In this video Joel here at Artisti Coffee Roasters takes a closer look at the coffee puck and things we can look at to help identify problematic issues within a coffee extraction. Loading a handle to run a beautiful coffee extraction through an espresso machine takes a little bit of care and with some of Joel's advice here you'll be nailing them in no time.
We hope you enjoy the video and if you have any questions please drop them in the comments as we'd sure love to hear them!
Hey guys, Joel from Artistic Coffee Roasters in the espresso bar, back behind the coffee machine again.
Today we're going to be talking about extraction defects and helping you hopefully understand a
little bit more about what's happening during the extraction process to get a better cup of coffee.
So it's fairly accepted in the coffee, well the specialty coffee industry now,
that most people are using what we call brew ratios or brew recipes.
This is kind of something that hopefully standardizes the taste of coffee
between cafes and also helps you get the most out of your cup.
What we're going to look at today is I suppose the next step above that, a more advanced way
of looking at extractions and hopefully work out what's happening inside our extraction
by analyzing our puck afterwards and hopefully using some techniques to get the most out of that.
There's a few things that we need to cover off before we get into it.
Really most coffee machines are really doing the same thing, although there might be small
adjustments, don't get me on the technicalities of that. When we put our coffee into our handle here,
we're going to tamp that nice and flat and level, put it up into our coffee machine.
As soon as we press the button, the coffee machine is going to pump 94 degree water,
93, whatever you've got your coffee machine set at, pressurized water at nine bars onto that bed
of coffee. The big thing to understand is if there's any imperfections in that bed of coffee,
any weak points, that pressurized water will find the least path of resistance.
So if there's a hollow air bubble in your puck when you tamp it, then the water when introduced
to that coffee bed is going to find that. If you've cracked the seal around the outside of
your basket, the coffee will run around the side of your puck and not run evenly through.
The ultimate goal that we're trying to get to is the water to run from the top of the puck
to the bottom consistently the whole way through that coffee. If that's not happening,
you're not going to get the true flavor of the coffee. You're going to over extract parts of
the coffee while under extracting other parts. It's kind of a weird concept when you think about
it, but it can make a huge difference to the taste of your coffee. It'll also help you in
understanding how to best achieve the brew recipes that are given to you as a barista
and maybe avoid some issues that you would have had in the past or may have in the future.
Hopefully you'll learn a bit from today. So today I'm going to demonstrate, I suppose,
poor technique and good technique and show you how that can really affect the cup of coffee and help
you achieve the brew recipe that you're after. The brew recipe that I'm going to be using today
is 22.5 grams of coffee in, which is our dry coffee, 45 grams of extracted yield,
which is our wet coffee underneath, and I'm going to be trying to aim to do that in 36 seconds.
Let's give it a go, I suppose. Get into it.
So I'm just dosing 22.5 grams of coffee, spot on, and I'm not going to distribute this very well.
I'm just going to put it straight into the basket, okay, as is, and use my trusty puck press.
We're in peak service here, we've got no time to muck around, so we're going to get into it.
My coffee machine is pre-set for these buttons to extract 45 grams each time.
Now the coffee's starting to come through. One thing that I'm going to be looking for
in my extraction is to see a nice even colour progression. What that means is starting off dark,
turning to a darker caramel, a lighter caramel, and then blonding, all happening
progressively at the same time. What I don't want to see is that extraction going really,
really light very, very quickly, and also seeing really dark, I suppose, lines coming through.
That's a key indicator that you're getting channeling in your extraction and you're
not getting the most out of the coffee. Okay, so that extraction that we did there,
that was 30 seconds, okay, so it's quite a ways under my goal extraction time of 36 seconds.
Let's have a look at this puck here. Okay, great, it's worked, it's done exactly what I want it to
do. You can see with this puck here that we've got those wormholes or channeling happening.
That's where there's weak points in the bed of the coffee and water has run through very,
very quickly. The other thing that we can see is around the edge here,
the seal is broken between the coffee bed and the edge of the basket. That means that water
has run around the edge of the coffee and not evenly run through. The other thing that I can do
is just use my finger and press on the coffee and I can actually feel that there is inconsistencies
in the density of the coffee. Up here, I've got a big air pocket. When I press on it, it pops back
down very, very quickly. Over here is a really, really dense part of coffee. That means that the
water has been running through one part where it's very weak and not running through another part.
Okay, so that's pour technique. The manual would tell you, right, if I'm not achieving my 36 second
extraction, it's 30 seconds to make my grind finer. Now, that's true to a point, but if we're
getting these, I suppose, defects in our extraction, making the grind finer, although
it will slow the extraction to a point, it's not going to be enough. It's not going to help me too
much. What I'll end up doing is getting more defects in my extraction through having those
tight, fine grind. And the other thing is depending on what grinder you're using, there's a good
chance that you're going to go too fine to try and achieve that goal and possibly block up your
grinder. So the one thing that I'm going to change, I'm not going to change my dose in. I'm
not going to change how fine the grind is. I'm going to change my technique and distribute the
coffee a little bit better. So there's a few different, I suppose, tools that we can use to
help us distribute the coffee a bit better. There's things like the OCD and other products
distribution tools on the market. There's a good old dosing tool. One thing that we do have as
well is the bench that we can use and our finger. So this part of it, I'm doing exactly the same,
same grind, same dose. So again, I'm just going back up to 22.5 grams. When I turn it over,
I'm giving it a big shake. What that's going to do is it's going to break down any boulders or
any clumps that you have in your coffee and make it really nice and airy. The next thing I'm going
to do, tap it on my bench. That will compact the coffee. If there's any weak points in the coffee,
it will collapse any air pockets. The next thing I'm going to do is just use my finger
to evenly distribute the coffee around the basket. Okay, so you can see there,
I've got a nice, smooth, flat, even bed of coffee. Using my pipe press, exactly the same as before,
so it's all controlled. I haven't changed any grind settings, dose settings or temp pressure
or anything like that. It's only been the distribution that's been different.
So again, extracting my 45 grams out as per my recipe. Now let's see what effect this has
actually had on the extraction. You can see that was a more viscous, drippy extraction at the start
and hopefully the progression of the colours through the extraction happen evenly and I'm
not seeing those dark lines through a very light caramel extraction. What you'll also find is the
point of blonding will be pushed later in the extraction and all those particles in
the extraction will extract evenly and more consistent. Okay, great. So we've actually
extracted the same amount of coffee using the same preset button, used the same dose in,
used the same grind particle size, but we've been able to achieve a 38 second extraction
through better distribution. Now, when I pulled my first extraction, remember that was 30 seconds
and my goal was 36 seconds. I haven't changed the grind. Everything in the manual tells you
to change the grind. I've distributed the coffee better and I've been able to increase
the extraction time by eight seconds. Not only have I increased the extraction time,
but I've also improved the way that coffee has extracted. I've got better flavours from the
coffee. I've got a more even progression. There's going to be more complexity, more depth in the
coffee and when we have a look at the puck here, you can see that there is no channeling. There is
no crack between the bed of coffee or the puck and the edge of the basket. And again,
when I'm using my finger, it's nice and evenly, I suppose, dispersed around the basket. It's nice
and soft and consistent with no air pockets in it. So the big takeaway from this today is
grind particle size is definitely a big thing, but good distribution technique can be the difference
between a 30 second extraction and that 36 second or goal extraction that we're after.
It also changes the flavour of the coffee vastly and allows you to get the most out of your coffee.
So next time that you're setting up and dialing in your grinder, take those things into consideration
and look for those grind defects and use a good distribution technique to hopefully
get the most out of your extraction each time. Hope you've enjoyed watching. Please,
if you want to see a video about another subject or something that you're curious about,
if you've got any questions, put them in the comments below. Make sure you subscribe to our
page and we'll see you next time.