We’ll show you one of 5 ways to wind up extension cords. Many people use cord reels or storage devices. How good are they and will they work well for you?
This is one in a series of episodes showing different methods of winding up and/or using extension cords. In this series, we will show the daisy chain, over-and-under, figure 8, cord reel, and cord bucket approaches.
This episode features cord-winding storage devices, as well as reels with integrated cords and outlets, as well as simple reels that you supply with your cord.
No matter what method you use to wind up your cord, always get the BEST extension cord you can afford. The cheaper the cord, the stiffer it will be, especially in cold weather.
Extension cords come packaged in a coil (much like a garden hose) or looped into an oblong shape with a sleeve around the middle. First, unwind the cord and stretch it out somewhere in the sun. It can be on the lawn, sidewalk, or driveway. Leave it out for about an hour to get the cord warm so it can “relax” and lose any memory it acquired during the time it was packaged. If it’s winter when you get your cord, place the cord somewhere warm until the cord is supple. Now you wind up the cord using the method you prefer.
Portable cord reels come in two basic versions - empty reels that you supply your cordage, or integrated reels with cordage supplied and typically a set of outlets. Although similar to mounted reels seen in shop settings, these are meant to be carried to and used at the job site. Remember this cardinal rule: you can not draw more power combined, from all the outlets, than the cord or outlet it is plugged into can supply.
If there is an integrated breaker in your cord reel, too much power draw will “pop” the breaker. If there is no breaker, you risk heating the cord, melting terminals, or possibly starting a fire. So, be careful.
Besides a breaker/reset, another worthwhile feature to look for is a self-retracting reel. This makes it easier to wind up the cord when the job is done.
Lastly, if you are buying a unit that has its own cord, get the best quality and highest capacity (at least 14 gauge!) you can afford. Cheaping out here is not wise.
If you want something even more economical, there are a variety of plastic cord wrap devices or wheel-like products. You get what you pay for. Plastic has a limited life, especially if it is in the sunshine regularly. However, these are quick and inexpensive, and easily replaced, so you need to decide what you need and the economics of your choice.
There is an active discussion (argument?) about whether or not you can run power through an extension cord that is coiled. Yes, you can. You just need to be sure you are using only about 80% of the capacity of the cordage. This is seen with the ratings that are labeled on cord reels. Power is routinely run through coiled conductors, but because they are coiled and can cause increased resistance (and related heat), they rate the capacity of the cable lower than an uncoiled cord.
Whatever method you use, taking the time to coil up and stow your gear at the end of the job pays off in having gear that will last a long time, and will allow you to set up faster on the job, as well out pack out sooner and be on your way.
While you’re at it, check out these OTHER methods that trade professionals use too:
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Today, we're going to talk to you about another
way that trade professionals use to wind up their extension cords on the job site. We're going to
look at some cord reels, compare some of them, give you the good, the bad, and ugly. Stick around
and I'll show you what I mean. Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Today, we're
talking cord reels. Now, we have produced many episodes about winding up different power cords,
and we get some people that just ride and say, why mess with all of that? Why don't you just
get yourself a cord reel? It's really easy. Just wind up the cord on it, and it's fast. You can
throw it in the truck and get home or set up quickly in the morning to work. Well, here's a
little bit of just some of the common cord reels that we found at our local big box store, and
we're going to show you a little bit about the pluses and minuses of them. Now, one thing that
is really interesting on no matter which cord reel you use, when you wind up cords like this,
or around an H handle like this, or even this type right here, which you can see right here,
the photo, how that is meant to be used. Well, all of them have inscribed somewhere on there,
make sure you unwind the cord completely before you use it. Now, that is a statement of just making
sure in case there is a problem with heat up or that sort of thing, the manufacturer is not
responsible. The reality is I've seen these used on the job site for many, many years, and very
rarely are they fully wound out. So really what gets done on the job site is just not
overtaxing the cord with too much power draw to cause a problem. But if you want to be absolutely
safe and follow the manufacturer's instructions, you're supposed to wind out the cord completely.
Well, let's look at a couple different types right here. This is just a plain spool cord.
It essentially almost looks like the hub of a wheel, or a rim of a wheel, where you have two
flanges on the side, a crank, a couple places to catch things here. Inexpensive, probably between
five and ten dollars for one of these. They'll last a moderately long time. What you're going to
do is they have a couple little straight feet on the bottom allow you to stand it like that.
Many people just stow them flat like that, and that's really how they ride around in the
construction vehicle. Now, there's a couple things on this that I would mention. One,
you end up having to put the plug end out the side, and then when you stow it,
you have to pull this through here and clip it into the side. So this particular manufacturer,
I don't think thought it out really well, and here's why. The side where you can put these
through and hang them out when you're winding it up, for instance, when you're winding up the
cord like this, as you crank this up, the cord end is whacking as it goes. And you say, well,
just use the other side. Really? They didn't put the openings on the other side,
although you could just dangle through this, but on a triple tap like this,
I just had to hang it out someplace. So I could wind it out the other side,
but the way they designed it to clip it through like that, you have to kind of do a workaround
if you don't want that cord end whacking you. How this is used in reality, you hold this reel
right here, and as you pull it, it simply plays out. You would plug this in or tie it off on the
side where you're going to energize the cord, and then roll this out to where you're going to work.
And at the end of the time, here, we'll just do this. At the end of the time, you're just going
to wind up your cord like this and work to try to get it as even as possible around there. And
that's how the cord reel works here. And then you would just tuck the end in through one of the side
openings. So much for that type of reel. Now, second one we'll look at here is an H-type.
And if you look down inside here, this has got kind of an interesting little feature. You plug
in the female end of the cord into this little male connector here, and then what that does is
that energizes a triple tap on the bottom. So you've got this right here. You wind this around,
and one thing we found out right away on this, and this is probably a $10 to $15 device,
that you have to use a very light gauge cord on this. This is, I believe, a 14-gauge cord,
and it does not want to go in the clip. So I'd either have to shave the clip. So they're thinking
this is actually going to be used with 16-gauge. I don't like to use 16-gauge cords on the job site.
I think they're asking for problems. You can't really put a lot of capacity onto them.
But, you know, you could use this like this and kind of wind this around and stow it. And so
there's, you know, one way you can do it. It's not really a reel. It's really more a wind-up
device, but that is another way that you can handle it. Now, this particular one is kind of
interesting. This is just a handle. It's got a, you know, ergonomically, it's pretty nice. It's
piece you see right here is meant to be cut out, knocked out, and then mounted right there
to create that little stand you see right there on the photo, so that this would stand up when
it was wound up. You know, it's okay. And then you would wind the majority of the cord or assured
amount up in this section, up at the top, as you can see in the picture, and then the majority of
it down below, and then secure off the cord right here. So this gives you a place where a lot of
cordage is wound up in a short area and easy to handle and carry to the job site. Inexpensive,
again, $10 to $15 or something like this, and works reasonably well. So if you want a fast,
easy way to do it, that'd be fine. That's that. Now, there's another type that I want to mention
to you here, and that is where you're not providing your own extension cord. Instead, what you're
doing is purchasing a little spool that has the cord wound up in it, and then you have a set of
outlets out here. Now, a couple things to mention about this. This one's really inexpensive. Here's
some other ones that I just took some photos at the local big box stores to show you some of the
types that are available. And so like anything else, you're going to get what you pay for. The
higher the price point, the better features, better construction. There's a feature that you want to
probably look at, and one is this is a manual wind up. So when you pull this and you've used it out
there, when you're done, you have to take the spool here and you have to wind this back like this.
Sometimes it works smoothly, sometimes it doesn't, but you know that's the manual wind up. Some of
these have almost like a tape measure, the idea you let it go or push a button and it's got a
recoil spring in it that winds up the cord for you. They're moderate in length, and as always
when you are drawing power from a set of outlets that are powered by a single conductor, the total
draw on those outlets cannot exceed the wattage rating and amperage rating that this cord can
supply. So you just need to watch those. So that's another way to get power on the job site and that
makes it easy at the end of the day to do it. If you'd like to check out one of the other methods
for winding cordage, check out this video that we produced for you. And while you're at it, take a
at this other video that YouTube thinks is perfect from our catalog for you.
Hey, until the next time, this is Dirt Farmer Jay from DirtFarmerJay.com