Blazer Ceket ve Pantolon Dikimi _ Bershka'nın 260 TLlik Takımını 15TLye Diktim !

Hello I'm Damla Today we're starting a new series The name of this series is "I Saw It I Made Itetc " I will try to make the same clothes that I saw in the stores as the name suggests I will compare the cost of what I made BX with how much it sells for in the store The main reason I started this series was to think about the cost between consuming and producing I went to Bershka recently and immediately noticed a blazer pant suit Because I also had the same fabric as the team's In fact I had shown this in a video It was a 3-meter piece of fabric and I hadn't decided exactly what to do with it I already said when I saw the team maybe I can fix this Because I had never sewn a jacket before This was my first attempt at making a jacket I thought it might be worth a try and I think it turned out nicely Later when I was in the store I tried the set on The dress was really comfortable and very nice But the back of the pants looked too baggy He was showing a lot Also this is my problem but the lower part of my legs is a bit thick The pants legs were a bit tight so they sat right on my wrist And those lines used to look like that Also when I looked at the prices the jacket was 160 TL and the pants were 100 TL My fabric was 3 meters long I didn't use all of it but I bought it for 9 TL Then I bought a lining and two buttons for a jacket I got the whole set for 15 TL and it fits me perfectly I hope you like it as well I am really excited about this series If you like my video don't forget to press the like button and if you want to see more videos don't forget to subscribe to my channel Take good care of yourself I took my jacket patterns from a pair of jeans I drew the bottom part of the front to widen downwards so it could be a dry vase We also made the collar a bit smaller My fabric is thin linen and I also have a lining I lay my fabric in two layers and place my patterns The thing we need to pay attention to is the back body fabric layer I am placing the pattern in this way Because I will draw one side and then fold the other side later I'll draw it again and cut it in one piece so I can get two open sleeves I will do the same thing for the neck that I did for the collar I'm cutting off one centimeter of the seam I am cutting half of the mold of the body to obtain a mold for the frame I transfer this pattern onto my two-layer fabric and cut it out Then I also cut the lining fabric from all the pieces But I don't cut the edge because that will already be two layers Then I place my apron in front of my chest with the faces looking at each other and sew it along the edges I press the curved parts and turn them right side out then sew along the edges again to make a neat seam Because it seemed very unpleasant to me to have a lining I will sew together pieces of my lining fabric and linen fabric and treat them as if they were one fabric I am connecting them by the shoulders so that their faces are looking at each other Then I also needle the sleeve I am threading my arm through the opening at the front and back of the body starting from the middle I showed each step only one side to keep the video from being too long I hope it is clear I am stitching at the places I am pointing out and this is how it looks I remove them and cover them this way and I needle the sides starting from the armpits It looks like this after the dictation Then I pin the edges of my collar pieces so that their faces are facing each other to make the collar I sew the areas I am pointing to with my finger I fold the part I am not sewing 1 cm inward and press it I am sewing the edges but not the bottom part I am pointing out the middle of my sleeve and the middle of my collar I pin the folded edge of my jacket collar so that the faces are looking at each other I sew it again by folding it like this after stitching from here Later I will just make a cover for the pockets and create an image For this I cut a square piece of fabric and fold it in half I sew the edges with a little space left I am translating it I select the spot I want on my skirt and sew it from the top Then I fold my arms into a thick layer to make a double arm I will leave from here I fold the inside part in half and sew it vertically from both sides I am also folding the bottom part of my skirt twice and sewing it in Then I mark the position for the eyelet and the size of my button and I make one eyelet The other front piece that matches my button I sew it next to the other one about 4-5 cm away to create an image Usually there is another button in this inner part of the jacket but I sew it in a more practical way My coat is now finished I took the trousers patterns from a tailor I couldn't show the pants in too much detail so the video wouldn't be too long but feel free to leave a comment if you want I can film a video of me taking off the mold and sewing pants I am placing this double-layered fabric in this way I am cutting 10 cm longer leaving a 1 cm seam and doubling the cuff I also cut from my own pieces of fabric I will consider the flax and the hemp in the same fabric as I do in the dress I take a back piece and a front piece I stack them facing each other From the neck to the tailbone I needle and stitch the other side from waist toe So I end up with one leg After creating both legs in this way I turn one leg flat and tuck it into the other leg I am aligning the sections and stitching them towards the waist This will form the center seam of our pants That is this part I tuck in the edges of my fabric and sew them together with needles I'm doing it this way so it looks like a pile You can also twist it directly inside And I'm sewing from the edges Then I measure and cut my tire according to the waist size and join the two ends with a zigzag stitch In this way I fold my tire evenly and insert needles at regular intervals from all four sides I align the four seams of my pants and pin them together I will sew by pulling the thread between the two needles and will have passed the thread evenly through the fabric I am sewing the two sides of the elastic with a zigzag stitch I am getting such a nice little bag I fold the lining in thick layers as I do with the jacket sleeve and sew it along the edges I am folding the half of the skirt outward and sewing it vertically from both sides Finally I cut a 12 cm wide strip for the belt I double it and sew the edges I turn it over after the dictation I am bringing the seam out and rolling the edges inward and stitching them this way I had straightened the ends but in the original they had made them a bit slanted and later I changed them as well When I iron it like this I also get my belt like this