Sunday call, No cooling, looking for reasons.

Guys, this is one that we put a disconnect on not too long ago. It's moving some heat. They said it wasn't cooling. Pressure's on it real quick. As y'all can see, this is, the head pressure looks a little high. The suction looks normal. We may have something else going on, like a condenser fan motor failing or something. I'm about to start checking capacitors and bearings and fire it back up. you can tell this is an older system they don't make them like this anymore with separate spark igniter here's my capacitor for my fan motor so we're fixing to check both of those i can see that this is a five and it's reading 4.84 the um compressor capacitor 42 i don't look too healthy but those bearings feel good check my pastor for the fan and i swear it looks like something that's burnt right there that's reading 8.5 i don't know if y'all can see that 8.5 microfarads let's pull it and see what that's supposed to be i suspect a 10 but um not all of those spades are good some of those look like they got hot and burnt yeah that's supposed to be a 10 but replace this i'm gonna check the bearings on that blower motor and what i say this was reading like 8.5 and that's plus or minus six percent so yeah this is low enough to replace i just i'm gonna check that blower motor real quick this is we are fixing to check that heat exchanger orange brown black red the stainless heat exchanger so that has been replaced that shaft looks like it's had some oil on it preemptively because i think it may fail it's a weekend i may not get approval until just wait until it completely fails but um inside and i checked the temperature difference the thing is working um a high head pressure on that thing makes me think that it has been charged with an alternate freon what was clean so i'm just gonna quote them the motor and the blower wheel we get it