This Triple Painted Disaster Shocked Me

Trash To Treasure
3 followers
#FurnitureRestoration #Upcycling #TrashToTreasure #Woodworking #FurnitureFlip #DIYProjects #BeforeAndAfter #RefinishingFurniture #HomeDecor #VintageRestoration
AI Generated·May contain errors
Hello beautiful people
and welcome to my first project in the new workshop.
To start it off I'm going to work on this gem
that someone has painted multiple times.
I don't actually know what it
is but the drawers look like there's some sort of plastic film on
them. Perhaps it's oil-based stain that someone painted
with a brush over already painted drawers.
So that's gonna be interesting.
I'll show you what I meant. See how thick it is.
I think it's some sort of stain because you can see it here.
There is white, yellow and like
grayish green. Wow! Let's get to it.
I haven't figured out how I'm gonna work in this workshop
because I'm... obviously this is a brand new space
and I haven't actually done a project here.
It's more narrow so yeah we'll see how that goes.
Oh there is blue as well. I don't know
if there was blue on the drawers but the doors are blue.
And they were also yellow and white.
Let's see what's underneath.
This is a low quality piece and
there's some sort of pine boards inside,
possibly some sort of chipboard and veneer. So I don't have
much hope for what's underneath.
I might need to replace the veneer but let's see. I want to see
if I can take the legs off because it will
be much easier to clean them. That's a bit unusual.
Surprisingly easy and that worries me a lot
because with pieces like this things don't normally go smoothly.
Looking at the back I can kind of guess when this was made
because this looks like the finish that
I think was popular in the 50s
and I absolutely hate this because it's difficult to remove it.
So this definitely needs to go.
You know how I feel about flat head screws, right?
This is exactly why.
I'm definitely not reusing
these so they're going to tip in.
I was just looking at these decorative bits
and I thought this was carved in wood originally,
but this actually looks like it's metal.
Looks like it's brass, or at least plated.
I think this is plated.
I'll clean it up. Might be nice.
And we've got another color underneath.
All right, I'm gonna see if I can scrape
this, because that's a lot of paint.
Yeah, I think scraping will be the easiest.
Let's see how many colors there are.
I don't know.
Doing the first project in my new space was quite interesting
because I was still trying to figure
out how to work, how to film
and I couldn't quite remember where I put some stuff so
it was interesting but I enjoyed it
and I think I'm going to like this workshop.
I definitely did not expect
this grain. I thought it was going
to be oak because it's just
the most common one. So this is actually quite nice grain.
It's actually in nice condition.
I don't like the fact that... I think this is beech.
But we'll see. So I might be actually able to save this.
I mean given the rest of the veneer is okay but
yeah the paint was very old and flaky
so it actually has the best kind for scraping.
Hello beautiful people! It's another lovely day.
I've got my professional trousers on
and I'm ready to do some more work.
I was pretty surprised about this veneer.
I thought it was going to be pretty basic oak veneer, because
that's what I see in pieces like this.
So let's do the other side and get to the doors.
I thought I would need to veneer this,
so hopefully I'll be able to actually save this.
So far so good.
Both sides look
actually okay
and there's
no damage under
the paint.
I think there might be some on the top and possibly on the doors,
so we'll see how that goes, but
Surprisingly the paint is actually coming off really easily
because it's old and very flaky
and because there are so many layers I think that's why it just isn't
attached properly because whoever painted it probably didn't sand
in between. I like that.
Before I do any more scraping I need to check up on Mando.
As you know he was missing for a bit so
I actually got a bunch of cameras that can detect pets
and all sorts of other things to
make sure he's safe and I can keep my eye on him.
And I think there's only one more piece
missing to complete my setup.
New Place has this old crappy doorbell that someone painted white so
I definitely need to change it.
I'm going with a brand that I'm very familiar with. This is
This is a video doorbell from Anker Eufy and it's called S4.
You know I moved recently,
I got rid of all of these cameras because I was tired
of paying for the subscription.
After I moved to my new house I bought a
bunch of Eufy cameras with my own money
so when Eufy reached out and wanted to
send the doorbell it was an easy yes.
I have a mix of cameras that are mains powered
or solar powered with built-in batteries so the
doorbell fits right into the whole setup
and connects with the rest of them. The S4 doorbell
is super easy to install
but because of the wall was in the way I actually moved it to the other
side of the door and I didn't use the wire,
I use this adapter from Amazon so this is a
simple solution if you don't have an old doorbell that you can use.
Of course it comes with a wi-fi chip that's super easy to connect
and it comes with a bunch
of melodies including seasonal ones. Once you set it up,
which is super easy to do,
there's a bunch of features and some of them are really cool.
Because this Eufy S4 doorbell comes
with built-in AI it can recognize human faces, it can detect pets
and cars and all sorts of other things.
So once you tell it which face is yours it will actually
know who you are. Because I get a lot
of packages I really like this feature which allows you to
record your own response
or choose one of these when you're not home. You can choose
your package detection zone and you'll be notified
when the doorbell sees a package.
Unlike many other doorbells,
Eufy S4 covers 180 degrees so you can see everything in full color
even after sunset. This is another really cool feature,
it's called OmniTrack and basically it
allows the doorbell to track,
zoom and rotate the picture to always keep the person centered in the frame
If you open the live stream
and simply shake your phone you can see full
panoramic view by simply rotating your phone
and you can also zoom up to eight times to see all the details
in the VR mode. And this is color night vision compared
to iPhone video taken at
the same time. I really like this feature that the
built-in lights can turn on when someone
is approaching so I can actually see the
keyhole.
And of course the pet detection feature is my absolute favorite
because this way I know when
Mando is waiting outside so I can let him in.
To get this Anker Eufy Video Doorbell S4 or any
other of their products click the link in the description
and thank you to Anker for sponsoring
this video. And now back to scraping
and if you can hear Mando peering it's because he sat on
my lap as I'm doing voiceover.
Just as I expected there are a
few issues but nothing major.
So there is one here. I think I might actually do like a piece of trim
because it will make it look
a bit better I think and it will also cover this missing piece.
So it's really tiny so it will be
easy to fix
but I think I'm
gonna do it anyway.
I've got
the paint off but
before I sand this
I think I'm gonna do the doors and the drawers
and then sand all of it together. Fun fact,
I bought this table on Facebook Marketplace
and it fits perfectly in that space.
I genuinely have no idea what this is but I think
it's gonna be a pain to remove it
and I think I might need to try a stripper.
Funny enough I thought that this was going
to be the most difficult part
and whatever this was actually came off quite easily with the stripper
but I can't say the same thing about the rest of the paint.
Let me know in the comments if you already see the problem.
That actually wasn't as bad as I expected.
So the rest of the cupboards was covered in three
or four different coats of paint and the top one
was pretty easy to remove with the stripper
but the one underneath I don't know if it was some
sort of radiator paint or something that they used in shipping industry
or if it was some sort of
military grade paint. I mean I have never seen anything like
that which you will see in a little bit
Like I said the blue one was super easy to remove
and it was actually quite satisfying.
Well the stripper only works on the blue coat
and whatever is underneath
it's not even touching it so I'm going to try it and scrape this one.
By the way I made this table
or whatever you want to call this just so I don't damage and dirty
the other countertops because I want them to be clean
and nice for as long as possible.
And this is also very convenient
because I can put it anywhere along the length of those two benches.
I think part of the reason why
this is pretty easy to scrape is because all
these paints are different
so I think they just don't adhere to each other very well.
Looks like the doors are in a good condition as well
so I think I can save the whole thing.
All right,
ready for
some sanding.
Very happy
with the
doors.
As you can see
the grain
actually
looks lovely and it's cleaned up very nicely
so I hope I can do the same thing with the drawers
because if I can I'll properly restore it.
I genuinely have no idea what these are.
I think these are just deep scratches that someone made
but I mean I don't know why.
And there is stain that's sitting in them.
I think it's gonna be very difficult to save this
because the veneer is thin.
This is really disappointing because it seems like
it's just the drawers that someone did it on and I don't know why.
It honestly looks like
someone scratched the fronts with a wire brush
or something. i mean this is just
ridiculous because there's just
so many of these scratches and they're really deep.
And as you can see I've been able to remove most of them.
But what I'm really worried about
is that like I'm borderline through the veneer. It's basically
a couple seconds too long in one spot
and I'll just burn through the veneer.
So I've got three drawers
and I might actually spend a lot of time working on two of them
and burn through the veneer on the third one
because one of the scratches is really deep. So
That is really unfortunate but I mean I'll give it a go.
But I feel like I've sanded off a lot of
this veneer. I haven't burned through it yet
but I imagine it's very thin and there's not much of it
left. So when I apply the finish or stain it,
it might look a bit odd. So we'll see how it goes.
A few moments later.
This is exactly what I was afraid of.
So in order to remove these scratches you can see that I had to
sand off most of the veneer
so this is almost gone here and this is gone.
I don't know what is the wood underneath
so I'm just going to sand this off and
have a look but yeah I'll need to just
do something different with the drawers.
If it wasn't for the fact that this veneer
is so thin I could probably try heat and steam
to raise the grain a little bit
but I don't know if that would be enough in this case because
I haven't actually looked at the other drawers
but some of the scratches are really deep.
And then of course we have to deal with delamination. I need to be
careful so you know the veneer is actually adhered properly. So
it is what it is. I'll show you how incredibly thin this veneer is.
I hope you can see it here.
So there is hardwood underneath it's just not the same as the veneer
and it's not going to
match the rest of this cupboard
but it will match the carcass because this is the same wood.
So I might actually work with this,
so I won't need to re-veneer this, but
I'll need to have a think. I just need to remove this veneer first.
By the way, for all of you concerned about my health
and the quality of the air in my workshop,
I've got an air scrubber up there, so I have it on when I'm sanding.
The good thing is
that there is hardwood underneath.
The bad thing is that it's not the same as the veneer.
But it actually looks half decent
and assuming that the other fronts are made from one piece
and not multiple little pieces I can probably make it work.
Well this is pretty crazy. So as you can
see this is made from three different pieces, right?
And you know that I've just removed veneer,
right? And you would think that this is the wood
that it's made from but it isn't. This is another veneer
And this is what the drawer front is made from.
The good thing is that this veneer is quite thick.
So this is the veneer.
Because someone put thick veneer on both sides of this front
these dovetails are actually quite attractive. Man this is just insane.
I don't really know what to do at this point.
I mean it doesn't really matter
if this is veneer or solid wood because I can't work with it.
It's quite thick.
The question is, is it going
to be decent looking on the other drawers and
I guess we're about to find out.
Oh wow, looks like this one
is going to be full of surprises.
So I just started sanding off veneer on the second drawer
and this one is made from
completely different wood. Looks like this one is pine.
So there goes my plan. I can't
just sand it off and use whatever is underneath
because it's different on all three drawers.
I mean come on whoever made this literally made this from scrap
and just put veneer on it which
I mean I can understand it but I just need to go
and get some veneer. 85 pounds later. Not only
that's a lot of money they also didn't have the veneer that I needed
so I just got the closest to
what was on the cupboard and I also needed something light
so I could actually stain it and match it
Because the color of the veneer
and the grain on the veneer were different I knew it was going to
be tricky but I also had a vision for this piece
and I felt like it had a lot of potential so
I wanted to see it through. If you are not new
to my channel you have seen me do this
multiple times so I'm not really going to explain it.
I'm basically using contact adhesive and
once you stick two surfaces to each other they're just stuck forever.
Unless of course you use acetone then it's pretty easy to undo it.
All right now that I've
got the drawers done
I can do more sanding
because
this whole thing
still needs to be sanded.
It's pretty cold today but it's actually bearable so I've got the door
open and I don't know if you noticed
but the table that I made for this area I can actually
store it over here
so it's not taking up space.
There is another slightly odd
The thing about this, so there was actually a veneer on this surface,
but not over here or here.
So I've sanded this off, so this entire
corner looks
the same.
Wow, what a project! It surprised me so many times.
Anyhow, as always I just wanted to give a
quick shout out to all of you beautiful people for subscribing,
liking, commenting and hyping,
because that helps a lot.
And as always a special shout out to the channel members,
you guys are the best. If you're feeling generous
and want to support me and Mando,
all the links are in the description.
Thank you! All right,
I sanded the inside because it needed
A refresh. So now I just have the top left
then I need to figure out what I'm going to do with all
the veneer. This veneer is extremely thin
so I'm going to finish this by hand because
it's just really risky.
As far as repairs there
wasn't anything major wrong
with the top but
a couple places there was some veneer missing
so as you can see I basically
Cut out all the rough edges
and I replaced it with a fresh piece of veneer. I also used
a little bit of CA glue to fill in that gap in
the middle and when I was done with the repair
I used a fine tip marker to recreate the grain
so it looked like the rest of the top.
Of course it will need some color correction later
on once I'm done staining.
Because the back piece was quite damaged
and it was delaminating instead of sanding that one
I made brand new one.
Do you remember
when I mentioned
that paint?
I don't know how many
coats of stripper and thinner and acetone
and all sorts of other things I tried.
It literally took forever and believe it
or not this actually isn't the worst part.
Fortunately Mando stopped by the workshop
to cheer me up a little bit because
I really needed a cat break and I think he's over his PTSD
because he started making new friends.
Though in this case I think it might take a minute.
Anyhow he's happy, healthy and
getting fat for the winter which is great
because it just makes him more cuddly.
Now that I've had my dose of mando I can get back to the project.
I put the legs back on and as you can see I clean up those sliders
and make them nice and shiny
because you know I'm a professional.
And once I was done with that I decided
to clean up those metal decorative thingies but
surprisingly my wire brush wouldn't even touch it which was just
really strange but as you remember I mentioned the paint.
And I've never seen anything like it, so watch what I've done.
I started with a stripper which is actually quite good
and it works on most paints.
It did almost nothing, it removed the first coat of paint
but the one underneath didn't even move.
So I tried acetone and then I tried industrial strength thinner.
Both did absolutely nothing, so I decided to
Put my heat gun on high heat and it did absolutely nothing
and at that point I've had it so I decided
to use butane torch which didn't really do anything
and it actually heated up that piece to
the point that it started bending so I had to stop.
Well the word pain is in paint
for a reason. The torch turned it black
and lifted the edges a little bit but it didn't burn it.
I don't know what sort of paint someone used
on this but wow I couldn't even burn it. So I basically
ended up using my dental tool to scoop up all
those little bits before I could actually polish
it. As you can see they look really
really nice but man it took forever.
As I mentioned before
I added the trim to the back of the top
because I actually think it makes it look a bit nicer.
Because of these, which I quite like,
I will need to find some sort of hardware that's silver
so it all matches. I still have these.
I think I've got three sets. I've got enough for the drawers
and I've got these which are a bit different
but I can use them for the doors
and they will clean up and look very similar.
I also have these which I think are a bit more similar.
I don't know, I'll have a think.
But before I do anything I need to pick the stain
and I don't really know what I want. All right, let's do some staining.
I'm really struggling with the color
and I'm thinking about using either Plum Mahogany
or Walnut because obviously whichever
color I use it needs to go with silver.
I kind of think that Plum Mahogany would look better
but I think Plum Mahogany is a bit more
difficult to fit with the rest
of your furniture unless you already have that color scheme because
obviously there's a little bit of purple in it.
So I think I might just go with Walnut on this one.
Believe it or not, there is another surprise to come.
To make the drawers look not brand new I stained them,
sanded them and then stained them again.
You can probably see another problem right here.
I let this dry overnight and there's actually some
frost on the ground this morning
so not ideal for putting on the finish but it is what it is.
I'm going to add a little bit of pigment
to hopefully even out the tone because I added
new veneer so obviously they're not exactly the same.
Because it was cold and the oil was very
thick I added a little bit of mineral spirit
to thin it out. This almost looks like chocolate. I
think this added pigment it makes it a bit more chocolatey brown
and I like it. This abrasive pad
It's going to make the finish silky smooth
and this also helps you avoid any dry patches because
it will rub the oil in properly.
Once you've wiped it off you can touch it. Because I wanted to get
the video out I took the final pictures maybe
an hour after I applied the oil so keep that in mind
because this wasn't even dry yet.
So as you can see the doors
are quite a bit darker than even
Even the sides.
Or the drawers.
Which is unfortunate but that's what happens
when you have different types of wood and veneers so
I think I need to redo the doors.
So there's a surprise and yes it was super annoying but
I couldn't just leave it like that.
I guess I am a professional.
Like I said this was still wet when I took the picture
so I might need to do some tweaking
but we'll see when it's dry.
For now it's looking really cool and I'm very happy with it.
I know that most people go with copper or gold,
so let me know in the comments what you think about the silver.
Don't you like when the project comes together just as you imagined?
I think it's really cool.
I'm very happy with this and despite some setbacks and
issues with the veneer I think it's beautiful.
I don't do silver very often but I really like it.
I hope you enjoyed this project.
Before I show you the final results don't forget to like,
comment, like and subscribe
if you haven't already. It's completely free
And check out the link in the description for the Eufy S4 doorbell.
See you in the next video.
