No cooling on 2014 Carrier, Freezing up, X-13 replacement

This customer called and said his system was freezing up and I immediately saw that it was flooding back and I did not think the blower fixing to get into that. There's my air handler right there. All right first I see that this is a carrier 2014 system and somebody has written I've got an X13, so I'm just going to see what's going on. The cabinet is soaked. X13s are really easy to diagnose compared to some of the other ECMs. I can't get my nut driver on with that. Somebody drove that in with an impact. You can see it's got an angle. Forgive me if I turned you all upside down. I can see that motor just wobbling just a tiny little bit. Do you all hear that? hmm so uh we know it's getting voltage but i'm still gonna there's a you gotta check you know i'm looking for a disconnect i do not see one lights onboard on two let's get a call look on this nameplate horsepower all right so i can either replace this with another ECM or a PSC I know this he just bought this house not too long ago so i know it's not be under warranty seven years old and new homeowners so no it's not under warranty so i think i'm gonna go ahead and pull this out i'm trying not to get shot while i got that out we got full voltage PCM for this my truck will give him the option of a PSC so we'll see and here i just verified half horsepower 4.1 amp 1050 rpm all right this is what we opted for this is the X13 replacement rescue motor and as you can see half horsepower 1075 208 230. i don't have my camera with me today i have i'm filming with my phone so um forgive me if we don't get this but I'll try to get video when I put it in, all right we got our power hooked up and this is going to be my low voltage when it power's up, it's going to start rotating one direction I'm going to stop and go the other direction, it uses torque and amp draw to tell which direction it's supposed to be going I'm just going to put this back together and we're going to check pressures outside all right, this one turned out good, this is a little bit high I waited a while and started to stabilize, took that one while we're here, thanks for watching