
It seals it off pretty good.
And I'll bet you there's at least 10 degrees difference
and we just barely got the sealed off.
It's gonna be 20 degrees or more in a few minutes.
But if you wanted to take it a step further
and actually make an enclosed greenhouse
and you could build a frame here
and build a door to walk in and out of,
that would give you an extra layer
kind of protection and helping to keep
that solar gain inside if you wanted to go to that length.
All right, okay, real quick
before I walk away from the doors,
we did need a little weight on this plastic.
And this is just some hoop house framing.
I don't even know what these things are called,
but they've got a little wire in there
that we tucked the plastic into.
This is made to hold plastic to a hoop house,
but they work great just for a little bit of weight
to hold these doors into place and very low cost.
Okay, so we've got the main body of the plastic on.
We've got our door ends on.
Now we need to deal with these long sides.
And there's two ways you could go about this.
One, you could just tack this to the wood frame
if you wanted to leave it closed all season.
But even in our environment here,
it warms up enough in the summer
that we need to be able to give this thing some ventilation,
especially for those tomatoes.
They don't wanna get too humid in there
because they're always susceptible to fungus problems.
So we need to be able to ventilate this.
And in trying to figure this out,
and what was the best way to do this,
since this isn't a technical hoop house
that's got bars that you can roll up
and all that fancy stuff,
we needed something that was flexible.
And what I came up with is water hose.
Last year, I just put an empty hose in here
and rolled it up in the plastic.
And that worked pretty well,
but it wasn't really heavy enough when the wind came up
and it was still blowing things around.
So this year, we're taking some newer hose.
You can certainly recycle hose if you've got it,
and that's great.
But all my other hose is heavy duty.
I wanted something that wasn't real expensive.
I bought just a very lightweight hose,
but I can fill this up with water
once things start to warm up a little bit.
And it's gonna give us not only flexibility,
but a little bit of weight.
That way, when we want this down,
it'll hold the plastic down,
but the hose will be flexible if we wanna lift it up
and create some ventilation.
And I'll show you how that part works
after we get this set up.
For now, we've got to get the hose set up
and attached to the plastic.
Okay, so what I did last year was to roll the hose up,
and I used some of the greenhouse tape
to hold this all together.
And this stuff is made for fixing holes
in the greenhouse plastic.
It did okay.
It didn't hold up real well.
The stuff gets dirty, it gets wet.
And so this year, we're gonna try some Gorilla Tape
and see how it holds up.
Okay.
Okay, so we've got our hose in on this side,
and you can see we've got a little extra hose
because I just had to buy it to length.
This Gorilla Tape seems to be holding pretty good.
We'll see how it works,
but I think it's gonna be a lot better
than the greenhouse tape.
And we put it on about every four feet,
and that should work pretty well.
Okay, we need to trim this hose down.
I'm gonna go ahead and cut it off.
And I've just got the end of a hose here
to deal with this, and a cap.
Because remember, later,
we're gonna fill this up with water.
I don't want to do it now just because of the freezing.
And you may, nope, we're warm enough here.
We're soft enough.
Okay, I didn't have to heat this up.
Sometimes if it's really cold,
you've got to heat your hose up with a lighter
or a little butane torch.
And then we just want to clamp this on.
Now, this is not gonna have high pressure in it.
It does not have to be anything fancy.
We're just trying to hold a little water in here
to give the hose some weight
and help hold everything down.
So that'll be good.
And that is ready to go once we put water in it.
On to the other side.
So the really cool part about this
is the hose is holding it down,
but the hose has also got flexibility.
So when we want to come and vent it,
we can pull it up.
And I've got some clips right here to just hang this in.
We can do this all along the greenhouse.
And we've got some venting in the summertime.
I won't have to do this for several months.
And all these clips are right here are just T-post clips
that I've hung off of these panels.
And this is gonna hold it up.
So that's how you're gonna vent this.
But for now, we're gonna go ahead and leave it down.
All right, you guys,
it is already at least 10 to 15 degrees warmer in here.
That snow is gonna melt now in the next day or so.
Things are gonna start heating up.
Don't forget to go and check out the DIY Bean Tunnel video
to get the first part on how to do this.
And you're good to go.
