How To Install A New Interior Door And Frame, From Start To Finish!

The Stone Cube
31 followers
18 Video Views·Nov 3, 2022
How To Install A New Interior Door And Frame, From Start To Finish!
Hey everybody today I'm going to show you how to hang a door so stay tuned and check it out.
All right so the first thing to do is assemble the door jamb. Now your door jambs might already
be assembled and mine may have been as well but I had them stained and pre-finished them before
they sent them to me so that's why they came knocked down like this. It's really straightforward
though just put a little bit of glue here and drive some brad nails in. Let me show you. So
just a little bit of glue here and then push them together. Make sure they're tight and I'm driving
inch and a quarter brad nails into it just like that. So one thing to kind of check for
is that your door jambs are flush. In this case I've got a little bit of drywall that's
kind of sitting proud of this door jamb right here the rough opening so I'm just going to trim
that back flush. All right so we're down here on the bottom I'm starting on the hinge side right
here that way I can get this as plumb and straight as possible and then work my way around the rest
of the frame. So picked up a couple shims like this you'll notice that they're in this wedge
shape. Best practice instead of just inserting shims from one side since it's in that wedge
shape if you just do it from the one side it's actually going to kind of tweak the frame either
in or out like that and you're not going to end up with a square and straight frame. So instead
best practice is to insert a wedge from each side that way no matter how far in you have to push
them you're always going to get this flat surface right here and your frame is going to be nice and
square. So really just to start take a shim from each side and throw it in there and then what
you're going to want to do is you're going to want to make sure that this front edge is pretty flush
with both sides so this edge is flush with this wall same thing on the back side this edge is
flush with the wall on this side and your walls aren't going to be perfect though they'll be pretty
close but they're not going to be perfect that's where the level comes into play so we'll put a
level on there and we'll get that nice and plumb. So right about there is plumb and I'm just going
to drive one in right now and then I can come from this edge and see how close we are.
All right so that's going to work out nicely so I'll just drive a few more right in here
all right and there we go. You can cut these off as you go or you can save it to the end
to trim these back just take a sharp blade like this give it a couple swipes and then break it
that way there you go. Sometimes you'll have enough left over from the cutoff that you can
use these again but if not I think a pack like this is like a buck and a half or two bucks so
they're not that expensive. So then that's pretty much the process right so we're gonna
insert a couple shims in we're gonna just ensure that the frame is nice and plumb both on this edge
and on this edge as we move up and just kind of repeat that process. All right so basically on
this first side on the hinge side I like to start by putting shims behind each of the spots where
the hinges are going to be. So we got another hinge right here so I'll start there just get
those tucked in and we can start pulling this door frame either in or out. I know that it's
got to come out a little bit more this way so we'll just push those shims in a little bit more
towards each other. That looks pretty good right there we'll check this front edge again
that is looking right on so we can drive a couple more brad nails in here.
Looking good we'll move on to the next one. All right so up at this top one same process
throw some shims back there I think in this case it has to the frame has to go towards
the rough opening right about like that actually that's looking pretty good. Again we'll check
this front edge that's looking good and then drive a couple brad nails in. So now we're looking
straight at it here we can see we got our shim down here and one up here and you can see if you
press on that it's a little bit flimsy. So then once I have the shims behind where the hinges
are going to be I like to come back and split that difference between them so I'll do another
one here just to take out some of that flimsiness and then the same thing between the middle and the
bottom hinge. And these I mean I always like to double check that it's still nice and plumb
but basically you already have that set and then you're just putting in these to take out some of
that slack here so when you push these in just push them until basically friction will hold them
in place. Again you can always double check though that's looking spot on. All right there we go so
we've got the hinge side all installed it's nice and plumb and straight now we can move on to this
other side. So as we move to this other side and secure this in place it's pretty much going to be
the same process there's only one more thing I like to kind of double check along the way
and that is this dimension right here. So from this inside corner to this inside corner I want
to make sure that I'm maintaining that same dimension all the way down. So I know that this
is 36 inches so I want to make sure that this whole frame is 36 inches wide all the way down
so that along with also making sure that it's nice and plumb and square. All right so like I
said I want to maintain that 36 inch dimension between the frame all the way up. So we'll start
down here at the bottom and just make sure that this is starting at 36 inches. Put our tape in
place like that and it looks like right now I'm at 36 and 3 8 of an inch so this frame has to come
in 3 8 of an inch to right there. All right and then I want to make sure that it's flush with
the wall right here. Another thing you can take a shim these are pretty straight like that and just
make sure you can kind of flush it up like that. Really any straight edge will do the same thing.
So we got that we got our 36 inches right there and then I can throw a couple shims in
down at the bottom here. All right just like that still got our 36 inches
bring you over here. All right so you can see we're right on 36 inches down here
we got our shims in place and now we'll just drive in a couple brad nails.
All right so same thing I'll just work my way up the frame like this constantly checking for plumb
and checking that it's nice and level and also checking that 36 inch dimension.
All right so for the top I'm just going to fill up some of that space with some three quarter inch
plywood. So I cut a couple scrap pieces to fit in there and then I can fill the remaining space
with a couple shims. The important part here is to make sure that this middle isn't sagging down
so whatever that dimension is I can take a measurement from these outside and just make
sure that right in the middle it's that same dimension. So it looks like I'm right at 79 inches
yep same thing so then as long as I got 79 inches right in the middle I should be good
and it looks like I do. You can also double check that with a level. All right then just attach the
hinges to the frame. I've got my clutch set to six. Then I could cut the top doorstop to length
and nail it in place. So here's the box of hardware we got our door handles we got this guy
got some screws got this guy and I'll also need this. So if your door is routered out for this
shape right here this plate you can go ahead and just install this as is. In my case my door is not
so I'm gonna have to pop this off and then put this in its place. So for that just find something
like this and pop that off like that it's like that then you're able to turn this piece
and slide it off there. Now just put this guy on here like that and there you go.
So we can install this plate right here just like that. All right and then this piece will go in
here like this so that this tapered edge is going towards the frame I guess. You can kind of push it
in there and then take a scrap piece of wood and push this down and then just hit it a little bit
with a hammer. Then just take your handles like this and just come right apart and feed them in
there one on one side one on the other just like that and then drive in then just drive in the
screws. Sweet seems like it works pretty well. So one thing I like to do to kind of quiet the door
when you close it is add some of these little stick-on felt pieces. So I just do three one on
the top bottom and then somewhere in the middle. Now it's time to move on to the door trim. So I
like to start with the top piece here. So what I've done is I've cut a 45 degree angle on this side
and now I'm just measuring from this short end right here over 36 and a half inches. So in my
case I have a 36 inch door so I like to add a half an inch to that so that gives me the 36 and a half
inches and again that's on the short side. So I'm just going to flip my saw over this way.
There we go. Now let's go install this. Alright so in my case I'm just going to put this piece
all the way up to the underside of the soffit right here and then just make sure that it's
spaced evenly on both sides and then just drive it home with a couple brad nails.
Then I can measure for the two side pieces. So I'm just going to put the tape on the floor
and measure up to this corner right here. So it looks like it's 79 and a quarter.
Let's see if that's the same on this side. It should be pretty close. Yeah it looks like it's
79 and 3 16ths so a sixteenth of an inch difference. And a tip to help hide that fresh
cut edge just take a matching marker and color it a bit. This will help hide the raw edge just
in case you don't get the cut perfect. Then it's just as easy as putting the trim in place and
driving in some nails. And finally the last thing to do is fill in all the nail holes with some
wood putty. If you guys enjoyed this video it'd be awesome if you could hit that like button down
below. That just lets YouTube know that this was a decent video and that maybe it should share it
with some other people to watch. And if you haven't already consider hitting that subscribe button
down below as well only if I've earned it. That way you're notified every time I release a new video.
And until next time, thanks for watching.
