Why settle for growing one crop at a time when you can harvest an entire meal from a single stem? @jacquesinthegarden puts plant science to the ultimate test by grafting a tomato onto a potato plant to create a real-life "pomato." Follow along as he nurses this hybrid to harvest, and turns the whole thing into homemade ketchup and fries from scratch!
Epic Gardening occasionally links to goods or services offered by vendors to help you find the best products to care for plants. Some of these may be affiliate links, meaning we earn a small commission if items are purchased. As an Amazon Associate, we earn from qualifying purchases. More info on our process: https://www.epicgardening.com/disclai...
AI Generated·May contain errors
If you took a tomato stem just like this
and attached it to a potato,
you've just created a tomtato or ketchup and fries plant.
And while what I just showed you isn't the exact method,
it's not far off.
Thanks to the fact that these two delicious plants
are in the same family,
they could both be legally and literally
bound together as a single plant.
I'm Jacques from Epic Gardening,
and today I'm going to show you
how to pull off this easy and fun graft at home
using no special tools,
what the total harvest looks like,
and of course, I'm going to be cooking up
Some ketchup and fries for the ultimate.
Ultimate one plant meal.
And if you give this video a thumbs up,
I will personally grant you double the yield
on any of your two in one plants.
And now I'll show you the right way
to actually pull this off.
This is all done through the process of grafting.
Now this potato was planted in a five inch pot
to make it a little bit easier to do this whole process
because it just makes it a less challenging thing
to keep this alive rather than grafting
into something outdoor in the elements.
So in this case, this potato was very vigorous.
It shot up three main stems
and we don't want three main stems.
We actually only want a single stem.
So what we need to do here is try to select down
to just one stem and attach this tomato
to one of those stems.
Now, what I'm going to do here is use a razor blade.
This is a brand new box cutting blade.
I'm just kind of looking at these different stems.
What I'm going to do instead of removing them
is we'll just try it on one of them.
If it fails we could move on to the next one
and we basically have three free tries. But what I will
do here is actually trim off some of these lower leaves
because there's just too much of it.
And I don't want this plant to actively be trying
to grow in the process of healing for its graft.
So let's just clean this up a bit
and then we'll get into the actual graft.
So now at this point I've cleaned up the potato plant.
I removed a lot of the branches near the top
and some of these extra leaves.
And now the most important thing is that we need
to find a section of this potato plant
that matches the diameter of this tomato stem.
Now luckily that is going to actually
be really easy in this case because these
tomato or potato stems are not that thick.
So I'm going to start with this one over here.
And I'm going to entirely cut away the leaf node around it first,
just so that we could actually get to the true stem itself.
There are a lot of different ways of grafting.
I think the easiest one is, I think it's called the cleft graft,
where you're just sliding a stem into the other stem.
It's one that I've had the most practice and success with.
So what I'm going to do here is I'm just going to literally cut
straight across the top of this potato plant.
And now the reason I'm using a box cutting blade here
is that these are very sharp and it's also clean.
I just pulled it out of the box so I know it doesn't have any sort of
plant pathogens or anything like that. So now once I've done
that initial cut here, what we're going to do
is this stem right here, I'm going to cut straight down
into. Just a solid cut all the way straight through it
and that's going to set up our grafting site.
And now I'm going to take my tomato
I'm just going to go ahead and preemptively cut the top off.
So what we're doing here is trying to find the stem match,
and actually that's pretty dang good.
Now what I'm going to be doing in this case is shaving this tomato stem
until it's essentially the shape of like a flathead screwdriver.
Got a really nice clean cut on this tomato.
And now the fun part.
What we're going to do is actually, before I do this,
I'm going to cut off this leaf here because it's too heavy.
It's making it awkward.
I'm going to slide this plant.
Right into the second planter. So what we've done here...
is we've created two open surfaces on the plants
and now those membranes are going to fuse together
and form a single stem.
Now what we also want to do here is protect that graft point by
wrapping in something like a plastic.
This is actually like grafting tape. You don't have to
use this you could use a little strip of cling wrap
or something like that whatever you have
in your home kitchen. But the main idea here
is that this is going to help keep this contact
as tight as we can get it while also locking all the moisture in there
And stopping any sort of disease
or any like dust from getting inside the cut.
We don't want this potato plant to push
the tomato stem out of the actual grafting cut site.
So now we've got the tomato cutting attached to our potato,
and this is ready to sit and rest in a humidity dome.
Now I actually don't know if I have one big enough for this.
So what I'm going to do is go grab a plastic bag
and just throw it around this.
I'm gonna keep it in my shed out of direct sunlight
because if it gets too much sunlight,
it could actually start to grow
and it'll push the graft out of the cut itself.
It's officially time to check in
on our tomato potato graft
and things are looking promising.
I think both of them have fully attached.
They're both still alive
and they've put out a little bit of growth.
This one has some flowers,
whereas this one has like doubled or tripled in.
Length and size. I think that's mostly due to the fact
that we have some extra leaves on this guy.
Now both of these are ready to be eased out into the real world.
When I'm doing these graphs,
I like to keep them inside the shed out
of direct sunlight to stop them from getting cooked.
So now what I need to do is essentially
harden them off similar to how you would
do a seedling at home. So I'm going to bring these outside.
I'm going to transplant them directly
into a 15 gallon grow bag with new,
fresh soil. And then I'm going to place
that in the shade for the first,
like three to five days, it's going to be in a hundred percent shade.
And then over the week I'll ease it into full sun. And at that point,
it's going to start growing
and hopefully we'll get a ton of potato and tomato
production. We are at the halfway point. I am so excited.
Because we've got tomatoes, baby.
The tomato-potato or pom-tato is well on its way.
We see food above.
I should be getting tubers down below.
But at this point, I wanna talk a little bit
about some care tips when you're growing
a potato-tomato hybrid sort of grafted plant.
Now, the only thing I will really say is that
make sure you fertilize, make sure you water it,
give it everything a tomato or potato would need.
And the other special tip is to
prune off any of the potato growth
that happens down below.
There's no point in leaving those potato leaves.
They're shaded by the tomato anyway.
They're more prone to disease
and they will likely die back sooner
because that plant is not designed to grow
as long as an indeterminate tomato.
Which brings us to a mistake I made
at the beginning of this experiment,
because when I set this all up,
I started with a Yukon gold potato.
These are determinate potatoes.
Just like tomatoes, potatoes can be indeterminate,
determinate.
The short and simple thing about it
It is determinate potatoes, just set a
single layer of potatoes at one level in the soil,
whereas an indeterminate potato like a russet
will continuously set potatoes as long as it is underground.
So since this is growing
for a much longer time period than a normal Yukon potato,
which is about 60 maybe 80 days,
this will die earlier before it could reach its true
Potential.
So next year I'll probably be grafting
onto indeterminate potatoes like these russets.
I should be able to get more potatoes
and also a longer harvest season for the tomato itself.
But I am still thrilled because it looks healthy.
We will definitely get some tomatoes.
Now it's a question of how many tomatoes
and potatoes will we get?
So here we are with the potato tomato graft.
It's been in the shade now to try to keep the potato roots happy.
And what we're going to do is actually have
the first of the tomato harvest.
I have two harvestable tomatoes on here.
As you can see, they look like regular tomatoes.
They're not potato shaped or anything like that.
And what we're going to do is actually freeze them in this ketchup bag
because what I want to do is make ketchup.
from the fruit above,
fry up the potatoes down below
and eat them together from the same plant.
That is why this potato tomato graft
is also called the tomato
or the French fries and ketchup plant.
And right now we have 13 fruit that are in the green stage.
So hopefully at least some of them will make it.
We could actually get a sizable amount of ketchup
and hopefully down below,
I've got an insane quantity of potatoes
because I really want this to work out.
And I hope that we actually get a pretty good yield in the end.
All right, my friends, I have harvested the tomatoes
from the tomato potato graft,
and we got just under two pounds,
one pound, 15 ounces of tomatoes,
and the plant has now fully died.
So what that means is beneath the soil here,
we should have a decent harvest of potatoes.
The real question is, are we going to get as many
as we did in the tomato world?
We'll get more, we'll get less.
Regardless, I'm going to fry up whatever's in there
and we're going to turn it into ketchup and fries from the same plant.
So I have to say I'm really hoping for a big harvest here
because this is a lot of work to do.
You're getting less tomatoes,
but you're still growing a tomato and potato at the same time.
So I really hope that this is worth the effort.
Now, will it be so worth it that I do it every single year?
Probably not, but I'm curious
to see exactly what we end up getting here.
Okay, okay, so far...
That's promising. Got a nice little potato cluster right here.
Wow, hopefully that's not it.
All right, there's another one. There's a rotten one.
I don't like that. Okay, another regular potato.
This is actually looking really good.
After dumping the bag out in this container
and digging out a little bit more,
I found another potato,
although this one's a little bit too small to use.
I found these two other ones hiding on the side.
So at this point, we now have a decent harvest of potatoes.
This wouldn't be something I'm totally excited about
if this was my total yield of just potatoes,
but we have another bag full of tomatoes.
So let's go ahead and turn this into a delicious recipe
and talk about why this yielded the way it did.
How to change it in the future
and whether this is even worth repeating ever again.
This is actually the first time
I've made ketchup from scratch
and we're gonna start off with some onion and garlic
and we're going to just put all the tomatoes in the pan.
We're gonna let this cook
for about 20 minutes.
Now that we've hit this point in the process,
it is appearing as something like ketchup.
So now what we need to do is just simmer it
until it reaches that desired classic thickness
that we know and love in our ketchup.
Now, meanwhile, I have cut up all of the potatoes
into tiny little French fries,
and they've been soaking in cold water
to pull some of the starch out.
As soon as this is ready, we'll begin frying.
At this point, the ketchup is almost ready.
It's starting to really cling to the utensils.
Soaking the potatoes in water removes some of the starch,
but now we just wanna make sure it's nice and dry
so that when it goes in the oil, it gets properly crispy.
Now it's time to double fry these potatoes
so we can get that nice, crispy exterior.
I weighed them and I got about a pound of potatoes.
So two pounds of tomatoes,
pound of potatoes total from the grafted plant.
Let's see if these could
fry up beautifully.
We got the oil cranked up to about 400 degrees
and now it's time for the second and last frying.
In the end, this shows that you can't double your harvest
by growing two plants at the same time.
It's just like interplanting in the garden.
If you put two things next to each other, they will compete.
And although you have two plants,
you'll never get double the harvest
by putting two plants in the same spot.
There is a simple energy barrier that you will always hit,
whether it's from photosynthesis
or from the roots down below.
I would love to try this again where I grew the tomato,
but I removed every single flower.
And then allowed it to produce as many potatoes as possible.
But for now, let's try this homemade fry
and some of this homemade ketchup.
Honestly, this ketchup is really good.
But overall, I'm extremely pleased with this.
It's really cool that I could grow
and eat tomatoes and potatoes from the same plant
and make my own ketchup and fries.
Before I finish this whole plate of French fries
and ketchup on my own,
I do wanna point out that we have a playlist right here
of a bunch of different gardening experiments.
So good luck in the garden, keep on growing,
and thanks for watching.
That was really good.