K-Line O27 Remote Turnouts: Features And Wiring

Toy Train Tips And Tricks
92 followers
46 Video Views·Mar 3, 2026
If you are an O27 operator, check out K-Line's remote O27 and O42 turnouts. They are feature-packed!
Hello again, this is Mike with Toy Train Tips and Tricks, and in this video we are talking about
K-Line's line of 027 turnouts. These turnouts are available in both 027 curves, as you see
here, and also with 042 curves, the wide radius variety. Operation is identical
in both of them, and same with the wiring, so it works with both of them. Now, K-Line
was very big in the 80s, 90s, early 2000s. In the late 90s and early 2000s, they were one of
the big three manufacturers of O-Gage at that time, Lionel, MTH, and K-Line. Unfortunately,
some financial troubles, some lawsuits, etc. K-Line ended up being bought out by Lionel
and absorbed into their line. But, K-Line did make some very nice 027 turnouts. Their track
is Lionel-compatible and Marks-compatible, too, although, if you're doing this with Marks,
if you have the single-reduction fat-wheeled Marks, those don't go very well with these.
But, hey, the double-reduction motored Marks and Lionel products and MTH and other 027
locomotives and cars will work with these just fine. So, what we have here is we have a left-hand
027 turnout, and you see the first thing you'll notice is the lights. Nice feature.
When properly wired, we have a green light on both the switch and the controller, and when it
throws, red light on both the switch and the controller. So, lighted indicators. That's nice
on the layout. Adds a little bit of color and action to what's going on. Secondly, these feature
the safety non-derailing feature that most 027 turnouts have. Lionel's from 1953 onward
and such. And what that means is, well, first of all, in order to make the non-derailing
feature work, you have to make sure that here and here, the inside, these have to have insulated
track pins. That isolates the section of rail so that when the metal wheels of the cars
go here, it completes a circuit from here to here and throws the switch in the proper direction.
So, if the train is coming this way and the switch is thrown against it instead of derailing,
it automatically throws when the train approaches. Same thing for this way,
if it's thrown against it. Gotta get it on the track here so I don't short things out.
And boom, so the train can go on continuously. Obviously, coming in from a facing point
direction, it doesn't decide. Another nice feature about these K-Lines that Lionel does not have
is the K-Lines have a circuit, a current limiting switch, so that when the train
is on the rail, on a Lionel switch at this point, you would hear the motor humming
continuously because the wheels are still completing the circuit. On the K-Line,
once the switch is thrown, it cuts off power to the solenoid. So, it saves the motor from
burning out, especially if for some reason the train is parked on the turnout for a long time,
so you don't have that continuous feed of power going to the solenoid. A very nice feature.
Lionels do not have this. So, you've got the non-derailing feature, you've got the light,
you've got the lighted controller, you've got the current limiting switch, all nice features.
Okay, so looking at the turnout from the side, I've pulled the track apart so you can see here
are the plastic insulating pins. These are very important. If you put regular pins here and then
you power up the track, you will feed power to the switch motor and cause problems. The switch
won't throw right and you could possibly burn it out. So, you want the plastic pins. They can be
black, they can be white, depending on whether these are Lionel, you can use K-Lines which are white,
whichever. If you don't have any, a wood toothpick will work in a pinch until you can
get some. So, we also see the big difference between the K-Line and your typical Lionel
turnout is the number of posts. Lionel will have three, K-Line we have five. So, what do these
five posts do? Well, starting here on the right, this post connects to your common. This connects
both to the common rail and also goes, if you're using the K-Line controller, the center wire
of the bundle of three, the one in the middle, trace it down, that goes to your common post
right there. You don't necessarily have to have this wire. I've got it here just on my workbench,
but normally your common is provided by the track power coming from elsewhere.
Or, if you're using something besides the controller, you can use that as an extra
lock-on to provide common to the switch. But basically, again, this is your common
center wire of your controller, goes there, and you can also add a common
to feed power to the track, if you so desire. These next two come to the controller and they
connect to the opposite sides of the solenoid, the switch motor, and depending on which one
is activated by the controller, controls which way the switch is thrown. Which one goes where
I connect them and reconnect them, basically trial and error, in order to get them to match up
with the controller. Let's turn our power back on here so you can see what's going on. Okay,
so basically the way the controller works is your hot is provided elsewhere by these posts
we'll talk about in a moment. Your common comes from your track, goes here, goes out to the
controller, and the controller is essentially a single-pole, double-throw, momentary contact
switch. Just a big one. And as you go back and forth, it will change and make contact
to throw the solenoid and sends the common back. So this is all using common. These two
go to the switch controller. Now, this next one, and you see this bar, this comes with
the switch if it hasn't been disconnected. Here you can have your choice of whether you're using
track power or accessory power to power your turnout. In this configuration, this
goes to the solenoid, goes to to provide power. Here I have it hooked up using
power from my workbench, but if I were using track power and I had...
This light's going to go off here. Okay, if I were using track power, I would have it just like this
and as I turn the power up to my track up and down, it would affect the amount of voltage going
to my switch. So I wouldn't have to do anything if I just wanted to use track power.
However, if I want to use... There we go. Disconnect this puppy. If I want to use
accessory power, I swing this out this way and attach my accessory power from my accessory
transformer here. I find for these 14 to 16 volts works great. Closer to 14, if you go with
the full 16, your light bulbs can get very hot and they tend to burn out a little faster.
But you don't want less than that because you want to make sure you get a good solid
throw from the turnout. If it goes only halfway and the circuit, the power limiting switch activates,
then you might not get the automatic anti-derail feature like you want. And it might throw halfway
in between and a train coming here, facing point, will split the switch. So 14 to 16, I wouldn't go
less than 14 volts on that. So if you're using accessory power and wiring it up here, then this
becomes an optional. You could run track power here and use this as an additional track power
lock-on for your layout because this feeds to the center rail. So when this is connected across here,
you're taking power from the center rail and sending it to your solenoid. That's what this
is doing. So this attaches to the solenoid of the switch motor. This is your hot. This goes to the
center rail. Slide it together for track power, separate it for accessory power, and then this
becomes an optional extra power feed for your center rail. And that's how your K-Line
turnouts operate, whether it's the 027 version or the 042 version. So there you go. I hope you
liked the video. Like it, subscribe, share, tell your friends, tell your neighbors, and come back for
our next video. Until then, happy railroading!
