Roland JC 120 Enclosed Back

Hey Gospel Guitars here. Thought I'd share a little adventure I took a couple days ago with my Roland Jazz Chorus 120 amp which normally has an open back. As most of you know mine had about a four inch piece of MDF board that went across the back and I had some MDF board laying around that was the exact thickness to fit in place of that little board but covers the whole back and I believe I went 14 inches high and 22 inches long and it just fits right in place and I use the original two screws that come on each side to bolt it in. It tightened up the sound from the front. I'm used to playing in enclosed cabs you know such as 4x12s and enclosed 2x12s so I was always wondering if it's the openness of this that sometimes I don't like when I'm going on distortion and heavy metal tones. So this did tighten all that up so the sound is all focused and forced to the front of the amplifier. So you can try this too if you've ever been curious whether you like it or not. It's easily undone just unscrew it and put the original little board back on. So that's just a little adventure I've been dying to do and I finally got around to doing it so I thought I'd make a little quick video on it. So keep rocking, subscribe and let everybody know about me. Thanks for watching.