🛠️ How to open ASUS Vivobook S16 (S5652) - disassembly and upgrade options

Hey everyone, today we are opening the ASUS Vivobook S16. Find the full review on LaptopMedia.com through the link in the description. Let's begin! Start by removing the four screws securing the bottom panel. We're using a Torx T5 screwdriver. Use a thin plastic pick to release the bottom panel. Stay shallow to avoid damaging components. The bottom panel is off. We need to disconnect the battery before working inside. One M.2 slot takes 80mm drives. The processor is underneath this cooling plate. The soldered RAM is likely beneath this shield. One fan and one heat pipe handle cooling. This soldered Wi-Fi 6 module cannot be swapped out. To disconnect the battery, slide the metal locking clip back, then lift the connector straight up. Watch the tiny components nearby. The connector could knock them off. Now remove the screws securing the battery. The battery holds 52.5 watt-hours. Let's remove the SSD. This 256GB drive uses PCI Express Gen 3. Reinsert the drive. This slot supports PCI Express Gen 4x4. Set the battery back in place. Seat the connector, then carefully slide the metal lock closed. Now tighten the battery screws. The pack uses three lithium-ion cells. It can be replaced without removing the motherboard. That covers the battery, SSD and cooling layout. For performance, display and battery life tests, visit LaptopMedia.com. Thanks for watching and don't forget to subscribe.