No cooling.

All right we've got one that's um set on 73 and it's 78 inside. As you can see nothing's running. Air handler's running but this isn't. Contactor's pulled in. You see that? It might explain why nothing's working. Let me check for power real quick. We got power. These disconnects. I'll try to show a clip from another video earlier today where one of these just a light that got me shot. you see this that's my wire for my condenser fan motor this one should go to my contact it's going to be firm let's pull this out and see if it's in good 55 let's see what this is no sense in having two capacitors if we don't need it it's a five this is a 55 five i think i'm gonna go ahead and replace this because you see how that's i've been oxidized because i got hot just replace it a white one with the white stripe goes to c which stands for common there's also wire that goes to the contactor plain brown one goes to fan and this blue one's going to go to herm and this is now a capacitor is always between start and run Never forget that Although this says C on it that's actually your run winding and this is start for your compressor it goes to Herm and this is start for your fan so this is my run winding that's going to go with my yellow from my contactor on seat Compressor did not start the out on thermal overload just a second before i break out a water hose my compressor got hot actually gonna try a trick i learned from somebody else it's out on overload i should not have continuity between these two that's my compressor leads Nothing so all right we'll hook one up to this one out to this Well it just closed so we don't have to do this to get cool