I picked up this US PeaceKeeper pouch on Amazon Haul for about $4 and figured it was the perfect starting point for my new Budget Build Series. How much everyday utility can you pack into a pouch that cheap?
For this first build, I’m putting together a compact EDC tool kit with 4-inch WORKPRO water pump pliers, Klein flip sockets, a compact Craftsman ratchet, a RovyVon flashlight, and an Oknife pry bar. I’ll walk through what fits, how I laid it out, and what each tool earns its spot doing.
What would you put in a $4 EDC pouch? Let me know what you’d swap or add.
We are back with another review
and today we are checking out the U.S. Peacekeeper pouch
and the kit that I built with it.
So without further ado, let's hop right into this review.
So if you remember, the U.S. Peacekeeper
was a USA brand pouch that I was able to pick up on
Amazon haul and I ended up putting together
a nice little kit with this. It's a taco style pouch,
so it's one of those. We'll unzip it.
I'll show you the scatter pattern. It does have a nice
little tether here, which I left on,
and we'll see what we ended up putting in the little kit here.
First out, straight out the gate,
right down the center here, you can see we have a night
eyes little carabiner,
which allows me to hook it on to the outside of this kit.
We got a little tether there,
and I can hook it on to my belt loop, hook it on to inside
of a backpack, going outside of a backpack,
hook it anywhere, but it's a deployable little
carabiner.
And inside there, I have a little deployable towel,
which you can get this little towel
wet.
It just sits really nice in that little carabiner.
You should pop it out, and then if you don't need it,
I guess you could just kind of pop
Pop it back in there.
I centered it like that so it doesn't slide out of the way,
but it's something you just get wet
and now you have a quality of life instrument.
And that's right down the middle there for easy use.
Let's go left to right and check out all the tools we got here.
In the front, from Robivon, we got the Aura A3,
which is one of my favorite offerings from them,
with the magnet on the bottom for this kit.
Then we have the Markzall Dura-Ink Marker,
which I grabbed the pack of those from Tractor Supply.
So they're actually quite good markers.
So I'm using them for my kits.
Next up from Civivi, I don't remember the knife, but here it is.
I ended up getting this on Whatnot,
so I don't remember the actual name of the knife.
I like the little buck-style tip.
It's kind of got like an acid-washed look,
but I don't think it's acid-washed at all.
But I like the carbon fiber simulated.
My carbon handle there, which is nice.
Next up we got is from Olight, an O-Knife. This is the
pry bar right here with precision drive kit.
We got a little ratcheting system, quarter inch drive
bottle opener, pry bar, precision.
The precisions get put right here, quarter inch standard bits
there. It's just a really nice dedicated bottle opener
and pry bar for this kit.
Next up, we've got Right in the Rain notebook
with our little striker strip here for matches.
We've got some Band-Aids, electrolyte powder back there from Hydromate.
I think that's everything on that side.
Yeah, that's everything on that side.
Then on this side in the front,
we've got a little ratchet from Craftsman.
Again, corners drive, so those teeth.
That's classic Craftsman.
This is an OG ratchet before Craftsman turns into whoever they are
now. But that is an OG one.
I've been carrying that with me for a long time. I don't use it
regularly, but it's been in my toolkits for a long time.
And here it is. Next up we got from
WorkPro is their little four inch kind of water pump style pliers.
Slides pretty good. I mean, the teeth
on it slides pretty good. Better than some of the
generic ones that are out there.
The WorkPro ones seem to kind of hold up. So next up we got is for
our little ratchet there, some sockets.
We got a metric and SAE, a little assortment there of tiny
sockets for our tiny little ratchet. Let's pull out that.
And I think that's the last of it in the
kit. Gonna put that over there.
We have from Bosch some Phillips slotted in Torx.
So we've got some sockets.
We've got some bits.
And then the last thing we've got is this little match box,
which has some cool stuff in there.
Let's check it out.
So we've got some Imodium, some Breathe Right, some matches.
And on this side, we've got some Military Energy gum,
which you know is one of my favorite things
to pack out in my little kits.
Oops, let's get that.
Let's call it there.
And in this little box, I 3D printed.
I can get that little part in there
It wants to fold over on me,
going
but anyway.
to go
This little box I ended up 3D printing.
Thank
ahead
It's just a 3D printed matchbox.
So that's something you can easily find on MakerWorld.
and get
But it worked nice because it's a tiny little catch-all
that slides in here really well.
Let me know what you think of this little kit.
started.
Like I said, I wanted to be inspired
by the pouch itself from US Peacekeeper.
you.
It's a USA Made brand.
And I think I actually was able to fit a nice little kit in here.
Again, it's a taco-sized pouch, so not too big.
Um, it's not micro either,
but you can fit some really useful tools and we got fastening in here.
We got gripage, we got torch, we got cut, we got pry, we got right.
And then we even got a little med kit slash like fire starter kit
in there. So that's pretty cool. And the caffeine. So quality of life.
Oh, towel. Quality of life.
So we've got all the way to the quality of life stage.
We've gone past the basics. So I think that's a win for me.
You let me know down in the comments below
which tools in here would you cherry pick for your kits.
Is it maybe the knife from Civivi,
the pry bar with the precision drives?
Maybe it's the Work Pro, little waterproof pliers,
the 4-inch version for your kit because you don't want to buy the...
The Knipex can half the price of the Knipex.
Thanks.
Let me know down in the comments below.
If you like this video, give it a thumbs up.
Want more content like this, subscribe for more.
Have a nice day.